The stand is made from sturdy particleboard and MDF with metal accents. Overall is 15.75" D x 63" W x 20.5" H, Top Open Shelves are 15.75" D x 16" W x 5" H, and Middle Open Shelves are 13.8" D x 46" W x 5.6" H. The weight limits are as follows: Top open shelves 30 lbs., Middle open shelves 15-20 lbs. The cabinet has a top shelf of 10 lbs. and a lower shelf of 15 lbs. The Carson End Table, Coffee Table and Audio Stand are pieces that can be used in your living room, family room or basement. The open shelves give you plenty of space to keep your electronics in order. The open shelves and closed cabinets are used to stack your video games and DVD's.
👤I have no complaints about this tv stand. It took 2 hours to install apox.
👤The quality is cheap. It was too good to be true at the price point. You need two people to do the assembly, it will take an hour. I should have stopped and packed this up. I tried to make it work. The fake wood that was attached to the stand dissolved and the leg couldn't be screwed in. I did not put it too tight for that to happen. We decided to use it without the legs and have it lay on the floor. My puppy decided to have a field day with the corner of the piece. I was horrified at how easy it was for the strips to come off. If my puppy tried to chew the corner, it would cause a lot of damage to my tv stand. The piece came undone with the smallest of efforts. The door fell off after a month. If you live alone with no pets or children, this may work for you. I would recommend investing in a quality piece.
👤The Altra Carson TV Stand is for TVs up to 70" I bought a TV stand and two audio stands and they look great as a set. If you want to set up the full set, you'll need a long empty wall. The items can't be purchased in a set with a 70" TV stand. I received the audio stands first. I put them together before I got the TV stand. It took about two hours to put together the two stands. The doors were the most challenging part of the project as they had to be aligned correctly so they wouldn't scratch against the top and bottom when they open and close. The stand is about 55" tall and has four shelves on each stand, as well as the storage behind the door. If you have less than five pounds that is not breakable, I think it would be safe to put it on the stand. The storage area behind the door is very large, and I was able to fit about 55 discs and 100 CDs in it. It makes sense that the TV stand is more time consuming than the audio stand because it has many more parts. The box is 98 pounds and it is strongly recommended to have someone help you move it. You will need a lot of floor space to assemble the TV stand. The door hinges were the most difficult part of the directions, they were very straightforward. I don't think I could have assembled the doors without a drill, even though the instructions don't mention one. Without a drill, you would need a second person to hold the door in place. The TV stand has less room than the audio stand, and is more appropriate for remotes, controllers, and manuals than media. There is a wide opening for cords in the back of the TV stand, but no real cord management system. I used cable ties and mounts to organize my cords. I have a 65" TV that is about an inch away from the edges on each side, so a 70" TV would be the largest size one could have without having the TV extend beyond the edges of the stand. The TV stand and two audio stands look the same as the bottom level of the audio stand, when put together. If the top of the TV stand were black like the 50" stand, the shelves of the audio stand would be black, and the center section of the top would be black. This unit is very sturdy and looks great.
The wireless cannabis connection is powerful. The speaker is portable and can be used on your phone, PC, iPad, or Tablet with a range of 30 feet. A fan system that requires minimal noise is designed for cooling cabinets. A multi-speed controller is used to set the fan's speed. A modern brushed black finish is contained in the frame. The included Turbo Adapter increases performance by 25%. The dimensions are 4.5 x 4.5 x 1.3 in. Airflow: 26 CFM, noise: 17 dBA, and Bearings: dual ball. The dimensions are 4.5 x 4.5 x 1.3 in. Airflow: 26 CFM, noise: 17 dBA, and Bearings: dual ball.
