Best Home Theater Audio Rack

Audio 4 Feb 2023 10+ Comments Open

1. Outlet Power Sequencer Conditioner Controller

Outlet Power Sequencer Conditioner Controller

Features Jack Balance, Stereo and Mono Bridge, Comprehensive Front Panel Indicators, and a Bridge Control switch. 2200 watt power The power conditioner is designed to improve the quality of power supplied to your home appliance, music production studio equipment. The power supply controller provides clean AC power. There are 8 outlets. The audio power conditioner surge protector has 8 US standard outlets and independent outlet switch control for each connected equipment. The integrated micro-controller has a precise AC voltage and ambient temperature. A digital display. The rack mount power supply has a digital display with real time data, a step time display in 8 segments, and a switch for power sequence. The mountable power supply is equipped with a dualusb port and a power filter. The front panel has the ability to link over 100 units. The safety features ensure the safety of equipment. Features built-in safety and surge protectors. It protects your devices from interference.

Brand: Pyle

👤I wanted to reduce the pops in my speakers. The noises I made when I installed the power conditioner got louder and more aggressive. The On/OFF switch stopped working last night, I have owned this for about a month. Individual buttons are useless. Now permanently turned on. There is a total piece of rubbish. Don't buy this junk, do yourself a favor.

👤I like the item, but I don't leave many reviews. I'm returning this item because of a faulty power cord. I'm glad I noticed it when it was on the go. If you touch the plug at the outlet, the unit will either not come on, shut down, or turn on and off in a row. If you've never had the displeasure, it's not a great noise when intermittent power hammers a high gain guitar amplifier connected to a wall of paper. You will run for the switch, hoping the smoke stays out. If you lose ground, you will get a lot of volts to ride on 6 rails. If I can help it, I won't trust my rig or myself to do shoddy work. I grabbed one of my old regulators for the time being and may try another one in the future after watching some more reviews for QC issues. I have too much money to trust failing.

👤Works well. Since I didn't want one component to be switched at all, Outlet #1 on the back panel is switchable to either participate in the sequence or stay on all the time. When the center pin is grounded, the power on sequence begins and the power off sequence begins. It doesn't open. It has to be grounded continuously. There is a The supplied cable leads to another unit. I made an interface using a relay that was powered by my receiver's 12vdc subwoofer signal because I couldn't find pin assignments for it in the documentation. The relay's contacts ground the Pyle. I've read some reliability complaints, but mine has been reliable for 2 years.

👤The PS1000 worked as advertised. There are two problems that make it not ready for audio. The unit's voltage reading was about 10% low. We were able to calibrate it because my business has a service shop. When the unit is first powered on, the big concern is what happens. Random outlets will turn on for 1-2 seconds when power is on. This is not acceptable for live sound or other pro sound uses. This problem can be minimized if the purchase is used for a specific purpose. This is what I expected from this price range. It gives useful functions for non-critical applications.

👤The only options I had for my home studio were a power conditioner and a scenography, but I didn't really need them. The PS1000 power sequencer conditioner unit had 8 outlets. Sequencer Conditioner Outlets order 1 was the order I ordered and installed in my studio. The guitar effects pedalboard is 2. The audio interface is external. Small guitar amplifier. Small studio monitors. I have outlets that are free for use. Outlet 1. The individual on/off buttons and the power strip work perfectly. I will be testing this unit over the next few months. I am very satisfied with this purchase and I rate it 5/5.

2. Wireless Bluetooth Power Amplifier System

Wireless Bluetooth Power Amplifier System

Bluetooth is a cannabinoid. The mini professional integrated indoor house stereo receiver has a wireless music streaming feature. Works with today's latest devices including smart phones, tablets, and computer. The Pyle 6 Channel powered amplifier receiver is perfect for your PA and home theater acoustic surround sound system. You can use 4200W power for multi speakers and enjoy high quality amplified audio. The personal portable multi-zone audio digital amplifier box has a variety of external sources, including 3 pairs of RCA audio input for the CD player or tape deck. Also has a radio antenna. There is a voice priority button. The surround sound amplification mixer device has a MIC talk-over function where the background music is minimized by pushing the button when the signal is inputted to MIC1. It is used in announcements. There are EQ controls. The professional compact rack mount sound amplifier has buttons for power and mp3 controls. An independent channel volume control center is included in the W/ separate rotary knob controls.

