Best Home Theater Hdmi Wall Plate

Hdmi 1 Jul 2022 10+ Comments Open

1. Charger Lighting Ethernet Coaxial Keystone

Charger Lighting Ethernet Coaxial Keystone

Please keep your phone screen turned off while you charge it. It will take longer to fully charge your phone if the charging speed is not changed. The snap-in retaining clip makes it easy to connect, it's easy to replace. The wall plate includes 2 Power Outlet 15A, a dual 2.1Ausb charging port, and a keystone jack. The Outlet wall plate has a 2.1 Amp Charging Capacity, and it has a convenient night-awake lighting. The package includes a PCS 2-GANG wall plate.

Brand: Phizli

👤I didn't hesitate to order 2, one for my receiver and one for my TV, so I could hide all the cables inside the wall, even though it was just what I needed for my Home Theater setting. I had to change the TiVO's output resolution from 4K to1080P to work after I ran another 4K-compatible HDMI cable directly from the TiVO output to the TV. I'm not happy about it, but at least I can use the TV, because I have to compromise watching TiVO, AppleTV, FireTV and other 4k video sources. The TiVO resets itself to 4K when there is a problem. I have to switch the cable again. I decided to use a 4k compatible extension cable on both ends of the piece to see if it fixes the issue, but if it doesn't I will not have this beautiful elegant solution. I hope the manufacturer makes a 4k compatible part. I will upgrade my review to 5 stars.

👤I hid the power and data connection behind the TV by using the HUB Outlets. It was easy and worked well.

👤The flush mount on the wall is unbeatable and the multimedia plate is shiny. The cover and wallplate are different colors. The finishing screws are philips. The price is unbeatable. A duplex with two TR is $30 at home improvement stores. This wallplate is flush mount and doesn't leave a big gap.

👤It seems to work well. If you want, you can change the outlet. I didn't need the original outlet with theusb ports because my cable configuration with 12 gauge wire was enough. It worked fine when I swapped it for a regular rectangular outlet. The wires were run into the wall by using the Arlington LVDR2 2-Gang Box. It worked out great.

👤The electrical outlet is terrible. I can not connect my tv to it. The design is awful and frustrating. I have to replace the electrical outlet behind my tv because it is going in the trash.

👤The unit received seems to have been made well, but there was a small problem with the keystone components that arrived with it. There is a The seller was more than accommodating and made up for the mistake after I contacted them. I would definitely recommend it.

👤Very well made product, just installed.

2. Conwork Surround Distribution Couplers Subwoofer

Conwork Surround Distribution Couplers Subwoofer

The face plate is compatible at the moment. Conwork 2-Gang 5.1. The wall plate has 10 banana connections for 5 speakers, 1 RCA for the subs and a keystone for HD video. A screw type binding post with thumb screws can be used with banana plugs. The gold plated ones enhance transmission and are more durable. The female keystone can connect two cables and the F/F jack supports 4Kx2K (UHD) video. 3840x2160 and HD Installation of the audio video wall plate is done with a 2-gang low voltage mounting bracket and mounting screws. The package contains 1x 5.1 Home Theater Wall Plate, 1x 2-gang low voltage mounting brackets, and 1x keystone jacks. There is a limited lifetime warranty and product support.

Brand: Conwork

👤It is not very easy to install. It was supposed to have an HDMI port, but it didn't. It came with two ports. A little angry with that. I made it work. I didn't want to wait another week for a new item so I made do. I wouldn't get it again.