👤The first 2 fans were noisy and one broke, but my experience with these fans ended well. This was from a known manufacturing run. The company was quick to correct the problem. The replacement fans are still going strong four months later after being installed. This business wants long-term customers and they have me now. I wrote a letter to AC Infinity and requested a refund for two products I purchased in May 2016 and installed into a media- computer cabinet in June. A small netbox PC is connected to the power of the cabinet. ATT gizmo boxes, a couple of smaller ones, and a couple of larger ones. The cabinet has a blocked internet signeal, but the bridge and ATT router are on top of it. The AC Infinity AirPLATE S3 was still working in August but started making a loud rattling noise about a month ago. I just couldn't get around to fixing these vacations. I checked the bolts on the frames and pulled them out of their mounts. The unit that I reinstalled after applying double-sided tape on the mount frame was still loud even though I tried to stop it. The dead one doesn't respond regardless of which power source it's plugged into, and I have to fiddle with the H-M-L-O switch. This isn't a high-end product, but it should last for a while. Can you please give me back my money? I am so sorry to hear that Airplate S3 is malfunctioning. I apologize for that. I will get to the bottom of this asap and have it tested. I will make a note to the Quality Assurance Department to make sure this doesn't happen again. The replacement will leave our facilities via the Uninterruptible Power Supply at the end of the day. The number is 888-609- I am sending you a pre-paid return label with this email to get this product back and have it investigated by our Quality Control department. All shipping charges are covered by AC Infinity. The replacement that will be leaving our facility will be able to resolve the issues that you were talking about. Thank you for allowing us to address this matter. I apologize again for this happening. I will be more than happy to help if you have any questions. Have a great day, thank you! The above letter was received promptly and was completely correct. I received the replacements within 2 days and have not had a problem with them. I highly recommend doing business with them. The products I bought were a good value and the service was excellent. The true measure of a good business is how they deal with adversity, and AC Infinity gave a 'clinic' on how to turn around a bad customer relations situation!
👤My media cabinet has two shelves and sliding glass doors. It looks great, but not designed to house electronics equipment. I have a box with a video bridge, Panamax power conditioner, Marantz AVR, PS4 and an audio amplifier. I usually keep the doors open, but recently my box needed to be replaced, and I suspect it was due to heat. I decided that 4 of the S1 fans would have two intakes on the bottom and two exhausts on the top, and that they would provide adequate air flow. The pros said it was well packaged. Each fan had a power plug, instruction book, fan template, and accessories in its individual box. Customer service is even better. I asked customer service questions before I bought the fans. Since I heard back from Andrew, we have been email back and forth 12 times, and he has been patient, helpful, and accommodating every step of the way. It is clear that AC Infinity cares about its customers and their products. Fans can be daisy chained, with up to 6 fans off of the wall plug or 4 from just the internet. Fans have their own speed controls, but if they are chained they will all sync to a "master" speed controller. The fans move a lot of air. Cons. The fans are loud when running off the power plug. I can't stand having them on high. Since I can't run them on high, I keep them on medium, which means that I don't get the most effective cooling. I highly recommend these fans. They are made to last and have topnotch customer service. I put the airplate s6 cooler on the top of my Marantz receiver, and now with the S1 fans set to medium speed, everything stays cool and you can barely hear the fans.
The dimensions are: 17 x 6.1 x 1.3 in. The total airflow is 156 CFM and the total noise is 21 dBA. A blower system that requires minimal noise is designed for cooling cabinets. When mounting space is limited or a smaller footprint is desired, a low-profile aluminum frame is ideal. A multi-speed controller is used to set the fan's speed. The included Turbo Adapter increases performance by 25%. The dimensions are 5.8 x 2.0 x 4.7 in.
👤This fan is of the highest quality. I am very pleased with it. I bought this to help cool the PS4 that's in my entertainment cabinet. They stuck a floor fan in front of the PS4 to keep it cool. I was going to build a cabinet fan, but I saw this one for $30. I couldn't get a decent cooling system together for 30 bucks. I was skeptical about the price until I got it. Wow. It's packaged like an egg. I've seen this side of an Apple device. There is a The construction of the fan looks great. The plastic version is rectangular, but the faux brushed aluminum version is very convincing. It has more hardware than you need. Matching wood or machine screws. I used a Dremel to cut out the cutout from the clear plastic template. The instructions were in perfect English. It comes on with the PS4 because it's powered by ausb port. It has a wall wart to power it as well. You can tuck the switch away on the cord if you want, because it is placed on the cord. Being a media cabinet fan, it is whisper quiet. It is acceptable at the highest setting, but not the quietest parts of a movie. It moves a lot of hot air out of the setting where I have it. If I could, I would give it 6 stars.
