The protection plan product page has terms and conditions for nationwide repair support. Limits apply. Click on the "Warranty"link to see the details of the protection plan. On the first day of coverage, tears, stains, punctures, fluids and gouges will be covered. The day after the manufacturer's warranty expires, mechanical failure coverage begins. This plan doesn't cover all damage. Structural and pre-existing damage are not covered. Repairs that are not authorized by the administrator are not covered. For a full explanation of exclusions and limitations, see the plan terms and conditions. If a covered repair can't be completed, you'll be reimbursed with an Amazon gift card for up to the amount of your original product purchase price. If a covered repair can't be completed, you'll be reimbursed with an Amazon gift card for up to the amount of your original product purchase price.
👤The email says it does not cover damages, which is a total waste of money, and the listing says it does.
👤I'm getting told that I have to wait 24 hours after I register to file a claim. I waited and said you have to wait 48 hours after you register. Really? Okay. Waited again and was told to fax the proof of purchase. I called and said that it had to be called back in 3 days due to an internal procedure. What a waste of time. I have to wait another 3 days and most likely will be told another excuse to drag on the process. I will not purchase SmartGuard again.
👤I've purchased extended warranties in the past and never had any issues with them. After looking at other customer reviews, I realized that SmartGuard is a scam. They say in their terms that they don't cover structural damage. They only cover pet stains like urine, but not other stains. They don't cover anything except pet urine or a cigarette burn. That's ridiculous. I want the warranty in case the chair falls apart in a year or two. Structural damage and manufacturer defects are likely to be the reasons for that. I've read horror stories of customers who couldn't get anyone to contact them, or that their requests were denied because of the limitations. They could not claim damage was structural or manufacturer. This is a waste of money and an awful sham, so I returned for a refund. Read the terms carefully.
👤Don't waste your money. After only six months, the chair I bought for broke and became unsafe to sit in. I have been trying to get a refund or replacement ever since. Amazon won't help and SmartGuard won't respond. SmartGuard is not used often.
👤I tried to use it, but it was canceled.
👤When I received my product, I registered it, but the website did not allow me to file a claim. When I sent them an email, they asked for information, but also said I could call. I tried to submit a claim again, but couldn't. I called the number on the website, but they couldn't find my information. I had to give them my plan ID which they never asked for. These extended warranty companies can lose your information if they jump around so much. I was able to submit a claim, which they are supposed to send me an Amazon card for, because I submitted a claim. They make it hard to submit a claim that the average person would give up and get fed up with it.
👤I bought an extended warranty for the first time ever on a Tommy Hilfiger Lafayette Mid-Century Velvet Plush Sofa, which was purchased back in the year 2019. Since I was getting a bargain, I thought there must be something wrong. The frame broke 2 years later, making it useless. When I got the sofa, I registered and filed a claim. The email said the gift card is approved for the full amount. Smart-Guard issued a gift card for the full price of the sofa instead of replacing it. They will always choose the cheapest option.
If a covered repair can't be completed, you'll be reimbursed with an Amazon gift card for up to the amount of your original product purchase price. Storage is the biggest reason why people love elevated beds and sofas, they look more elegant and are more portable. The iPrimio Bed Square Shaped Riser has a padded foam grip to prevent sliding and slipping. Their bed risers are made of heavy duty plastic that is safe to handle the weight without causing any damage to hardwood or hard surfaces. The furniture riser has a top and bottom that prevent rolling of caster wheels. This home accessory fits into raising up desks, chairs, sofas, caster wheel furniture and beds in most homes. Its strength can protect your floors and give you storage space. Other risers crack easily in spite of assurances and that has become the highest rated complaint of consumers, but IPRIMIO risers offer 100% warranty against cracking. The risers fit a broad range of furniture types, including wooden and aluminum bed frames, reclining chairs, and more.
👤The company took the time to improve upon the designs of the other risers and that's why I chose to buy these risers. There were a lot of complaints about furniture sliding off of other risers when I searched on Amazon. These hold my Flexsteel couch well. I like the rubber coated metal plate that sits down in the well where your furniture sits which helps reduce the weight. The risers are about 3 1/2 feet tall. The well that your furniture sets down into is 2 1/2 square and about 1/2 deep, which means that it will sit up three degrees higher than the floor. I hope the pictures help you make a decision. If your furniture will sit on wood or laminate flooring, they come with rubber bottoms. I didn't use them because my couch is on carpeting, so I don't have to worry about it. The quality of these risers is very good. They were a great price and made in America. What could be better? There is an update! They are still holding strong a year later. At Christmas, my taller inlaws sat on my couch. It was much easier for my father in law to get up.