Brand: Pyle

👤This unit has all the features we needed for an outdoor pavilion, for a very reasonable price. We didn't need to buy any other equipment other than the wireless mic receiver. I was going to have a problem with other units because it converts everything to mono. The sound is clear. The MODE button does not do much more than 85% of the time. You can get it to switch modes, but you can't do it again. You can't go into other modes without this button. You're stuck in Aux mode. Tech support is what it is called. I was told that I should return the unit or exchange it. Immediately, Amazon sent another unit. Within 2 days, I had it. The same problem is controlling the mode. I'm not sure how to proceed, I need to ask for a third unit or figure out the secret to unlocking the features. Our organization is relying on me to get the audio working correctly in the pavilion and I am under the gun. There is an update. The second unit was also bad, and I had to keep asking for replacements until I got one that worked. The third unit I received from Amazon had the same problem. I can get the Mode button to work on at least one occasion. I decided the mode button problem is not acceptable after some time. I asked for permission to bring it back under warranty. They sent me a "warranty packet" to fill out and include my CC number for return shipping and handling after a number of attempts. It has been a nightmare. They said to expect a 10 day turn around. It has been 20 days. I haven't heard anything. I used Facebook messenger and called. The first two did not respond. The phone call was useless. I had to repeat my name, number, email and so on. He promised to send me a warranty return packet, which I already filled out and shipped with the unit. I couldn't make him understand why I was calling. Maybe because it sounded like a drum practice in the background. He said he would call me back, but didn't ask for my phone number, and it sounded like he couldn't find me in the system. He wanted the call to end. We hung up because there was nothing we could do. The return was signed for by the person who received it. I'm at a loss. If I ever hear from them again, I will update this review. The mode button didn't work after I received the unit back. There was a note in the box from the technician that said to press it more slowly. I had already done all of the pressing lengths. It was the same as before when trying again. I gave up for a while. I opened a claim with SquareTrade after the 1 year warranty ended. I bought the extended warranty with the original unit. I shipped the label to them for repair. It came back in a few days. I was very excited. The Mode button does not do anything. SquareTrade was called. I was sent another label to ship it back. I made a video of myself turning it on and trying to switch modes and put it on a drive for them to see. I received an email a few days later saying it was not repairable and they were issuing a refund for $221 which was what I paid originally. The price has increased to $259. I ordered a new one from Amazon. The Mode button works 20% of the time instead of 10% after I plugged in the fourth unit. It's still unacceptable. I can't teach anyone how to use all the functions of this amplifier if they can't use them. When the next chapter occurs, I will update this story again.

3. Outlet Power Sequencer Conditioner Controller

Outlet Power Sequencer Conditioner Controller

A built-in cooling fan. The sound amplification device has built-in cooling fans for maximum air circulation in the unit to keep it from overheating and to keep its performance to the maximum. The Professional Power Sequence Controller is designed to improve the quality of power supplied to your home appliance, music production studio equipment. The power supply controller provides clean AC power. There are 10 outlets. The compact audio power conditioner surge protector has 8 rear panel power supply outlets and 2 front panel "always" power outlets, which ensures enough space for multiple appliances or computer component to be properly plugged in. 1URACK MOUNT: The single rack space metal housing is rugged. It is lightweight and completely rack-mountable, which saves space, and it weighs just 52.95 lbs. The rack mount power conditioner has a simple and hassle-free one-button operation. Pressing the front panel power switch is all you have to do. There is a port for external device charging. Protects your devices. Features built-in safety, spike, and surge overload protection that protects your devices from noise interference, voltage fluctuations, and electrical surge. Clean AC power ensures the safety of electrical equipment.

Brand: Pyle

👤Unlike most reviewers, I opened this thing up. Surge suppression, spike protection, power conditioning, and anything else that affects the quality of the power is not allowed. The input power cable connects to the bus bars. That is literally it. There is no overcurrent protection. A circuit breaker is not a fuse. No. I was surprised that the unit's supply cord is 10awg, but it has a 5-15P plug. The plug is rated for 15A, but it seems like a 10awg cable would be rated for 30A. The manufacturer went the extra mile with the heavy duty input power cable, but the front panel receptacles are connected by 18awg wire to the rear bus bars. If this were connected to a common 20A branch circuit, it would be a hazard. The specifications are confusing. The listing is intended for sale in the North American market and would operate at 120V. The description says "13A" and "2000W". 13A at 120V is 1560W, and 2000W at 120V is 17A. If you're running loads with an awful power factor and the VA measurement disagrees with the W measurement, it can't. ampacity is the only important factor since this thing is straight wiring from plug to receptacle. The port is a joke. It put a respectable 4.98V under no load. At just 100mA, the Voltage dropped to 4.7%. It went down to 4.5V at 200mA and then shut down at 700mA. The port could be used to charge low current devices, and it could also be used to light a small fixture. Maybe. In the fine print it says it is a 200mA port, but 4.5V is still a bit low. As for the good? It does what it says. The rear receptacle is sequenced at a time with a click of a relay. I would have expected the steel to be lighter. All the receptacles are properly grounded, and the chassis is also bonded to ground. The display on the front was accurate. This gets one star because of the misrepresentation as a power conditioner. Again, it has no money. The manufacturer's own site makes the same representations, so the Amazon listing is not in error. The product description says "Relay: 30A, 277V AC". The relays in mine were rated 30A. The printing on them is according to that. "Max power: 2000 Watt outlet (6000 watt unit)" is confusing. I don't know what that means. I would give this 4 stars if the product description was honest and understandable. It would still lose one for the bad port and some of the borderline soldering.