👤I bought a fan to install in my tv stand. After a while, I was concerned that the heat would affect the long term on the system of my ps4 pro. I bought a thermostat and controller from the same company. I opened the box. The build quality of the fan and thermostat fan control was very good. The fan Grill is made of aluminum. It was easy to install. It comes with a template that you cut out. My fan is above my ps4 pro and rear exit exhaust. I was getting a reading of 105 in my tv stand after testing the tempature with no fan. It stays at 80 f with the fan control and fan operating. I'm going to look into the Aircom T8 as well. If you're looking for a 120mm fan, this style is for you. Buy from this company. Great product. Excellent quality. I was very impressed with the quality of the product.
👤I need a cooling fan for a custom cabinet that I built. I was concerned that cutting the hole into the cabinet would ruin the finish. I ordered the AC Airplate S2 which fit best in the cabinet design. These products are first class. The boxing reminded me of when I bought my first Apple product, which was well packaged, insulated and a custom look that made me happy. The instructions were clear and complete when opened. The template for the cut-out was clear plastic. This isn't a dotted line, cut this out of the instructions template, but a separate plastic template for the cut out hole and face template for the Airplate S2 which made it easy to mark the required cut out hole and place the face template exactly where I wanted it. First class engineering, thinking with the customer. The Airplate S2 fan and thermal switch worked perfectly after installation. 3 additional fans can be added to the system and daisy chained to the original wiring using the engineering of this product. If they are any indication of how AC Infinity designs their products, they should be recommended as well.
Each unit has a dimensions of 6.3 x 6.3 x 1.3 in. A dual fan system that requires minimal noise is designed for cooling cabinets. The programming adjusts cooling power when temperatures change. There is a display with an alarm system, display lock, six fan speeds, two buffer options, and memory. Two fan units with controller, containing aluminum frames with a white finish. Each unit has a dimensions of 6.3 x 6.3 x 1.3 in.
👤I bought a new media cabinet to clean up the look of my audio visual gear and I noticed that my Marantz receiver was getting very hot. I used a laser to measure the temperature inside the cabinet. This is very bad for your A/V receiver. The first component to go out due to over heating is the HDMI circuit board on the top of the A/V Receivers. I bought this receiver a few months ago because my old one stopped working. I had an issue with a Yamaha receiver. I had two identical Marantz receivers, one in a cabinet with the back open and the other on an open shelf. The Marantz in the cabinet had a bad HDMI port. I did a lot of research after I had some heat issues, reading reviews and watching videos on the internet. I decided that the AC Infinity line was the most cost effective option for me. I installed an Airplane T8 system and it stays around 70 degrees. My home's ambient temperature is between 72-75 degrees all year long. The T8 system has fans with grills and a controller. You can pick one of four temperature settings, but this option gives you much more control. This is the only white version that is sold. If you want to get the best bang for your buck, you should buy the black version of the kit and then purchase 2 white grills and a white controller for an additional $36. The Aircom T8 unit that sets on top of the receiver was the best option for cooling as it provided the best cooling option. I ordered another T8 system in black because I liked it so much.
👤I bought these for my closet, but they may have been a better option than the ducts. I asked AC Infinity if they had anything to help the fans between the dry wall and they said they didn't, so I bought a couple aluminum square pipes and made the fans more efficient. The piping helped but I wish the sales associate would have helped me more and suggested other products. I don't want to repair the holes in my wall to make room for the other fans. The closet is kept at 78, but the fans aren't quiet. I have 5 fans in my PC that sit right next to me, and I don't hear that at all. I hear the AC fans running across the room.