👤The leather sectional I had was very expensive. You can arrange them in many ways because it has 6 seats. It was low to sit on. 10mm size European bolts are used. Replacing the legs was an expensive option. Couldn't be more pleased with these. I have carpeting so I took the floor guard off. The carpet was hugged more for a good riser floor base. My legs are in the well. You have to have nails for your legs to puncture the middle of these risers. These are highly recommended. The sectional has 6 pieces and I needed 24 risers. Sturdy, strong, and looking great.
👤I am very pleased with the product. I have a beautiful leather couch and a nice lounge chair. I lost part of my leg in an accident. I wear a Prosthetic when all is good. I sit on my couch and chair because I am 6 foot 5. They were so low to the ground that it was almost impossible to get out of a sitting position. I bought these risers from Amazon. It's much easier to transfer to a vertical position when the items are raised up by 6 inches. I am in a wheelchair and can transfer from the chair or couch. I wish I'd known about this product sooner. It has changed my life.
👤My bed legs fell and I broke them.
👤I ordered this product because my gastroenterologist recommended elevating the head of the bed because I have acid reflux which is worse at night. I read the reviews on similar products and decided on this product because I wanted a good quality product with some negative reviews. It has met my expectations, they are sturdy and there is no slippage under the mattress. Be sure to read the instructions. I have a king size bed and when I lie down on it, I can't tell the elevation. It is a 2 person job and the mattress has to be lifted. It is a very good product and I recommend it.
All Bed sizes include Twin, Queen, King and California King. You can raise your bed between 3 different sizes. All Bed sizes include Twin, Queen, King and California King. You can raise your bed between 3 different sizes. The bed riser can support up to 1200 pounds of weight. The Bed Lifters or Casters fit into the recess cup built into the top of the Bed Risers and instantly creates extra under bed storage space. Bed frame risers are great for lifting furniture and beds in a home or apartment. You can stand without bending your back with the help of the risers.
👤I received Home Intuition Heavy Duty Adjustable Bed Risers or Furniture Riser 3, 5 or 8-Inch, 4 Pack. I am using them to raise a twin bed. I can put totes under the bed. There are two stacks to make 8. The bed and the caster can't come out by accident due to the nice lip around the top that keeps the caster safe inside the square. It was easy to slide the bed against the wall once it was up on the risers. I have wooden floors in that room, but the bottom of the risers have a wide lip. The bottom of the plastic is not rough cut. The carpet probably has the lip on it. I want to add that it isn't slippery. I have to push to move it. I feel it is strong and safe. It doesn't move when I test getting in and out of the bed. I have been using it for about two weeks and I am very happy with it.
👤I used these to lift up my bed frame. I could keep things under the bed. I used to use wooden blocks, but this is better in terms of appearance and ability to move them around easily. It holds up the bed well. I have a pretty heavy metal bed frame, and it's not buckled yet. The material is light and flimsy. There is no real reinforcement underneath the three by three slot where the legs rest on the block. Extra plastic ribs. The blocks are hollow. Do not use these if you have a heavy object with narrow legs. It would be a matter of time before the legs penetrated the block. The bed frame legs are two inches. I wouldn't use these for a heavy desk.
👤This was the solution to our problem. When moving an elderly parent into assisted care, we bought a new bed. We lined the frame with ply-wood because the box springs were too high for our mother to easily get into or out of the bed. The bed was too low and hard on our mother's knees. The bed risers we ordered allowed us to experiment and find the right height. We started with the 5" riser, but it was at the limit of where we needed to be, so we switched to the 3" set. This was perfect. If our mother can rebuild her leg strength, we'll probably switch back to the 5". The point is that we have an option. ... The risers are solid and easy to switch in and out of, and they are easy to bear the bed and occupant's weight. I can see how under-bed storage could have been an added benefit for us.