👤I own a unit. It stopped working after the 30 day warranty. The warranty was still valid. After several emails back and forth, pyle finally agreed to repair the item but wouldn't send me a RA to return it. The cost to get the item back is more than the cost of the item. They were expecting me to not pay to return the item. I don't usually write reviews that tell buyers to beware. They want you to fill out a form with your credit card information so that they can charge you an additional $60 for shipping it back to you. Credit card information should not be written on a piece of paper and sent to someone else. Beware. This purchase was made in June of 2020. The unit is shortening out after you power it on.

4. Bluetooth Home Mixing Amplifier PMX3500PH

Bluetooth Home Mixing Amplifier PMX3500PH

The Pyle Home/ PA Mixing amplifier has 500 watt power. It allows you to enjoy high quality amplified audio by giving you 500W peak power. INPUTS: 6 The digital Amp box mixer amplifier supports a variety of devices. It has an AUX reader, 2 mic inputs, optical & coaxial digital signal inputs, line out, and 70V/100V outputs. The Bible has a Bluetooth-compartment. The professional integrated indoor house stereo receiver has a wireless music streaming feature. It works with today's latest devices, including laptops and computers. Front panel control. The home theater sound speaker amplifier has front panel controls with digitalLED display, AUX audio input selection, and a control center for mic volume, bass, echo, and master volume controls. RACK MOUNT: A universal rack mount design is used for the high powered home theater pro audio receiver. Additional features include MIC 1 and 2 level gain/talk-over control. Includes remote control and antenna.

Brand: Pyle

👤Background music is provided in retail environments with the installation of several Pyle PA amplifiers. The PMX3500PH has the ability to play mp3's, as well as being flexible in speaker configurations. It's working well and can recommend it.

👤The product was only used for a week. I figured out how to start. It seems to work. I will put the signals into my speaker system.

👤Love the power output! Sound is great! A clean and loud sound. The only thing I disliked was the connection. The range is not very far. I think it's about 20ft before it starts losing connection. If you're looking for a good amplified sound that will pick up some good speakers, this is the item for you. The sound is amazing, I have it connected to a speaker.

👤Excellent unit, great sound. The range is only 20 feet.

👤I bought a cheaper unit on Amazon. The remote was not very good. I returned and bought it. It is worth the money. More than adequate power. The remote works great. The deal is great for the money.

👤I have to put my phone next to it to get it to connect. There are outlyings at a concert level. My speakers are old school. The mixer is above average.

👤Me ha funcionado, el nico detalle. No tienes alcance, sido el Bluetooth.

👤En equipo, tienes una calidad de audio.

5. Bluetooth Multi Channel Hybrid Pre Amplifier System

Bluetooth Multi Channel Hybrid Pre Amplifier System

3000 watt power The Pyle Multi-Channel Pre-Amplifier is perfect for home entertainment systems. It gives 3000W peak power to be used for multi speakers, which will allow you to enjoy high quality amplified audio. INPUTS: 6 The digital amplifier box supports a variety of devices. It has an AUX 3.5mm input, 2 14” mic inputs, a headphone jack, and an audio input/output jacks dedicated for the subwoofer. The Bible has a Bluetooth-compartment. The professional integrated indoor house stereo receiver has a wireless music streaming feature. It works with today's latest devices, including laptops and computers. Front panel control. The sound speaker amplification device has front panel controls for audio source selection, echo control, and microphone volume. It also has a dimmer control. RACK MOUNT: A high powered home theater pro audio receiver has a built-in cooling fan and overload/ short circuitry protection. 2 handheld microphones, mounting brackets, and remote control are included.

Brand: Pyle

👤The amplifier and microphone are not connected to the internet. This is not a good thing. It didn't work after my husband and I spent hours following the instructions. We tried other wired microphones and they still don't work. There was no voice mail when we called customer service. We waited for a long time to speak with a rep after we called again. We got dropped off after the rep put us on hold for 15 minutes. We called again to speak with another person. The units are faulty according to the rep. I told the rep that I would write a bad review, but he didn't care and said he had done everything he could to support me. The unit is junk.