👤Installation was easy thanks to the plastic templates. The system runs quietly and keeps my closet cool. I have two fans that pull cool air in to the closet near the floor and the other pull hot air out of the ceiling. The portable AC unit that I used to use to cool the room has been turned off for the past three months. It is certainly worth the price. I would like to have seen a couple items. 1. The probe could be plugged into the front. This setup works well for cabinets where you want the display on the outside, but I wanted the display on the inside of the room. I had to drill a separate hole to run the probe wire through since the probe connects to the rear of the unit. 2. There was no mounting hardware for the probe. Either you need a separate clip or let the probe hang/lay loose. 3. It could be possible for each fan to be independently controlled. I'm not sure if there's a different model that supports this or if it requires separate controllers.
The dimensions are 23.5” H x 15.75” D x 70” L. The top surface supports up to 200 Ibs. The shelves can support up to 30 Ibs. Each. There are 3 shelves for organization. 6 cord management ports keep cables tidy. Ships are ready to assemble with step-by-step instructions.
👤The tv stand was perfect. It was heavy. It took all day to build, but I love it. I have a 65" tv that is mounted on a stand. All of my components can be found on the shelves below. The espresso color works well with our furniture. I would buy again.
👤I bought some extra wood glue before I started because of the complaints about running out of the glue before the assembly was done. It was a good thing that I did because I would have run out. The assembly was not that bad because I consider myself handy. It took over an hour and a half to finish. The stickers that are designed to go over the screws to hide them look great and would conceal them nicely if they stuck, but others may dislike them. I threw them out, and I still think it looks good. It's dark in the shelves and the screws are hard to see. It's a nice entertainment center and it's cheap. It looks nice in my living room.
👤I don't normally write reviews but this is a great product and it's cheap. We couldn't find a tv table that was less than $700 for our 64" tv table. This wood is very solid and looks great. The instructions are easy to follow and they include everything you need to put it together. My boyfriend put it together. It took him under an hour and a half to do it. It looks great in our living room.
👤This is an updated review. This product is very popular. The bottom front kick-PLATE did not come back in place. I would return the packaging immediately if I hadn't removed it. I tried to take a photo but the material is dark and not clear about the effects of manufacturing. I hope that customers are aware that this is a defense unit. I was a retired construction worker who followed the instructions exactly until the unit was complete. The holes are large enough for the dowels supplied. I had to use wood putty instead of glue to make the holes smaller. The metal pins didn't line up with 80% of the holes they were drilled for. I had to reverse the instructions and put the top on before installing the back. There are gaps in the back. It took me an entire day to get this unit assembled and I have personally put hundreds of entertainment and furniture pieces together. If I could have gotten the pieces back in the shabby box it was shipped in, I would have stopped assembling it and sent it back to the seller.
👤I don't know why there aren't more reviews. I like it. It took a while to set up. Between my husband and I. It wasn't hard at all. It was idiot-proof. The instructions are clear and everything is numbered. All of the pieces are of the highest quality. And the fireplace! I have never seen a piece of furniture packaged so well. Nothing was damaged. It's very thoughtful to include extra hardware in case some go missing. The basement is already 5 degrees warmer than it was when the fireplace was running, and we only had it running for 5 minutes. I can't wait to slap a giant flat screen on top of it. It is huge. All of your TVs will look great on this thing. The price and value of this item is exceptional.
Can be powered by an Outlet or ausb wall adapter. A fan system that requires minimal noise is designed for cooling cabinets. The programming adjusts cooling power when temperatures change. There is a display with an alarm system, display lock, six fan speeds, two buffer options, and memory. A brushed black finish is on the aluminum frames of the fan and controller. The dimensions are: 17 x 6.1 x 1.3 in. Airflow: 156 CFM, noise: 21 dBA, and Bearings: dual ball.
👤A 7ft audio-video equipment rack holding amplifier and networking equipment was purchased to exhaust heat building up in a 5ft x 5ft x 10ft closet. The 3-fan system is 19" wide. We built a housing for it and mounted it in the center of the closet door, because it wouldn't fit between the wall studs. We used a cold air return vent in the room. The 156 cfm specification is a perfect match for the room's size, as the closet is around 200 square feet. We're able to keep a safe temperature while being cost-effective and quiet by using the hot air in the adjacent room.