👤These are worth a lot of money. I was worried that they would feel unstable since the legs are more centered, but luckily that's not the case. I'm not sure if the futon would still be stable if I put it up. I don't need that anyway. I'm happy I got these because there is so much storage space under it.
Remove your furture. Restore, Lift and Fix Stinking Sausages. Laminet's LOVESEAT Cushion Saver is a great solution to help prevent your cushions from sagging and to restore their original support. Your cushions lose their lift and support over time. Springs within your couch concentrate body weight, which can cause your cushions to droop. The cushion savers help distribute the weight evenly. The Extra Thin board is made with heavy-duty vinyl-covered wood. Laminet's new and improved version is 60 percent thicker than competing brands. The thick panels give more support. The sturdy wood is used in furniture making and does not break or fall apart. The rounded edges of the soft non-slip vinyl make it safe to sit on. No harm to the inner workings of your Love Seat. It is easy to install. Slips under seat cushion to make it more comfortable. No tools needed! The solution to the sagging LOVESEAT cushions only takes a few seconds. Simply remove your cushions, place them in the center, and enjoy your couch with new cushions. Most loveseats and standard sized LOVESEATS have their couch savers. If you fold over their panels, you can provide additional support for areas that are sagging. Keep the shape of your crotches. Improves posture while upright. The shape of your cushions can change over time due to weight distribution. Their cushion savers help support sagging cushions and keep them upright. If there is a spill below your cushions, the vinyl layer wipes it clean. Save money trust has 60 years of experience. Laminet's product development team has 60 years of experience and has developed the best cushion support. You don't need to buy a new couch with their cushion savers. You will instantly feel the difference with their cushion saving support inserts. Their inserts will give you the feel of a new couch without breaking the bank. Save money trust has 60 years of experience. Laminet's product development team has 60 years of experience and has developed the best cushion support. You don't need to buy a new couch with their cushion savers. You will instantly feel the difference with their cushion saving support inserts. Their inserts will give you the feel of a new couch without breaking the bank.
👤What the heck? Is this for children's furniture? I think it's on me to believe their pictures instead of measuring first. This is not worth anything.
👤Four years ago, my couch was a $100 thrift store special. I have arthritis in my hip and this saggy thing has been terrible for me. I read the reviews and bought 2 of them. What a difference. This couch feels new to me. It's easier to stand up from sitting because of my hip pain. You will definitely buy 2 of them.
👤It's hard for me to get up from the sagging of my 2 year old daughter, as I'm 40. The cushion support works well. I spent a lot of money on the couch, so I would buy 2 of these to make it better.
👤Have been looking for a solution to the sagging sofa cushions. It's easy to install, just lift your cushions and place the cushion support between the frame of the sofa and the cushions. The product is easy to open. Replacing the sofa, the cushions, or the fill in the cushions is a lot more expensive. It's great to find a solution to a problem. The look and feel of our sofa is better after we put in the Cushion Support. Great product!
👤Have an old chair with a sagging cushion and don't want to pay to have it restuffed. This cushion support insert was purchased. It works great! It is heavy and thick. It has a really solid feel and is covered in plastic. I noticed a change in the sagging cushion when I put it under the chair. It's a great value.
👤I'm excited to get this to fix my couch. It was pretty good when I opened it. I don't understand how it was shipped with a tight plastic around it. I'm pretty sure I'll return it.
👤I wish I'd ordered two of these supports, because one worked well to lift the cushions on my old sofa, but I think two would be better. Prompt shipping and item description.
👤I was compelled to write a review after reading so many bad reviews. This thing is great. I'm not sure what kind of couch problem other people have, but my husband's couch came from his dad. The couch is more than 10 years old. My husband plays a game. I don't like this couch because it's old and raggedy, but with money being tight these days, you should make do with what you have. The butt print problem was gone when I put this in. The box came in more towards the back for extra stiff firmness. It fit the couch perfectly. It's a good thing. I bought a 66" Awesome purchase! I'm going to buy a cute couch cover and finish redesigning our living room. It's a good thing.