3. Cable Matters Triple Speaker Theater

Cable Matters Triple Speaker Theater

There are dual 5-inch foamed-mica reinforced woofers with wide-dispersion super tweeters. 3 gang 7.2 surround sound distribution wall plate can connect 7 speakers, 1 subwoofer and three devices with HDMI; install this audio video wall plate in a 3 gang low voltage mounting bracket for your home theater system; Speaker wire wall plate is 4.5 x 6.4 x 0.2 inches; mounting screws are The binding post on this 7.2 speaker wall plate has red terminals and can be used with banana plugs, spade connections, or bare 12 to 18 AWG speaker wires. Subwoofer wall plate with female couplers can be used to connect two RCA subwoofer cables hidden behind the wall. Common video resolutions include 4Kx2K (UHD), 3840x2160 and HD1080p. Home theater wall plates with gold-plated binding post and RCA connections provide a reliable connection and distribute authentic audio and video. The 7.2 speaker system wall plate has a lifetime warranty and is a professional looking installation. The 7.2 speaker system wall plate has a lifetime warranty and is a professional looking installation.

Brand: Cable Matters

👤I bought two sets of plates for speaker connections. Most speaker plates don't have an rcs connection for the subs and wouldn't work for me. These worked well for that purpose. Their white is a terrible match to Legrand. On Q. The plate is in an unfinished area in the basement, but in our great room they really stand out. I will have to remove the set in the great room and use individual keystones from Legrand to match. The Legrand keystone straps and wall plates are a perfect match for the Cable Matters Cat 6 keystones.

👤This product is poorly engineered. The plastic part that holds the metal terminals is too thick to fit against the wall. A very new person looks at the installation. I used the orange Carlon old work style open back brackets, which have an extremely this face plate, so that was not a problem. I tried to make it look professional by fussing with it for an hour. What a waste of time. I have a lot of electrical experience. This is a poor product.

👤The screws provided for installing into an electrical box were a joke. A tiny head that was stripped. I used the screws from the extra double gang blank cover plate. The face plate was fastened with the other screws. The most frustrating parts of Chinese products are the crappy screws. It must be a conspiracy to destroy the west.

👤I put my equipment in a closet. It can get complicated when you have surround sound. This makes it much easier to do. It would be great if it included the mounting brackets, but they are cheap.

👤It looks neat and professional, one time setup and saved time, I bought couple to use in my media room and living room, I need to switch my banana plugs.

👤It is easy to install and clear up messy wiring. I like this item because my HDMI cable tends to pull the connection out of alignment.

👤It was great for what I needed. I needed to have one speaker on the other side of the room and this was the one I found. It has a clean look. I painted a different wood wall plate to match the one on my wall.

👤I wish it had the option of jumbo sized outlets since you will most likely be cutting finished drywall to install them. romex is thick enough of a gauge to run behind the wall and stiff enough to run on its own. If you choose to use romex, be careful. Make sure the ground is cut back so you can't make a mistake. If they tailored this product to be compatible with romex or stranded wire, it would be 5 out of 5. If you overtighten, romex breaks easily.

👤I wanted something like this so that I could run the wiring for the speakers into a wall. The wall plate does a good job of presenting an attractive finish, and a dozen wires entering a wall can be attractive. I would buy more if the price were reasonable. I used screw-down terminations instead of banana plugs because I didn't want a wire to come loose and short. With 14 gauge wire, I was able to feed each conductor into the banana hole and bared wire out through the side hole, and then put it in place with the nut. This makes cable management easy and neat, and reduces the risk of interference and shorting between wires. There is limited thread under the nuts, so be careful how much you tighten them. I kept my fingers tight. Maybe an extra quarter-turn using grips. You will lose the threads if you go too far.

4. Premium Media Wall Outlet Outlets

Premium Media Wall Outlet Outlets

There is an ELOQUENT power and connection solution. The in wall cable management kit has power andusb wall outlets. Commercial grade and ultra high approval is Meticulously engineered and rigorously tested. Money back or guaranteed satisfaction? Installation and configuration is easy. Instructions were included. There is a 15A 2 plug power outlet with a variety of ports. Quality connections include 1 Cat5 ethernet jack, 4 HDMI outlet, and 1 coaxial jack.

Brand: Baseport

👤Since the backs are not pictured, you should know that the standard female HDMI connection is on the back. I used two boxes with a lower outlet to get the cable, game, video, etc. There is a high-definition television. I put an upper box behind the TV/Screen and then bought cables to run from the lower box to the upper box.