👤I have been using these fans and controllers for about 5 months, and they have performed well. I'm happy with the setup. I bought these to help cool my computer, which is located in a desk with a built in computer cabinet. The desk design doesn't allow for air flow to the computer, and this setup was used in combination with a couple of other computer and desk modifications. The packaging made my first impression of the product. The box for the fans and controller was shipped within another box with padding so that it wouldn't disrupt the transport of the products. After opening the package, the products are neatly organized and include additional packing material that is securely placed so they can not shift with handling. The brushed metal finish is amazing. The installation was easy, the fan assembly and digital control unit have plastic templates included, which make it easier to drill and cut. There are wood screws and bolt and nut fasteners to use, depending on the method of installation. The wiring for my installation was long, but it allowed for different mounting configurations. I only needed command hooks to hold the wiring in place to clean up the interior appearance. In the "Smart" mode, I leave my unit on 24/7. The backlight can be set to turn off after a few seconds, or it can be on all the time. The fans are quiet and can run full speed, they aren't noticeable. This is a set that can be used to make a product.
👤The product is of good quality. The specifications are overstated. Each fan moves 52 CFM per second when a three fan unit moves 156 CFM. The fan would move a 10 foot column of air every second at a cross section of 2 inch. The movement is less than a foot per second. The fans are overpriced. It is shocking that no one is catching this false advertisement and that Amazon allows the manufacturer to sell the product.
👤After searching the internet for a solution to make my own fan array for my office networking gear, I hid it in a nice little cabinet which was getting way too hot. I found this T9 setup and I was happy. It is a nicely built product that is not cheap. It was easy to install and the guides for cutting out were spot on. There are no problems with the power and wiring. The sticker mount for the temperature probe is useful, but I am still deciding on where to trunk all the wiring. It works very well on auto/smart and at the one bar speed level it is whisper quiet and you can't notice it. I mounted two T9's as I plan to put a UPS in the other side, but just waiting for the sound proof. When I turned the power off and back on, it kept temperature settings and mode. Only one quality disappointment. (). The T9 fan array comes with four wood screws, but in my T9 boxes for the fan controller unit they were missing. The nuts and bolts were fine, but the inside of the cabinet looks a little ugly. It is a great product that does its job.
The dimensions are 5.8 x 2.0 x 4.7 in. A dual fan system that requires minimal noise is designed for cooling cabinets. An on-board processor provides a digital read-out of the cabinet's temperatures. The programming includes thermostat control, fan speed control, and energy saving mode. Two fan units with controller, containing aluminum frames with a brushed black finish. Each unit has a dimensions of 6.3 x 6.3 x 1.3 in.
👤The hardest part was cutting the holes. The templates for cutting are perfect. I tried every tool in the garage until I found the easiest, a rotoZIP. The fad tool from the 90's had to be used 5 times. It's more than payed for itself every time I use it. I remembered the tool after a long time. It was easy to cut the holes after that. The holes for the actual fans were cut slightly larger than the template to prevent noise. I traced the line on the template. It is easy to wire. I bought a fan system. The fans are one way and you have to disassemble one of them. I checked the air flow before I did that because it was already set up as an intake and exhaust. It works like a champ now that it's in.
👤The fans help keep the cabinet cool. I have a second set of cabinets in the works. The fan may cycle around your set temp too frequently in "Smart" mode. The fans kick on and off when the temp is between 78 and 80F, because they aren't silent and I set my controller to 80F. When the fans are on, the temp is usually high enough to keep them running, but when they're not, there's just enough heat to make the fans cycle constantly. If you're not watching TV in the living room, this is annoying. The solution is to stick with it. The fans come on at 80F and then turn off at 76F or 78F depending on how you set the interval, so they don't cycle as frequently. This is the best setting to use if you're sensitive to the noise of the fans.
👤My attempts at installation were not very good, I marred the surface around the control plate until I thought to tape off and the surrounding area to avoid such nicks. I don't think that's a problem with the product, just the installation, it's just the noise that the lowest speed fan makes, if it clicks on during a movie, it's something that can bother you if you're into the movie. Was hoping for better. The display is too bright on its dimmer setting to stay on full-time, so it mostly stays off unless I change it. I would have liked to see a dimme that was suitable for a home theatre setup. Minor complaints aside, I'm keeping the temps down where I want them, and can put big heat-producers in cabinets that made me nervous previously, so it does its job well.