👤I bought a sofa from a popular online furniture company and paid over $1300. I usually sit on the middle cushion. My sofa's frame is cheap and this product is not bad. I began to feel that the firmness was losing its strength in a few months. I read the other reviews and bought 2 to spread it out over 2.5 areas that can use the plumping. I received them and started with a single layer on the main sag. I was with the two. I have used both of them on the main cushion area and I am looking for upright sturdiness. Overall, it is not that this product works or does not, but how badly you need the firmness in your priority areas and what you are willing to accept. I have 2 pieces that are folded over to make 3 layers. It works for $150. I needed this stability so that I could sit without my back curling outward, and the sofa I bought was shabby in quality. So it works... This amount was needed. I keep them because they are my only option until I buy a better quality sofa.
The risers fit a broad range of furniture types, including wooden and aluminum bed frames, reclining chairs, and more. Recliner height raised 1.75" The weight capacity is 800 pounds. Adaptable, does not interfere with the reclining of the chair. The padded base has slip resistant and non-marking pads. Recliners with wooden legs only, Rocker Limiter along the 2-inch strip closer or away from the spring complex determines where the chair will stop when one stands up, and adjust to users comfort. The low profile matches the look and feel of the furniture. There is a bonus rocker limiter.
👤The kids bought a recliner for our mother. She is very frail. I have had both knees and a hip replaced. It was useless right off the bat. She can't move the footrest lever because of the tension on the footrest. That problem was solved by the Stander brand lever extender. It was hard for her to get up from the chair and she took a chance on the risers. The reviews almost didn't. Do not understand people who don't use all the stuff. Do not need another broken hip here. There is a It looks like it only raises recliner height by 2 and 1/2 inches, but there are other dynamics involved. I had a power drill and a power screwdriver. When trying to figure out how to attach rocker limiters, I had a brain freeze. That was the best part. The recliner stops pushing to the floor when she sits at the end of the seat, making it harder to get up. The limiters make a solid base from which to get up from. It has been easier for the investments to be made on that frail old body.
👤The product worked well for raising the height of my chair. I read the critical comments before ordering this product, and decided to order it anyway because many of the critical reviews seemed to reflect a lack of patience with either the product description or installation instructions. The product description made it clear that the product is made for recliners with wooden runners, not metal ones. The risers are made of plastic, but they seem to be of a design and strength more than adequate to support the weight of the chair and seated person, and they are close to matching the color of the runners to which they are attached. I was prepared to pre-drill holes for the four screws which secure the riser to the runner, but it was unnecessary as the self-tapping screws went in just fine with a simple screwdriver, and the placement of the screws seemed to work well. The price was fair if the product saved my back from getting into and out of my chair, I am paying for the idea and design, not the cost of the raw plastic. The instructions and illustrations for the risers were very clear, but it took me a couple hours to screw all four on, but that's just me as I'm 81. One reviewer claimed that he could do it in 15 minutes. I was happy with the result. The extra product that was supposed to stop the rocker from tipping forward was disappointing. The product consisted of two little rubbery white plastic pieces and some velcro, with vague instructions and tiny drawings that I could not figure out. I attached two of the left over bed risers on the front using long bolts and nuts.
👤If they don't work for your chair, they are non-refundable. The write-up does not indicate that they are non-refundable. I was surprised that these are rated as "Amazon Choice". I called Amazon Customer Service and they credited my account, which was nice of them. Customer Service said they would update the description if they didn't.
It's easy to get up in a recliner, chair or bed. When you stand or sit, the strain on your hips, lower back and knees is reduced. Can be used with other furniture, including tables, chairs or beds. Recliner risers will not affect the reclining function of your chair. The risers use special glue to keep them in place. It can support up to 600 lbs. Help reduce the strain on your body by flipping over when you're up and sitting down when you're down. It can support up to 600 lbs. Help reduce the strain on your body by flipping over when you're up and sitting down when you're down.
👤Set the chair on the risers. Sat down. The chair slid off the risers. A very dangerous product. The risers are made of plastic. The chair was a standard La-Z-Boy recliner.
👤These were bought to elevate the recliner. I decided to give them a try after I ordered them. My sister had a hip replacement and we got these for her recliner. We put them on the chair and they are perfect. They are strong and stable. I would definitely recommend them. We put two risers on each side of my sister's chair because it has a part that contacts the floor from to back. They seem to be perfect. I was glad that I ignored my skepticism.