👤I'm happy with the purchase. I'm excited about the wireless mic and I can use it to make videos for my TV to sing along with. I may not bother hooking up to your TV. Attached expanding antenna is worthless. In my location, you can attach more than one antenna, but it's not much luck as I had the same issue with an old Kenwood. Since the radio app on your phone or tablet has a built in radio, you can play many clear stations from all over the world, which is a better way to fix the radio issue. Powerful Sound adjustments can be made, and you can connect your other units such as turntable, CD, etc. Can't adjust the balance on the speakers. If you prefer one to be further away than the other, this may be an issue. The customer gave instructions on how to use it. Let's do a sound check by setting the bass and treble to 100%. Listen to your favorite song. Gradually increase the volume to 80%. You can hear the change in sound when you press the button one at a time. The buttons on the EQUALIZER will not show whatMODE you are in. It should be set to the most decent mode. I had to change the battery on the remote because it was the same size as my car battery and it was the problem after being there for a long time. He was correct. It's unfortunate that there is no display to tell you what mode you are in, but performing these functions proved to me that it is working, as I was going to exchange it, and he saved me!

👤The remote doesn't work because it came with lost parts. Two of the four channels are not working. Contact the manufacturer. They were late and it didn't help. This is the newest model for 2020.

👤Wow. I took a chance because of the price. I bought a pair of Polk speakers and connected them to my patio. It has been great. The sound quality is great. It works well with other devices. I put it on the tv outside. The microphones make karaoke fun. The remove controller is weird. I put it to the side and manually adjusted the sound and volume. It is definitely worth the price. I have been keeping it outdoors and it has held up well.

6. Pyle Bluetooth Receiver Amplifier Streaming

Pyle Bluetooth Receiver Amplifier Streaming

There is a wireless streaming service. The receiver rack mount has a premium built in receiver. The receiver should be compatible with all your favorite devices. It has a range of 30' plus. Home STEREO. The home theater amplifier is a complete system. It acts like a radio with a digital display and an ID3 tag. Also has a 2.1 channel audio amplifier. You can connect to astronomer devices. The home theater amplifier has a 3.5mm aux input jack, as well as a multi source audio input and ausb flash and memory card readers. Reliable and durable: The home theater receiver is made of heavy duty metal and aluminum alloy to protect your gear for a long time. The package includes sturdy brackets for easy installation. The audio receiver rack mount comes with everything you need to start. This exclusive bundle features their top of the line amplifier receiver, wireless remote control, and hardware rack mounts.

Brand: Pyle

👤Some major problems bring down the rating of this amplifier/receiver. Sound quality is good. This thing has a lot of features for the price. The slim profile makes it possible to stack more things. The volume dial is touchy, and the difference between quiet and very loud is a couple hairs. The included remote only works on the digital inputs, not the plugged in ones, so if you want to change the volume from across the room, you may use whatever mp3s you have plugged into the micro sd orusb slots. The first one of these was sent back because the main volume control didn't work at all. The dial was set where the two loudnesses were. I wonder how long this thing will last. Hope that was helpful.

👤There are a few gripes. The remote only works with the radio modes, so you have to get up and walk like the old days to change the component volume. This is a problem during commercials. There isn't a mute function either. 2. If I leave the room or hold my phone in a certain way, the range with my phone drops out. I thought my 2x6 Daytons might explode because the amplifier pushes them so hard. The component input makes the TV sound great. My kid loves the echo feature of the microphone. 1/6” It's nice to have inputs for guitar practice. Radio works. If you need it, avoid it because it is WEAK, 3 stars, and that is what I bought it for. I still like it for tv and radio at the price of 99 dollars.

👤I bought this receiver because I had a good pair of speakers and a small amplifier that did nothing. I needed an amplifier that could give me 100 watt per channel. This amplifier was perfect for my needs. I have connected the speakers to the amplifier and it can drive them. The rear speakers terminals were not receptive to banana clips, so I had to remove them and twist in the copper ends. My other complaint is that the standard is old and prone to interference. I just use the audio output with a stereo jack on my computer, since I stopped using it. I use a 100 watt Polk Audio Tsi 100's and they drive perfectly. I would look into an additional accessory to use with this, or another amplifier entirely, if it was a must-have feature for you.