👤I haven't had a chance to run a signal over them yet, but the hdmi connectors work well. The quality of construction is the biggest problem I have. You make it out of plastic by connecting his thing to 4 HDMI cables. The plastic mounting ear broke off when I tried to screw it in, it was worthless now as I can no longer care for it.

👤The outlet was easy to install, but not a professional av installation. Our fire stick works great with theusb and we have a TV that is hardwired in. If you have a long run of devices, I would recommend buying a separate HDMI to Cat6 accessory to plug in to the HDMI slots, it makes all of your cables difficult to fit into a wall. Overall very happy.

👤The top outlet does not accept plugs. Attempted to force the plug on the cord to be held. No go. The unit was installed before the television. It's not worth the effort to replace.

👤Make sure you have enough room in your wall box. A deep old box is what I recommend. Good quality cables will stay connected behind the outlet. I was very pleased with the product. I would highly recommend mounting a tv and hiding cables.

👤I have nothing to complain about. The only problem I had was attaching it to the stud on the stone veneer wall. Keep in mind the extra 3 inches of overhead when using the HDMI connectors. I had mine loose because of the nature of the work I did. The work is fine. They had what I needed.

👤I love being able to put the tv on the wall.

5. Listed VCE 2 Pack Single Brush

Listed VCE 2 Pack Single Brush

All FosPower products have a limited lifetime warranty. The single brush wall plate cable pass through insert is very easy to use. Smooth and clean home theater installations. Installation can be done in a few minutes. You just need to put the brush on the wall. The package has mounting screws and you can run your cables cleanly through the wall. The same size as a standard outlet wall plate. Old work boxes or Carlon brackets should be used. Please confirm the size of the mounting holes before ordering.

Brand: Vce

👤The product description tells people that the product doesn't fit in the "Carlon" size box. What is that? Home Depot and Lowe's employees haven't heard of the term "Carlon", and they don't use a search engine. The seller needs to get rid of the Carlon name and just specify how far apart the centers of the top and bottom screw holes are from each other, instead of sending potential customers on an impossible mission to figure out what "Carlon" means. The screw holes are so small that they can't claim to fit their own product, and the screws themselves don't match. The long screws are not painted white and you need to use the ones that are on the heads. The silver screw heads in the middle of a white wall plate doesn't look nice, and anyone buying this product wants their wall plate to look nice. There is another set of screws, but they are too short to hold the brush and wall plate together. One of the screw sets is philips. They couldn't just give all the screws the same standard flathead that is always the case with wall plates, so people have to get their philips out as well. I tried my flathead with the philips screws, but it didn't grab the screw well. The screw holes are too far apart, and the wall plate doesn't fit, so I would return these items for that reason alone. Most people have no reason to think that screw holes on wall plates can be different in distance. When you order a shirt, you can't add it to your shopping cart until you specify the size, like when you order a box, you can't add it to your cart until you specify the box size. It also helps people to verify sizes by educating everyone who tries to buy the product. The company assumes that people have no reason to doubt anything. If people don't already know that there are different sizes of faceplates, they won't be able to question the size and read everything carefully. I read everything carefully when I bought a TV wall mount because I already knew I didn't know a lot about the product. The unfortunate reality is that anyone with an average amount of experience with wall plates is going to have no reason to think they are missing anything. They're just going to look at the picture, look at the price, and place the order. The seller needs to do more than just put a bullet point in the description. The ordering process needs to include size verification. The product description states that the plate doesn't fit Carlon plastic frames or boxes. Please tell me the size before ordering. The all caps and double exclamation marks indicate frustration on the part of the seller. The number of people who don't verify the size is higher than what the seller thinks it should be. People are still going to order when it's the wrong size even if you put the entire bullet point in capital letters. Even if someone is lucky enough to read this description, they still have to research what a "Carlon plastic old work box" is. I wouldn't have researched it because my home is brand new, and I thought it was referring to an old work box that isn't used in current homes. If I had read the description, I would have ordered the product and returned it.