👤The recliner risers made it very comfortable for me, as I am 73.5" tall and have long legs. We had to order a second set to keep the recliner from tipping over in the front. It tilts a bit toward the front now with the extra two risers in the front section of the legs, but not as much as before, and not as unnerving. The first set of these should be installed at the end of the recliner's runners rather than being set back from the ends of the runners, which was how we first installed them.
👤The seller left the girth measurement of 33.33 out of the comments, which is beyond confusing. The notch was measured as 37mm or 1.465 inch. It would have required rails to be forced down into the notch and most likely fractured plastic, making riser dangerous to use. I was able to get risers to fit the front and back rails of the chair, but it's dangerous as it makes the chair sit on a smaller base which could cause it to flip if one did not sit carefully down and never sit on the arms of the chair.
👤The risers are perfect for my recliner. The legs come with an optional strip that you can apply to make sure they don't slide back and forth or off the end. The risers can be turned over, and on the other side there are large holes that can handle furniture and bed legs. The rise is 3-plus inches. It was just right for my needs. I would buy these again for other furniture. If you have a rocker-recliner and legs that are standard width, these fit perfectly. I was looking for something that would work for this recliner, and these were the only ones that fit the bill. Problem solved.
👤It was wonderful to make chairs that were the right height. There is a We had a problem where they were placed on my chair when I leaned forward. We put 2 in front of the leg after buying a second set. The problem was solved. We used 8 to make sure my husband's chair was stable. The glue strip doesn't work very well but once set you don't need them.
👤These would have been great. My chairs legs would fit nicely in the slots. They were a perfect fit in the front of the chair. There is a problem at the back of the chair. There is a post that runs from one leg to the other in the back of the chair. The slot is placed close to the floor, which does not allow enough room for the depth of the slot. Will have to return them. They look sturdy and easy to install, so I wish they would have worked.
The power lift is a consecration. The dual motor lift chair recliner has both style and function in it. SMOOTH BROWN UPHOLSTERY: The upholstery is made of thick poly fiber and has a good feel. It has a high back, thick cushions and corner-blocked framed seat. Slow power movement. The time it takes to complete a full cycle from fully reclined to completely lifted is 1 minute. It takes 14.5 seconds to move from reclined to upright. Instructions, hardware and tools are included in the easy assembly. Instructions, hardware and tools are included in the easy assembly.
👤This is a nice chair. I bought this for my husband who has recently developed serious mobility issues and needed something comfortable and easy to get out of as our stationary furniture just wasn't working for him. It is attractive and comfortable. You can't even hear the power controls. The photo on the sales page shows it reclines, but it lifts much higher. It is very heavy and seems to be well constructed with metal reinforcement. The fabric is soft and not sticky like vinyl and it looks like leather. The color is very similar to the photos shown. If you do a search on the internet, you will find that this chair is sold at a number of different places, some of which are less expensive and some of which are way more expensive. The shipping is a lot longer such as 3-6 weeks. The chair I received from Amazon was delayed due to the weather. The freight delivery guy was excellent for such a large item. I did my homework when buying it and it is sold under the brandDarby Home Forreston Power lift recliner at Wayfair for considerably more. The shipping weight was 139 lbs. I was a little worried about how I was going to assemble this bugger on my own. When you unpack the back and wings, you don't have to worry about it because you can just cut the box down the sides and slide it out. It took about an hour, but it was well packed and the directions were clear. I went slowly. It worked great when Plugged in. One of the reasons I went with this chair was that I have purchased other small items from the same store and have been satisfied. We are very pleased so far. Hope these photos help as they don't show it reclined or in the full lift position.
👤I received this chair in the middle of October and was very excited. After THANKSGIVING, LITLE APPLE SEEDS BOUGHT TO APPEAR. I bought a bed bug bomb for the storage area in my apartment building. BenJAMIN and I left for a long time only to come back to find something. "DRUNKEN" BED BUGS were left in the janitor position. There is a A second treatment is produced weeks later. The same results were achieved with the same bed sizes. Is it possible to remove the chair from the corpse? After putting it in a bag. You need to stop using them for stuff.