👤I put this setup inside my desk cabinet so I could keep my two Synology NAS drives cool. The kit is very clean and well made. The DOA fan was replaced via Amazon without a problem. I'm really impressed with the 15 degree reduction in the cabinet's temperature. The slatted front of my cabinet allows for air to flow in. You can change the direction of the fan by flipping it around and reinstalling it. The only complaint I have about this product is that they should include an interior plate that mounts on the inside of the cabinet so that it looks just as clean as the outside.
There is a pierced glass entertainment stand. A multi-purpose 5-tier glass cabinet can be used as audio video tower, media stand, stereo cabinet and gaming console stand. It's ideal to store cable boxes, DVD players, streaming devices, home theater receivers, gaming consoles, hifi stereo equipment, speakers and other components. Strong and courteous audio stand. The top shelf has a capacity of 88 lbs and the rest has 33 lbs. Glass shelves and columns are scratch resistant and easy to coordinate with. Audio tower has an open architecture that keeps components cool. AudioRACK DIMENSIONS: There is plenty of space for all your audio and video components on each shelf. There is a gap between the bottom shelves and the top rack for larger stereo or home theater equipment. It is easy to exaggerate. The entertainment center has step-by-step instructions for easy assembly. Adding safety to your family is accomplished by the use of Beveled edges and tempered glass. High quality products will last a lifetime because of their rigid quality control standards. HEIGHT COMBINATION: Stereo cabinet shelves have a variety of height combinations according to your component height needs, thanks to the shelf segments that are interchangeable. The stand can fit into corners. HEIGHT COMBINATION: Stereo cabinet shelves have a variety of height combinations according to your component height needs, thanks to the shelf segments that are interchangeable. The stand can fit into corners.
👤The shelves are pretty thin. Four metal rods are screwed into the top shelf. The legs are very thin and lightweight. The tube holders are made of plastic discs with a chrome finish and a hole in the center for the rod. But... It was well packed and delivered intact. 25 min start to finish and it assembled well. The glass is the heaviest part. I didn't care for the feet. I was hoping for more robust feet so that I could place spiked feet to separate the equipment. I might do a mod in the future to allow me to do that. It looks nice and is much more expensive than it was. You get what you pay for and at 125 bucks for two, that's not bad. Not bad at all! The wife is happy.
👤It was very easy to put together. I'm not sure what I was expecting, but for the price, maybe not 4 long skinny bars running in the center of a cheap metal song. It feels more sturdy once it's put together. I thought it would feel better during assembly. I would have returned it and not put expensive stereo equipment on it. The glass is nice. As anyone with these types of things in their homes knows, they need to be wiped down and dusted frequently. Dust and fingerprints. That comes with the territory. If ypu needs shelving for stereo equipment or small eggs, this is the one for you. I suggest spending a bit more money and getting something that is a little bit stronger.
👤5 tier audio shelf. It is easy to assemble. There were no broken shelves. Before you start construction, decide where you want the biggest shelf. The plastic pieces look cheap, but they are half the price of other Chinese made glass tier systems. This lives on a dirt floor. You will need to move the stand eventually. The metal caps on the ends of the feet will destroy the hardwood floors. Purchase 4 floor protectors.
👤The item had two plastic nut retainers. These items are a poor design and are used at the end of the assembly. The plastic nut retainers are supposed to hold everything together. I think they will fail in the future because of the constant tension on them and the fact that it is a safety hazard.
👤There was a bad threaded screw on the final leg. The nut wouldn't tighten. I will contact the seller to see if they will send me a replacement rod that has good threads. I can send the whole thing back, but I have to take it apart. If you get a set that doesn't have a defect, you are fine, but I didn't.
👤I got this for a stereo rack because the cabinets were expensive. It makes my components look like chrome and black glass. You can see every speck of dust, but it takes a quick wipe with a lint free cloth.
👤This was the exact size of the stereo rack I needed. You can adjust the shelf's heights. Cool look, but no need to touch glass shelves beyond assembly. One of the disks was cracked and had an extra round disk. Well packed, and arrived with no damage. It sets off the stereo system with a modern look.