👤First off... The price! I wanted this to meet our needs alone. I'm looking to replace a receiver in a room that's rarely used, where my previous receiver stopped working. It plays a variety of audio and video formats, though other reviews state the range is poor. I don't need top-end stuff in a room that is seldom used. The room is rarely used and I want it to be functional. This device is not. Others have stated that the remote control is egads. I've seen larger postage stamps. It works, but a 1976 Ford Pinto can do the same. Doesn't mean I want one. There are two more The volume. The best part is this. The remote control's volume is pointless unless the knob volume is turned all the way up. If you have a master volume, turning the volume up using the remote control is not going to make it louder. If you turn the master volume all the way up, you can turn it down using the remote. So what is that big deal? Turn the master volume up and leave it there. The next time you turn it on, it will reset so you won't notice. Hopefully your speakers can handle it. It's a good one. The power off button isn't off. You have to flip the switch on the receiver to turn it off. Trust me, you'll want to do that when you have to turn the volume up to make the remote work. The speakers would wake the dead. I wanted this for a seldom used room and to play files on the computer. I copied all the files onto a thumb drive. The feature on the receiver works just fine. I put the thumb drive in and it started playing. I selected random and it did the same thing. Only one problem. The next song is randomly selected by the back button. Let's say you have as many songs as I do, and one in particular play that you just love and want to hear again. Not gonna happen. If you hit "back" on either the remote or the receiver, it will randomly pick a new song. It's not a joke when this bad boy says random. All of my experiences happened within the span of 15 minutes, and I was already thinking that I'd probably send this thing back. Unfortunately, that's what I intend to do. Between the volume wonkiness, horrible remote, and not even a simple "back" repeats the song when on random... This thing would be more rarely used than the room is. Now... I don't want to end on a negative note, but if you just want to play music for cheap, don't plan on using it in a very complex manner. The job would most likely be done with this thing. You don't mind if your customers cross their arms and say the painting "speaks to them" if you have background new-age music for your art gallery. I would say you're in business with this thing. You may end up with the one I send back. That's right.

7. 12 Channel Wireless Bluetooth Power Amplifier

12 Channel Wireless Bluetooth Power Amplifier

6000 watt power The 12 Channel Pyle Stereo amplifier receiver is a must have for your acoustic sound system. 6000W power can be used for multi speakers and high quality amplified audio. The Bible has a Bluetooth-compartment. The mini professional integrated indoor house stereo receiver has a wireless music streaming feature. Today's latest devices include smart phones, iPad, iPhone, computer and hassle-free receiver pairing. The portable multi-zone audio digital amplifier box has a 3.5mm microphone in, 3 pairs of RCA audio input, and an AUX slot. There is a selectable audio input. There is a voice priority button. The home amplifier with a sound mixer device has a MIC talk-over function where the background music is minimized by pushing the button when the signal is inputted to MIC1. It's used in announcements. There are EQ controls. The professional compact rack mount home theater system receiver has a digital screen, front panel control center, and independent channel volume control center.

Brand: Pyle

👤The rear inputs are isolated to the associated channel. I did not believe the answer given by Pyle when I posted the question, because I couldn't find the answer to that question. If the answer was correct, I would purchase the amplifier and return it. I gave the tech support a bad rating because of this. The user manual doesn't answer the question. The answer is here. Yes! Each of the rear inputs is linked to the output they are associated with. This is the cheapest amplifier on the market. It can be used as a 5.1 surround sound amplifier. If you have a question, please submit it to me so I can quickly answer it.

👤I'm using it to power my massive sound system and it's outputting strong, never exceeds 100f, which is a bonus. I believe those complaining about faulty product are exceeding its input. As an engineer, most definitely recommend either way. You won't experience any trouble if you don't mix match or exceed the input. When expansion is needed, will be buying another.

👤Exactly what I was looking for. Not ready for a significant investment that comes with Control4 but moved into a house that had wall and ceiling speakers installed and an amplifier that was over 15 years old. It works perfectly when you connect 8 in-wall/ceiling speakers to this. You can control the volume for each individual speaker with the knobs. Sound is good. I connected a receiver to it so that I could use multiple sources to play through the speakers. I'm able to control what gets played in multiple zones thanks to Apple TV's airplay function. There are 8 speakers upstairs and 6 speakers downstairs that are connected to a different Apple TV and amplifier. I can play my content from my phone to both Apple TVs at the same time, so I don't have to delay. This unit is perfect at this price point. You have to manually do everything if you don't have a remote. I have to turn down the volume on the speakers in my bedroom if I want to just have content playing on them. It was a good tradeoff for the price.

👤This is my last one. It lasted for a month and a half. You can't pair or do anything with the screen that went out. It's a big deal for a small business to eat a few hundred dollars. It's past the return window by a week. The first one died in the return window. Forget about the warranty. You have to pay to have it sent back to you. It will probably happen again after you do that. Do not buy anything from the company. You have been warned.

👤The product has been broken since I first turned it on, but this review is more about the terrible customer service of the company. If you want to know more about the people who make this product, read on. I bought this receiver in November of 2020. I unboxed it in March 2021. I had a bad awaking when I hit the power button after I expired to try it out. The red light came on for a split second. The electric panel had a tripped circuit. The unit wouldn't power on no matter where I plugged it in. Although I could not overload it, I bought a replacement for it because I wondered if it was a faulty tube. It had no effect. I had a lemon. It was too late for me to return the unit to Amazon, so I contacted Pyle for the warranty work. I had to put my credit card down for the possibility of paying for parts if their warranty did not cover it, and they also required me to pay for shipping to them. I was annoyed that they didn't care that their product never worked and they were making me pay upfront. I wanted it fixed so it was cheaper than a new one. I sent it in late May. They said it would be 3-6 weeks. They charged my card for $20 in late June. They didn't give an explanation for the charge. I assumed that meant the receiver was coming back soon. I was wrong. I sent the receiver in almost 4 months ago, but I still don't have it back. When I reached out to support, they were rude and I was told that it was still in the warehouse. We are at 17 weeks with the original 6 weeks. I paid for shipping to them and they charged my card without giving me notice. There is a quality product and better customer service.