👤I bought this for my 78 year old husband because he had trouble getting in and out of chairs because of double knee replacements. He was scheduled for surgery in January, which could further impede his ability to get out of the chair he spends all of his waking hours in, so after looking at many recliners and reading a lot of customer reviews, I felt this chair would be a good solution. It turned out to be perfect according to my husband's report. In resting position it sets a little higher than the regular recliner he used to have, which in his case the higher profile is comfortable to start with. The lift feature helps him on the days he is tired more than ususal. The end of the leg lift is above his ankle when he is in the full recline position. I was worried about the dimensions of the chairs I looked at. The seat is wider. I am certain that if my husband were heavier it would still be comfortable. It is quite comfortable according to him. The motor for lift and recline is very quiet when activated. The leather is very strong. It was easy to assemble in the sturdy box it was shipped in. It was delivered to our house. It was up to us to move it to the intended room because he is 78 and I am 63, but we figured it out and took our delivery. It fit through a regular door. The chair is delivered in two sections. The lower section is heavier than a regular recliner because of the motor. My guess is about 10 to 12 lbs. It was heavier. The arm cushions and the vertical side back cushions are easy to install because they are mounted on slide brackets. The two main sections are easy to slide together. The motor is plugged into the wall and the hand control is plugged in. I hope that I have given enough information for those looking for this type of chair. My husband and I are very satisfied with the chair and would recommend it.
The 8 piece risers, ranging from 3 to 8 inches in height, add a new level of comfort to your life. The risers are wide and deep enough to hold furniture legs. When combined, the three height options of up to 3 Inches, 5 Inches and 8 Inches have the greatest bedpost distance, and the bed risers can be stacked together to conserve space. The bed leg fits securely into the recess cup and is convenient to use on any bed. They can support a total of up to 1,300 lbs. and are made of heavy-duty plastic, which can stand the weight of the heaviest furniture in your home or office. If a proper fit is being delivered, make sure to use bed risers together. The risers are not suited for recliners and the furniture legs should not be thicker than 2.75" to ensure a stable base for the furniture. The risers are not suited for recliners and the furniture legs should not be thicker than 2.75" to ensure a stable base for the furniture.
👤We moved from 2200 square feet house to 1200 square feet apartment. We ran out of space to put things in. They allow the bed to fit a lot of stuff under it. We purchased 3 sets. We were able to fit 2 huge totes and tons of boxes under our bed that wasn't able to fit anywhere else, and I was able to use these to lift our pack and play. I have no fear that these will not support. These are easy to use and have two height options. I have to do a run hop to get to my bed, but these are worth every penny. We have more space to fit all of our belongings, instead of having to get a storage container. This product is very good. Please let Amazon know if you found this helpful. Thanks!
👤Only used for a couple of weeks. I sat on the foot of the bed and boom broke through. Since I ordered the risers before the bed was delivered, I was out of the 30 day return window, which probably wouldn't make a difference as their return policy states it must be unused and undamaged. I bought two sets but am hesitant to use the rest. What a waste of money. You get what you pay for.
👤The smaller risers in this box are great for raising my desk up a few inches, but I thought the box had 8 risers, which is what the product name says. Instead, it comes with four risers of a small size and four of a larger size, which makes it four risers, not eight. I have a desk with eight legs and I cannot use just one box to elevate it. The product name should be changed to make it clear that what you are getting is only four legs of a furniture item. It isn't eight risers, no matter how you spin it. There are four risers and three different size options. I have an issue with these being oddly bulky. Unless your table or bed has large legs, you're going to be left with cube feet.
👤The legs are raised under the bed by using two of these. I had read that it would help with my problem. It definitely does!
👤My daughter's dorm room was given the extra storage by these risers. The bed is stable.
👤I usually read the negative reviews first. I decided to chance it. I ordered two sets of bed risers that were rated at 1300 lbs, so I had plenty of wiggle room on the weight capacity. I was glad I ordered two sets because I had two center feet to support. I tried the smaller ones. They were too high and the 4 inch adapters were a perfect fit. When I sit down next to the bed, it hits me above the knees because it is just 24 feet off the floor. I have used them since February and they are easy to use and slide on the floor when I need to make the bed. They have a good base that holds your bed at the right height for a comfortable night's sleep.