6. TENINYU Support Ethernet Extension Projector

TENINYU Support Ethernet Extension Projector

The wall plate is easy to install and fits all standard wall sockets. High Dynamic Range (HDR) video, 18Gbps transfer speed, 4K, UHD, 3D, 48-Bit Deep Color and Audio Return Channel (ARC) are all supported by this. The white color of most light switch and power plug wall plates allows a consistent color scheme throughout your home. Straight/ right angle/ short cable can be combined at will for both ports to meet any inline connections. It is possible to support all HDMI Ethernet channel-enabled devices.

Brand: Teninyu

👤It's time to stop having cords hanging out walls. This works the trick.

7. Fosmon HD8006 Surround Distribution Subwoofer

Fosmon HD8006 Surround Distribution Subwoofer

Conceal cables behind the wall in your media room for a professional looking installation and include a lifetime warranty for peace of mind. The Fosmon 3-Gang 7.1 surround sound distribution wall plate is compatible with 4K@60Hz. The high-speed connecting devices are made of gold. The wall plate has a gold plated connection. The HDMI wall plate from Fosmon is a clean connection point for your audio/visual equipment. hiding cables in your walls is a way to remove cable clutter. All of your sound is included. This wall plate can be used to set up a surround sound system. Banana jacks don't work with dual banana plugs. Only works with banana plugs.

Brand: Fosmon

👤The plate was straight to the point and made my home theatre connections so easy to manage that I can just plug the receiver into the jacks. Behind the wall, cable management is done. I can't speak for the quality of the HDMI ports because I used this opening for a 6-port Keystone plate which I then used for the CAT6a network ports. I only mention it because there is a use case for someone to swap the included HDMI ports for something else that works better in their situation. As long as you have a standard Keystone plate, this can be done. A different plate can be installed just as quickly. The reason I removed a star from the review was because the jacks on the item were not good. After installing everything and mounting it to the wall, I was hit with a constant bass signal coming out of my woofer. I knew it wasn't coming from a specific source since my receiver was off. I removed the wall plate and found that the jack on the inside had broken and the plastic plug had been pushed through to the back. The signal pin was shorting the cable because of this. I moved the cable to the second jack and it broke the first one. I decided not to return the plate because I had some extra keystones and jacks that I just removed and put in this wall plate. There were no more breaking issues after that. If you buy this product, keep an eye on the sub jacks as the plastic looked brittle and could break over time.

👤3 of these were ordered. Two of the three have bad HDMI connections. I tried different cables and tried another outlet. After all of the work, I returned what I thought were faulty cables, but only one of my three actually function. I am going to swap the HDMI gang outlet for another brand because the speaker connections work on all three of them. A lot of work, a lot of problems, and a lot of wasted time. 1/3 of my order price was returned by the company because the gang outlet didn't work. I would try them again in the future. The stars were from 2 to 5. Customer support is great.

👤I like the fact that I can get a 7.2 wiring into one location. I don't need the HDMI because I wouldn't be using it in the walls. The option to include another four-set of post for the plate would be better. I was able to find an insert with eight posts and swap out the HDMI insert for it. This is a nice plate if I only did 7.2.

👤The wall plate cleaned up my cables. The wires and cables were fished out of my walls and put into a cabinet. I could have just bought a wall plate with a large hole in it to save a few bucks but the plate really adds that extra touch making it look very professional. The 6.1 configuration includes the Front Left, Front Right, Center, Surround Left, and Sub Woofer. You can also hook up 2 cables. The left, center, and right panel are released by the 6 screws on the wall plate. The front plate will be put back on after the panels are screwed to the low voltage 3 gang brackets. I used the PROS clean plate from the 3 gang low voltage brackets. The plugs glide in smoothly and are high quality. There is a The HDMI port supports both audio and video. The banana posts were loose upon arrival. It was easy to fix with a pair of pliers.