8. 2 Channel Bluetooth Power Amplifier Entertainment

2 Channel Bluetooth Power Amplifier Entertainment

2000-WATT POWER: The maximum power of the power amplifier is 2000W in bridged mode or 1000W per channel in stereo. It can be used for multi speakers that have an impedance of at least 8 ohms. Bluetooth is a cannabinoid. The professional integrated indoor stereo receiver has a wireless music streaming feature. It works with today's latest devices with hassle-free receiver pairing. The personal portable digital amplifier box has four input jacks, three speakOn output jacks, and a pair speaker terminal and binding post. Front control panel. The amplifier has a front panel control center that can show ID3 format. Left and right channel level signal indicators are also included. A built-in cooling fan. The sound amplification device has built-in cooling fans for maximum air circulation in the unit to keep it from overheating and to keep its performance to the maximum.

Brand: Pyle

👤This amplifier is the cheapest you can get. It's not going to put out 1000 watt. I tested it out with my speakers wired at 4 ohms bridge and found out the power it puts out before it starts to distort/clip. That's not per channel. If it were using each channel individually, it would put out about double what it actually does. The amplifier will put out more power than I listed, but it will sound severely. When turning it higher than the amplifier can supply, the amplifier can distort. It won't sound good. I was more disappointed than I anticipated. Sometimes when I shake the amplifier or put it in a different position, the gain becomes uncontrollable, which may be because my amplifier is faulty. I'm not sure if the previous owner dropped it or it was damaged in the shipping process. The power output may not be affected by that issue. I don't know. I'm pretty sure that you're not going to get over 100 Watts of total power out of this amplifier. This might be the least powerful amplifier you can buy. The fan is loud. It doesn't shut off until you power it off. If you don't have any music playing the fan should stay on even if you don't have any load. When the crown amplifier fan isn't pushing any speakers, it stays silent. My crown amplifier fan only turns on when it has over 1000 watt of power. The fan turns off after you let it rest. The price difference makes it so that you get what you pay for, even if it's not as good as my crown. I have a theory as to why the fan makes so much noise. It's like going to a gym and dropping the weights on the ground so people think you're working out harder than you actually are. The fans are loud. It makes me think about how inefficient this amplifier is. The fans get loud when the amplifier only puts 50RMS of power. The crown can put 50RMS for a long time and the fan will never turn on or the amplifier will get warm, compared to a real amplifier. A cheap and good amplifier has a huge difference in performance.

👤I bought this amplifier twice in a week, the first one was damaged and the second one was put out. Returned it to Amazon, bought a new one, and it was the only one to work this time. I am not the first person to be ripped off on a re-packaged broken amplifier, and probably won't be the last. boo The person is named Pyle.

👤I bought this unit for the case, because it is so easy to retrofit, and because it is over the price of this amplifier. The dual-mono design has a power supply unit in the center with a 33/33 toroidal transformer on either side. The fans are noisy. The banshee would be silent if you said "howl like a banshee" in comparison to this amplifier. The design of this amplifier is a single 2SC5198/2SA1941 pair for each amplifier and under the worst conditions, it can generate as much heat as a 5 watt bulb. A nice sounding 70w/ch amplifier. I put it on my test bench with an 8ohm dummy load and got 70w/ch. Quite an achievement. With a small power supply, the bridge mode was not as good as it could have been. How does it sound? It's pretty much like any other slow A/B solid state amplifier. It does not turn into a memorable performance with any music. It's perfect for background music. A lot of low end equipment uses the transistor pair from Toshiba. The bad. I didn't intend to use this amplifier for anything other than a parts bin. This amplifier is worth three times the selling price, but it is hampered by poor build quality, so be aware. Despite being mounted on their side, the Amp modules bowed despite being of low grade single layer construction. The power supply board does not fare as well as the other boards. It is clear that it is better quality than the Amp boards. The rear input/output board is connected to the front panel so the amplifier modules have only power, speaker and pre-in leads. It's perfect for a project. One thing left. When it's too late, the meter lights are adjusted to light. The peak output before distortion rears is ugly. The "vu" meter lights are distortion city. I think they're not calibrate for the bottom end amplifier since this is a different model. It's all done. I posted a photo of the internals for the people who were interested. Hope this helps you.