The size is 3.3X 3.3 Inch. The internal increase is 2.75 inch. The total height is 3.9 inches. Adding storage space under beds and furniture makes cleaning underneath furniture easier. Lifts heavy bedroom, living room, and home office furniture to a better height that provides a safer advantage to the user. There is a set of four. Raises beds, couches, armchairs, desks, sofas, and other heavy stationary furniture height 3.14 inches to assist the sit to stand process and boost ergonomics.
👤The item is so pathetic that it is hard to believe. These blocks of wood have been saw cut, dried glue on the bottom and sides, and stapled to the floor. One of the four is a rhombus with a giant crack in the middle. This is not holding together. I can't take pictures due to a broken phone camera, but I know that this is highway robbery, and you can charge anything more than 4 dollars for this product. This is what I get for not making my own.
👤I wanted to raise my nightstand since it was too short. I didn't want to destroy the wood. These bed raisers are pretty good. They are a piece of wood painted white. I can't complain since I was looking for something like that. I attached some velcro to my nightstand and it worked well. The felt pads were added to protect the floors. It was pretty good.
👤I received three risers and my bed only needs them.
👤I was surprised by the quality of these and how well they worked for my platform bed frame. I was expecting ikea quality and got a lot heavier wood. I needed a small boost so I could store things under my bed but not lose the platform style and these worked perfectly for a bed frame without legs, they were easy to rest the frame on and large enough that I don't need to secure the frame further. The wood bed risers were a perfect match for all the other wood and metal room decor. Would recommend!
👤The unfinished risers were ordered by me. I painted them with a spray primer and paint combo to match my nightstand, which I needed to raise up a few inches. I used gorilla glue to glue the nightstand to the base. I put them down and let them set for 24 hours. I removed the rubber feet at the bottom of the nightstand before I glue the risers in order to create a flat surface. I was careful not to put too much pressure on the risers so that they wouldn't pop off when I turned the nightstand back over. Everything turned out perfect. It looks better now than it did when it came from RH. If you don't glue them, you will end up with a wiggle problem.
👤The above picture shows a block that holds my incomplete couch. I should've looked for the tiny riser in the description. It's only a few inches tall. I bought this item because my elderly parents can't sit on my couch because it's so low. I don't hold it against the product since the dimensions are listed. If you only need a small amount of lift under your furniture, this product is solid and I would recommend it.
👤This was bought for a bed frame. I needed to raise the bed a few inches without messing with the frame. I was going to cut some wood and screw it on. I wouldn't be able to add anything on the bottom of the bed. I bought these and they did the job. It looks very sturdy and will last a long time. I recommend buying furniture feet or protectors that will not scratch your flooring. If the furniture moves, they have a chance of sliding out, so I recommend attaching them to it. I have no issues with the mines I screwed in.
Raise your recliner by 3-4 inches for in-and-out ease. Raise your chair height to reduce strain on your back, hips and knees. Independent living. It is easy to install with non skid material. It blends nicely to make you feel comfortable in your home. Chair risers can support up to 600 lbs. Each set of 4 is 3 3/4" sq. Each set of 4 is 3 3/4" sq.
👤I have La-Z-Boy chairs with wooden bottoms that I use to raise the chair. The chair is too low for us. I bought these lifts because they raise the seating wonderfully when attached to the bottom of the chair. The chair became unbalanced because it was impossible to attach the front two risers in the correct position. You have to be able to place them exactly as they say on the instructions - two at the front of the legs and two at the back. It was difficult for me to take them off. That's a good thing. You won't have to worry about them falling off. Hope this helps.
👤I put these on the bottom of my recliner because it was too close to the ground for my big frame. I had 2 problems when I put them on, the first being that the chair wanted to tip over backwards when I sat down quickly. I had to put these back on again if I moved the chair to clean under it. I solved my problems by buying an extra 2 of these supports and putting them near the rear of my chair's foundation, and by putting the stips on the bottom of my chair so that the supports would stay. Problems are over! These supports are great for when you have a recliner that is too low to the ground or an older person that needs some help getting up.
👤We bought the riser to raise my dad's recliner. The top of the risers were wide enough for the frame of his chair. We used extra tape, bottom and one side to hold the risers in place. The way the frame is made us unable to use the risers on the front. When he pushed on the arms to get up, the risers had to be placed far back. The risers and chair are not compatible. The risers are still on the back, but we made our own risers for the front.