There is a storage drawer on metal slides. There are 3 open spaces for electronic components. The wire access is easy and the air flow is optimal. The top quality finish is scratch, stain and water resistant. It was designed and made in Canada. The ship is from order date. It's required. When buying online each individual's color screen resolution is not set up in the same way as the rest of the world. When the correct item is sent,Nexera is not responsible for customers' disappointment in color variation. When buying online each individual's color screen resolution is not set up in the same way as the rest of the world. When the correct item is sent,Nexera is not responsible for customers' disappointment in color variation.
👤It was easy to assemble, but it was covered in particulate from both manufacturing and packaging. Some edges of the manufactured wood are not faced with the same type of material as the fixed pieces, which is tacky. The drawer slides were being put on the sides of the drawers.
👤When I ordered it, it looked small in the picture. It has worked out well. Holds a lot of records. The wood finish is good. A lot better than I anticipated.
👤I love this product. So rustic.
👤I was looking for something similar and it looks great.
👤I wanted a simple cabinet to hold my stereo components. The package didn't have the bottom of the draw included. I contacted the parts department of nexera and was ignored, then contacted the costumer service and they said they transferred my email to the parts department. Guess what didn't get a response. Good luck if you purchase this cabinet.
The dimensions are: 16.65 D x 72 W x 26 H. Solid wood. The handcrafted is using the finest quality Pine. A Distressed Grey stain and protective NC lacquer are used to highlight the grain and uniqueness of each piece of furniture. A MULTIPURPOSE CABINET can be used as a TV stand for TV's up to 80 inches. It looks great in your living room. There is a large centrally located open area with one flip down drawer, one pull out drawer and four storage spaces with glass doors.
👤We reported a serious issue immediately after assembly, but no response from the manufacturer after a month. We had to report the issue to the seller because our return option window quickly closed and this type of design flaw can occur after unpackaging. Each piece was left in a separate part of the house to "degas" due to the high amount of harmful VOC's these units leave off. SimpliHome and other brands produce amazing designs and we still love them. I had to change my review from positive to negative. It's a shame. Solid-wood sets are made of white pine and should be avoided. Ask anyone who builds with Pine and they will tell you it's notorious for warping. When you visit your lumber yard or home center, the first thing to look out for is bowed and warped boards. Everything from the package's condition to the shipping speed was perfect. The design is beautiful and retro. The top of the unit is cupping into a "U" shape. With no real response from the seller, I'm left with making a new top myself. If I select the seller in the contact center, Amazon tells me they don't have a record of that email address. Again, we're on our own. We have a side cabinet from the same manufacturer. The top is slightly bowed upward, but not enough for us to really care. I think we got a top that came from lumber that was mishandled and stored in less than ideal conditions. The rest of the pieces are perfect. When I make cabinets, shelves or anything else with pine, I use decorative saw-cuts on both sides to release the tension. Look at our pictures. This will help us in the community if you vote for it.
👤I've purchased several pieces of furniture with this style. This is by far the most poorly designed of them all. The screws don't get enough bight to be secure because the wood has no density. The pieces are wobbly because the hardware doesn't pull tight as it's intended to. Before I put my TV on this stand, I will have to disassemble it and reassemble it using wood glue and a piece of furniture. It was delivered with one piece broken in half. I received an email that said it would be several weeks before I get the replacement parts I requested. I have reviewed this product before I get the replacement parts because they are very low quality. The forward arrows on 2 pieces were put on the wrong side so I will have to glue them together. I will not purchase another piece from Simpli Home again and my mother will not purchase a similar stand for me because of the low quality of this product.
👤I was not happy with the overall quality. It's easy to put together, but some parts are substandard. I don't mind the flimsy material used for the backing, but it's a tip that this isn't really a great piece of furniture. It won't hold much weight because it's in the drawer bottom, and it's not going to last long. They call it a door "skin" because it's made of wafer thin luan material. Really shocking. The clear tape on the doors states that the glass is "tempered glass", but it can't be removed without damaging the door. You will get to see part of the printed label when you see the inside of one of these glass doors. It was a mistake to buy this. I wish I had spent less on this product. It would have been better to buy a new piece.