9. Channel Wireless Bluetooth Amplifier Microphone

Channel Wireless Bluetooth Amplifier Microphone

The upgraded version of thePD3000BA is called thePD3000BT. The Pyle 4 Channel Pre amplifier is 3000 watt. It gives 3000W peak power to be used for multi speakers with 2-8 ohms impedance, which will allow you to enjoy high quality audio. Bluetooth is a pharmaceutical company. The professional integrated indoor house stereo receiver has a wireless music streaming feature. It works with today's latest devices, including laptops, tablets, and phones. There are EQ controls. The speaker sound amplification device has buttons for the audio sources, the audio source selection, and the master volume adjustments. It has blue illuminated buttons and knobs. There is a display meter. The amplifier has a built in digital fluorescent display meter which shows all the functions and input used. The package includes remote control for distant audio adjustments.

Brand: Pyle

👤I bought a 250 dollar Sony because I didn't have enough money to replace my Carver amplifier and pre amplifier. I bought the Pyle 3000 because it was a great surprise for the money and the sound was the same as my old Carver at a tenth of the price.

👤I would give zero stars if I could. The amplifier is cheap and garbage. It worked for a couple of weeks. We had someone look at it and change our iPad to see if it was the problem. It was only 32 days old and Amazon wouldn't take it back. The manufacturer wants us to pay for shipping to have it shipped back and also wants to charge us for any parts to fix it. Don't waste your money.

👤Junk. I opened the box and found something loose inside. Nothing was put in. I have no idea where the two screws came from, they came from a blown fuse. There are buttons stuck on the remote control. The sound quality is not what I was expecting. The CD door gets caught when you close it.

👤I bought this amplifier a few weeks ago. I'm not impressed with the sound quality. I had a party with friends and the sound was distorted with noise. I had to stop it. It's not worth buying at under $200.

👤I received my new computer yesterday and started working on it. The unit is packed in a single box. It has a 3000 watt Home Theater amplifier receiver with wireless blue tooth streaming, a pro audio stereo with AM/FM and CD/DVD player, and a mp player. I connected the Bose speakers to it immediately after taking it out of the box. I found several stations that sounded good. Everything is working out of the box. James OKelly is from Concord, NC.

👤I'm amazed by the sound. I used ceiling speakers for a restaurant and they worked great. A good sound for what was needed. If you're new to this type of purchase, you don't have to worry. You will get everything you need for just $179 for the set of 8 speakers. If you have the speakers that can handle it all, you shouldn't turn the volume all the way up.

👤Where to start? If you own a tizen tv, you will know that this soley is not easy to pair. It took almost 2 hours to pair it to my tv, I went to call customer support, but they don't have a phone number. I tried their live chat but it was only for sales reps and not support tech, so I was sent to support tech via email, but by the time I got the tv to connect to the blue tooth device, I already had it. The next topic is now on. The instruction manual doesn't give much information about it's bluetooth. It doesn't have a way to pair it manually with a pre programmed pin code. It doesn't have a specific channel for bluetooth, so if I want to listen to the radio, I have to push the button on the receiver to turn it off, which brings me to my next topic...the remote of all things the remote. The remote shown in the pictures is not the one I received. The cheap remote feels cheap and the buttons stick when pressed to protect the pcb. The volume and tuning buttons are small and hard to find unless held under the light and the remote is black with blue around the buttons with white text. If you have decorations on your living room table or tv stand that are remotely close to the front of the receiver, it's a pain to have the remote sensor blocked. I would first like to say that sound quality is the next topic of my post. I expected less for it's price, but it sounds really good and it drives all 4 speakers. The amplifier. I can set the volume to 10 and it's loud enough to hear a pin drop when I'm watching. There is a slight static when nothing is playing, but you won't notice it happening. The digital eq visualizer display is shotty and if the volume is low it doesn't light up or display on the screen like it's got anything going on, but it could be better. The main unit power is only on the receiver via a push button, not on the remote, which is acceptable. I like to turn off my systems when I'm not using them at night, but I don't think you would expect the entire unit to power down in a lit room. The dvd player is a nice feature but pointless in a home with multiple game systems and computers, and even if you have a smart tv that has netflix prime video, and such not really needed, it holds no use for setting up the audio outputs for the receiver. The on unit display is difficult to navigate and the buttons are hard to press. If you're looking for something with ease of use, don't buy this unit.

10. Wireless Microphone Power Amplifier System

Wireless Microphone Power Amplifier System

The phone is wireless. The dual channel stereo amplifier is a must have for karaoke and home theater sound systems. You can use 200W power and have 2 sets of speakers for high quality amplified audio. A wireless microphone. The personal digital amplifier box has a 3.5mm AUX in jack, 2 audio inputs, a microphone, and a video input. Bluetooth is a cannabinoid. The sound amplification device has a wireless music streamer. Works with today's latest devices including smart phones, tablets, iPhone and computer. There are EQ controls. The buttons for mode controls are responsive. The mic echo, balance, bass, treble, master volume, input source and the unique folder/track are all controlled by the knob. There is a display meter. A built-in digital blue screen shows the track and folder name on the compact and integrated indoor AV receiver. The package also includes an antenna and remote control.