👤I wanted to give my small craft table more height by purchasing these risers. I attached the risers to the legs of the table. I was able to remove and replace them at will.
👤It's easy to install on an electric recliner. It was tall enough to get up out of the weak legs. Great product.
👤I own a recliner. This is a lift chair. I bought sets to make sure that when this chair is lifting me I can stand up. My mind is at ease. It works well! I used bed risers on my recliner.
👤I had to rig them to work on my husband's chair since they are wider than his legs. I thought they were higher. I was worried that they wouldn't be high enough. He had to learn to get up with his hands back on the arms or the chair tips forward because we couldn't get them far enough to the front. I'm hoping to find something that will stop it from moving so quickly. They don't look very good, so they will put the chair in another location. These problems are not related to your product.
Recliner sofa brands. The major recliner sofa replacement kit includes recliner handles and recliner cables. There are many different models of recliner sofas. The size of your original handles and cables must be referred to. The Recliner Replacement Handle and Cable is made of high-quality materials and has a long life. The Recliner Replacement Parts include a spring that is added to the end of the cable. The old metal clip should be replaced with two screws on the top of the replacement cable. The handle and cable are more firmly secured with the improved design. You will be more satisfied with the reclining chair after replacement. If you need to learn the installation steps, please refer to the video on the product page, also you can contact them at any time. There are many different models of recliner sofas. The size of your original handles and cables must be referred to. 30-Day money-back guarantee and 12-Month replacement are included in the 100% satisfaction guarantee. If their products don't meet your expectations, you can contact them. Whatever the reason! They are here to welcome you to BarIDWON. 30-Day money-back guarantee and 12-Month replacement are included in the 100% satisfaction guarantee. If their products don't meet your expectations, you can contact them. Whatever the reason! They are here to welcome you to BarIDWON.
👤Even though they watched the You Tube instructions on how to install it, they missed one important step, which is that one needs to run the cable nut at the cable end back towards the enclosed cable, leaving space between them for adjustment, then place the barrel-end into the latch seat.
👤I decided to try to replace this handle myself. I listened to the advice of other reviewers and watched a few videos. I was so glad I did. Instructions and screws are not included in this product. Keep track of the screws you remove from your handle by watching a few videos. I didn't want to have to flip over my sectional sofa for this job, so I didn't want to replace the cable. I bought the wrong handle when I started the process. I needed the clip-style with the wider slot to keep the cable in the recliner. This one is not the same. If you replace the whole mechanism or have the same style handle, it should work. This one is great if you need the style like my chair. It is all metal and installed. I included the photos I needed for this style. I hope it helps.
👤The cables and handle were in perfect condition. Sturdy packaging. I did not have to thread the cable through the chair because the handle was snapped and you lifted the lever to release the footrest. I had to file down the opening for the cable line a few times to get the cable off the attached handle and put the new one on the old one. It was easy to replace and works great again. If I had to replace the cable I wouldn't have been able to unhinge the springs because the line runs behind the gears in the chair. It would take a lot of time.
👤The plastic on the inside broke and the cable that releases the footrest failed. The product was easy to install and had a perfect fit. After attaching the hook, put the clip in LAST. Use pliers to get the old one out.
👤It was a perfect match for the rest of the couches. The ones originally on the firniture were easy to fit and adjusted to. Very affordable fix. It arrived in 3 days after the seller shipped it out.
👤I figured out that I couldn't fix it without the part because I had been fiddling with it for over a month. The guys are honest when they say this is better than the original part. There were no issues. It's nice to have the spare part since it wears out eventually.
👤I had to enlarge the hole in my chair. It wasn't a perfect fit. It is a heavy duty product. The cable and handle is better than the original parts.
👤Our recliner has been snapped. My husband found these on Amazon and I ordered them from here and they were on our recliner the next day. I would definitely buy this product. The handles are still plastic, but they were easy to install.
Home theater chair riser platform products from Smartguard. In this article about home theater chair riser platform you can see why people choose the product. Iprimio and Home Intuition are also good brands to look for when you are finding home theater chair riser platform.
Smartguard, Iprimio and Home Intuition are some of the best brands that chosen by people for home theater chair riser platform. Find the detail in this article. Laminet, Stander and Msr Imports are also brands that their products are worth to check.