The 16W high- performance motor creates a stream of powerful air while using less energy than tower fans of other brands. Please contact them if you have any questions about this desk fan. A quiet fan system is designed for cooling equipment. Protects components from overheating. There are two thermal triggering modes and four control options. Two dual-ball bearing fans with PWM-controlled motors are included. The dimensions are 11.6 x 6.3 x 1.5 in. Exhaust: top, Airflow: 140 CFM, noise: 19 decibels
👤My Denon receiver is hot. I was concerned about the heat since it lives in a TV cabinet with glass doors that I prefer to keep shut, and it was not "iron your clothes" hot, but much hotter than I was expecting. The lifespan of sophisticated electronics will be shortened by heat. I found this line of fans on Amazon and decided to give the S7 model a try. It's only 1.5in tall and 12in wide, but it has plenty of room for air in my TV cabinet. The feature of "auto on" only comes on when the temp is over 88 degrees. The fan speed can be set as well. I've been using the unit for four days now and I can see that the fan will start kicking on within 20 minutes and that the cooler air will be drawn out of the top of the S7 unit. The air coming out is very warm. The unit is very quiet and doesn't interfere with what you're watching or listening to. The electronics inside the unit are very good. Two 4.5in (120mm) fans that are extremely quiet, operate via a thermal Trigger in the auto mode, and have variable fan speeds. I only have one concern, if the 2 fan unit is enough for what I want it to do, or will I need the slightly larger unit with 3 fans? One of you engineer types might have that answer. I'm pleased with this unit so far.
👤This device is perfect. I have a Denon AVR-6300 Home Theater Receiver, which I love, but it gets hot... Let's toast some marshmallows that are really hot. The problem is the power transistors throw off a lot of heat. I was looking for a fan that could help. I saw an ad for the Aircom series of cooling fans. They have a wide range of cooling fans at reasonable prices with variable speeds and they looked nice. The S7 has two fans and exhausts straight up. It's only 1.5 feet tall and in my setup, that leaves 3 inches between the top of the Aircom and the shelf above. I sat down to watch a movie at my Bombastic levels and I used the fan on the middle speed setting, it was quiet and the air blowing out was only slightly warm, and when I felt the top of the Denon, it was only slightly warm. What a change! I told my friend to get one as well. There is a For the sake of your equipment, get this if you have components that run hot.
👤I bought the AC Infinity Aircom S7 - Top-Exhaust unit for my Yamaha TSR 7810 receiver after I reviewed their options at their website. Installation was easy. I set the unit up using "Smart Mode" after reviewing the instruction panel. I read the Instruction Manual later on. We've been experiencing 95+ degree F weather in the SF Bay lately and even though my family room is air-conditioned to 81-degrees F, the Yamaha does warm up internally up to 88-degree F. It shuts off when the temp is 84-degrees F. Since I bought the Aircom S7, I'm pretty sure that my Yamaha internal heat goes past the 88-degrees F target set by AC Infinity, since I felt the top of my cabinet warm to the touch after being on for an hour or so. Since the shelter-in-place order here, I've had my Dell laptop connected to my Yamaha and Lg 55" TV to do work, watch the news, TV shows and an assortment of movies. The Yamaha is generating a lot of internal heat when it's on for more than 15 hours a day. I'm a very satisfied customer. It's nice to have a quality fan accessory product that works well. If you use a product like the AC Infinity Aircom S7 you can prolong the life of your audio electronic component by keeping it cool. The warranty is from the date of purchase. Highly recommended.
Home theater cabinet 72 products from Ameriwood Home. In this article about home theater cabinet 72 you can see why people choose the product. Ac Infinity and Ac Infinity are also good brands to look for when you are finding home theater cabinet 72.
Ameriwood Home, Ac Infinity and Ac Infinity are some of the best brands that chosen by people for home theater cabinet 72. Find the detail in this article. Ac Infinity, Walker Edison and Ac Infinity are also brands that their products are worth to check.