8. VCE Voltage Mounting Bracket Through

VCE Voltage Mounting Bracket Through

Surge suppression protects against power surge and spikes. The single brush wall plate cable pass through insert is very easy to use. Installation can be done in a few minutes. You just need to put the brush on the wall. It can run your cables through the wall. The package has mounting screws. The single gang mounting brackets are designed to mount wall plates flush. The plate is the same size as a standard outlet wall plate. It's a good idea to use old work boxes. The mounting holes are measured at 3.25", please comfirm the size before ordering. The package contains 3 x single brush wall plate, 3 x single gang low voltage mounting brackets, and 12 x mounting screws.

Brand: Vce

👤These wall plates are easy to install. I used the template from the brackets to cut the hole. The brush and face plate are attached firmly to the brackets. The cords are covered by the stiff bristles in the opening of the brush, so you don't see a large black hold in the wall. The brush section is separate from the face plate. If I wanted to, I could use my own face plate. It seems odd that there are three in a box since I would normally use two - one entry point and one exit point. I plan to mount 3 TVs so I bought 2 sets. It all works out.

👤I traced the inner dimensions but had to cut out a bit more on the drywall because it was pretty straightforward to install. The wall behind me was too small for the long prong in the back that stops the flappers. I had to trim it down by half an inch. The product was great for the price.

👤There was not enough room for the wire to run in the pre-defined slot that is part of the mount. I had to come out of the wall on the other side. The camera was wanted but wires on the other side kept it from being taken. This was the perfect solution to the issue. I have used this to run wire behind a TV where the wires came down inside the wall.

👤I usually buy these at the hardware store, but they were out. I can not complain with these. The fit is very precise and they look great. When I need another, I will buy again. If you only need two, buy the 3 pack. If you are like me, you will find a use for the extra one.

👤The remodel ring is flimsy, but you get a lot of material for the money. I bought two orange Carlton remodel rings at the big box store and they were several times more sturdy than the ones I had at home. I will probably use the brush plate and cover as they look to be of adequate construction.

👤This is a good solution for people like me who want to avoid a wall connection. It won't fit inside, it won't be large enough to hold it in place, and it won't be thick enough to fit in the wall opening.

👤I have a desk and a TV in my home. I decided to get these because I hated seeing the cables. I don't have enough cables to have a dedicated plate. The cables can be run through the wall and out from under the desk. Would recommend!

👤I used 2 of these to pass-through a TV to a closet on the wall. I didn't want to use an overpriced wall box. These looked great.

9. Fosmon Surround Distribution Speakers Subwoofers

Fosmon Surround Distribution Speakers Subwoofers

Plug and play connections, 3.5 MM aux to a wire. The 3-Gang 7.2 surround sound distribution wall plate is compatible with 4K@60Hz and supports HDMI 2.0. The high-speed connecting devices are made of gold. The wall plate has a gold plated connection. The HDMI wall plate from Fosmon is a clean connection point for your audio/visual equipment. hiding cables in your walls is a way to remove cable clutter. All of your sound is included. This wall plate can be used to set up a surround sound system. This product has a limited lifetime warranty. Refer to the website for more information.

Brand: Fosmon

👤The plate was straight to the point and made my home theatre connections so easy to manage that I can just plug the receiver into the jacks. Behind the wall, cable management is done. I can't speak for the quality of the HDMI ports because I used this opening for a 6-port Keystone plate which I then used for the CAT6a network ports. I only mention it because there is a use case for someone to swap the included HDMI ports for something else that works better in their situation. As long as you have a standard Keystone plate, this can be done. A different plate can be installed just as quickly. The reason I removed a star from the review was because the jacks on the item were not good. After installing everything and mounting it to the wall, I was hit with a constant bass signal coming out of my woofer. I knew it wasn't coming from a specific source since my receiver was off. I removed the wall plate and found that the jack on the inside had broken and the plastic plug had been pushed through to the back. The signal pin was shorting the cable because of this. I moved the cable to the second jack and it broke the first one. I decided not to return the plate because I had some extra keystones and jacks that I just removed and put in this wall plate. There were no more breaking issues after that. If you buy this product, keep an eye on the sub jacks as the plastic looked brittle and could break over time.