Brand: Pyle

👤I use this product for my concession stand. The sound quality and ability to talk on it was a plus for every part of my installation. I highly recommend this product because it hit every item at the highest rating.

👤I returned the item because it smelled like smoke after I turned it on a second time. The connection was bad. Volume control is bad. It sounded not good. There was a hole in it. I usually don't return items I keep them as long as they work correctly, and then I just order what I want.

👤I use an old set of Pioneer House speakers that are 150 watt each powers, and they are very loud for home or garage, even louder than I thought. The radio is good. I didn't know we had an antenna.

👤This was the perfect way to replace the head unit on the console stereo. Installation of a face plate with a face-up-hang-down was easy because of the small dimensions and lip on the top of the face plate. I connected it to a pair of Boston speakers and the 200 Watts is more than I need.

👤The blue tooth picks up the sound of the receiver. The mic works well.

👤The old amplifier was replaced by this unit. The clarity is amazing. It is very easy to use. A good value for money.

👤It was used for a powerlifting event. It was great. The sound was great and I loved the remote.

👤I returned it because it didn't meet my expectations. You received it back. I was not given back my money. I did not get a refund in my bank account. Please tell me what to do.

11. AxcessAbles Equipment Compatible American Recording

AxcessAbles Equipment Compatible American Recording

The cabinet case has Locking Wheels for the computer server, home theater rackmount gear, and audiovisual equipment. It is compatible with American and European rackmount standards. There are two packs of 5mm and 6mm screws. The front and back design is open. Vented- Side Panels are used for protection. Side panels can be left off. There are no weight bearing panels. There are front and rear rack rails. The coat is textured and black. Equipment can be held up to 18 inches deep. Caster Wheels for Multi-Surface are Sturdy. 2 wheels with locks. A blank panel is included. The dimensions are 18” x 20” x27.5” with wheels. The shipping weight was 39.7lb. The weight capacity is over 400 lbs. Load capacity can be increased by removing wheels. It's easy to assembly. This equipment rack is ideal for storing and organizing equipment. It's compatible with all of the AxcessAbles drawers, trays and rack accessories.

Brand: Axa Axcessables

👤I thought it was just stamped metal that bolts together. It works well. It is the right size with all the threaded holes. There are rolling wheels that lock. I put a picture of it in my house. Extra space is always nice as we always upgrade things. Would recommend this cabinet to everyone. It is the cheapest cabinet I could find, and it works perfectly. I can't think of anything to make it better.

👤The rack is nice. It's not a good rack. The rails are punched and tapped. The metal is thin so I stripped out two holes easily. It looks great, but it's not very sturdy. This is a sub-$100 rack and not a $100 rack. I would not buy it again. I will keep it and make it work because it fits where I need it. I was disappointed that I had to move the rack down a hole in order to install a 4U server case after doing some research. The gap at the top is too small for a 1U cover. Its going to work. Over time, I hope to get my money worth. I give it a 5-star rating but wish the metal was a little thicker. I would have preferred the 10-32 screws. What can you say about China?

👤It went well. I read reviews about how to remove screws. Ignore them. These are plastic rack screws and they hold the whole thing together. Don't tighten the screws and then remove them at once. Put the screws in tight after you insert the new piece. Use a good screw driver and tighten them a couple of turns. Look at the arrow stickers that show which side is USA and which side is euro for all the corners. I have both sides set up with USA rack sizes.

👤Left seller feedback. Be careful with this product. The threads aren't manufactured right. They do not allow you to tighten the sides. There are holes in the side rails to mount your gear. 2 of them are standard size for audio gear. The hole is larger. Without threading, the standard 19" rack screws will slip right into them. They put all the screws in the holes and then have 2 more bags in the box. The instruction sheet is really bad. The rack is nice for the size, but lacks a purpose of holding your gear secure. I have a better one, the one that costs a bit more. This is a cheaper brand knock off. I don't recommend this product, but I might have received a bad unit and others are good. Purchase at your own risk.

👤I wanted a server rack for a long time, but instead of buying one I wanted to see if I could find a rack that musicians use. I found a rack. It was easy to put together. The ability to lock the wheels in place is great. I'm very happy with my purchase and I'm looking forward to adding more hardware.


What is the best product for home theater audio rack?

Home theater audio rack products from Pyle. In this article about home theater audio rack you can see why people choose the product. [brand2] and [brand3] are also good brands to look for when you are finding home theater audio rack.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to