👤3 of these were ordered. Two of the three have bad HDMI connections. I tried different cables and tried another outlet. After all of the work, I returned what I thought were faulty cables, but only one of my three actually function. I am going to swap the HDMI gang outlet for another brand because the speaker connections work on all three of them. A lot of work, a lot of problems, and a lot of wasted time. 1/3 of my order price was returned by the company because the gang outlet didn't work. I would try them again in the future. The stars were from 2 to 5. Customer support is great.

👤I like the fact that I can get a 7.2 wiring into one location. I don't need the HDMI because I wouldn't be using it in the walls. The option to include another four-set of post for the plate would be better. I was able to find an insert with eight posts and swap out the HDMI insert for it. This is a nice plate if I only did 7.2.

👤The wall plate cleaned up my cables. The wires and cables were fished out of my walls and put into a cabinet. I could have just bought a wall plate with a large hole in it to save a few bucks but the plate really adds that extra touch making it look very professional. The 6.1 configuration includes the Front Left, Front Right, Center, Surround Left, and Sub Woofer. You can also hook up 2 cables. The left, center, and right panel are released by the 6 screws on the wall plate. The front plate will be put back on after the panels are screwed to the low voltage 3 gang brackets. I used the PROS clean plate from the 3 gang low voltage brackets. The plugs glide in smoothly and are high quality. There is a The HDMI port supports both audio and video. The banana posts were loose upon arrival. It was easy to fix with a pair of pliers.

10. Legrand HT2103WHV1 Home Theater Connection

Legrand HT2103WHV1 Home Theater Connection

Excess cable can be stored in-wall and there is slack for convenient access to the back of the TV. The media center can be moved closer to the wall. A 125V receptacle is included. The cable access strap is easy to use. The total outlet is 2. The easy extension of electrical wiring is supported by the other products in the family.

Brand: Legrand

👤There are wires behind my TV. I wanted something that was durable, usable, and good looking. I like that the unit is not square so that furniture can be closer to the wall. Since the three main ports are decora, they can be changed out to be whatever you want. You can change the location of the power outlet. The mechanism for holding the unit on the wall is good. I've taken it off a few times and I haven't had any issues with it. I put a piece of lath at the top and bottom of the hole so that I wouldn't damage the drywall if I tightened the screws too tight. That makes for a good installation. The brush insert was the only thing I kept. I added a keystone plate instead of an outlet and replaced the screw-back speaker plates with ones that have more terminals. I replaced the silver screws with white ones. I'm very happy with this unit, even though I only used the shell. It is holding up a lot of hardware.

👤This uses standard Decora inserts. To get the connections I wanted, I swapped my own keystone plates in. If you need to get more cables to your TV, there's an additional knockout on the top. I like that it allows me to expand in the future. I wish it had the brush. There is a The bad? The screws are made of silver. It's not a big deal if your TV is in front of it, but it looks cheap to have metal screws. The outlet box for power is an old style one that you can find at big box stores. I expected a more elegant solution. It did the job and was easy to hook up. I didn't know how it would fit in a wall. It's your wall, but it should fit.

👤I took the opportunity to run my surround and subwoofer wiring under the house while I was remodeling it, and this box fit the bill. The box is easy to install and can be tailored to your liking. I replaced that section with a Legrand On-Q decora 4-port keystone plate because I didn't need the front speakers. I ran a patch cord up to the TV and hardwired the receiver and PS3 to the other ports.

👤We hired a professional to hang the tv and hang the wall mount. The outlet has a lot of plugs and space. The TV is flush on the wall. Exactly what we wanted.

👤It's a good way to clean up the installation.

👤Excited to install. The product seems to fit my needs. Thank you.

👤Speaker wire coming out of the wall is much cleaner. The brush plate was swapped out for a cat 6 wall plate.

11. Fosmon Ethernet Connector Faceplate Nintendo

Fosmon Ethernet Connector Faceplate Nintendo

The plate doesn't fit plastic old work boxes or frames, please note the size before purchase. The Single Port HDMI Wall Plate is compatible with 4K@30Hz. The high-speed connecting devices are made of gold. This wall plate has a gold plated connection. The HDMI wall plate from Fosmon is a clean connection point for your audio/visual equipment. hiding cables in your walls is a way to remove cable clutter. The HDMI Wall Plate is designed to fit into standard wall sockets. This product has a limited lifetime warranty. Refer to the website for more information.

Brand: Fosmon

👤I'm not a big fan of reviews. I needed a HDMI port behind the wall mounted TV to clean up the wires. The cable box is in another room so it was easy for me to do this. I secured the cover to the wall with a 1 inch hole drilled through the wall and pushed the pig tail through it. I would have mounted this unit with a box, but the dry wall screws held it in place. I hid the hole I had made just to dress it up with a similar cover on the opposing wall. There is a long story short. It makes for a nice clean look with the ability to hide wires. I will connect the over the air TV antenna with the same way I connect the coaxial cable.

👤There are three major issues. The product photo shows the stiff cable. It was difficult to fit the HDMI cable inside the small junction box behind this plate. There are two The internal F-cable cannot be attached to the F-connector because it does not have enough room inside. You need to remove the internal nut to make the connection. The plate on the inside must have small screws. The screws were not all the way in. It looks good on the outside, but the connections are not stiff, and they feel loose when making the connections from the outside.

👤I used two of these to connect a receiver to a TV in either my room or another room with a 60 ft run total, and the little screw that holds the bezel is difficult to screw or get in.

👤It's probably the worst part. Will not buy again. Let's see the flows. The F- connector is too small. You will need to remove the ring to make sure the in wall cable holds it. 2. There are two small screws that need to be attached to the port. The design is not good. hope you have a mini screw set 3. The decora screws are smaller than the US standard so you should keep them. I would rate this product negative five stars. Never again. The money is wasted.

👤I wanted to add a few outlets to the master bedroom of my travel trailer. We needed to run cables from the entertainment center to the tv. Plug and play is what it is now.

👤It is a kit with nine items. The phillips head is one of the four mounting screws. Two of the three are slot. They didn't have the decency to use the slot screws and phllips to secure the inner component with the "F" connector. You end up juggling screwdrivers. You need a jeweler's screwdriver to install the phillips screws. How many of you carry something small when you knock in electrical wires? The doggone "F" is too short. Unless you want to use 3 or 4 threads to secure the in-wall cable connection, you need to remove the nut that secures the "F" connector or install without it. To get the wrench out of the nut, you have to use the toolkit. The stationary hex on the barrel connector is in the plastic. The barrel won't spin if you thread the in-wall cable "F" into it. It turns out that a gasketed RG6 "F" connection will be used to secure the barrel connection to the face plate and make a tight cable connection. The left-over part is the removed nut. The HDMI pigtail is clever and useful, but the rest of the plastic trim pieces are flimsy. A more elegant solution would have been to remove the two piece trim and replace it with a single piece affair. November of last year

Summary

What is the best product for home theater hdmi wall plate?

Home theater hdmi wall plate products from Phizli. In this article about home theater hdmi wall plate you can see why people choose the product. Conwork and Cable Matters are also good brands to look for when you are finding home theater hdmi wall plate.

What are the best brands for home theater hdmi wall plate?

Phizli, Conwork and Cable Matters are some of the best brands that chosen by people for home theater hdmi wall plate. Find the detail in this article. Baseport, Vce and Teninyu are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com