It's easy to clean, machine wash and dry, giving you a fresh cover every time. The cover protects your furniture against stains, odors and dirty paws, and gives you a new look. Are you TIRED of losing your remotes? A remote holder is needed to keep your remotes ready for action. It's easy to install without any tools or holes in the wall. The remote organizer is easy to remove by pulling the tabs. The screws are not recommended. One pack has a remote holder. Each mount has a remote control. The two-pack option has additional savings. It's possible with all TV-related remote controls. The remote caddy does not include remote controls. TOTAL MOUNT is the leader in electronics mounting. TOTAL MOUNT has a long history of quality and reliability and is based near Seattle.
👤I followed the instructions on the command strips that came with this mount. The mount is by my bed after a week. I want to save space on my nightstand by placing my bed by the wall. The wall mount is perfect for my remotes and cellphone to be put in and charged all night long. The wire in the picture is my phone's charging wire. I decided to move this to a wall in another part of the room. I bought new velco style command strips. The wall mount is perfect. Is that correct?
👤Great idea but poorly designed. There is a high divider at the bottom of the holder that makes it impossible to place the four remotes in it. If one of the two is narrow, you can only place 2 remotes to the left and the right. The middle remote rests on top of the divider and leans to the side. There is no need for a divider. The holder was well packaged and shipped with 4ea. Good instructions for 3M strips. I will not return the holder.
👤They helped organize the remotes that were never where I needed them. The fit and finish is nice and the 2 dividers are included in the 3 remote version. -3M Command Strips work well on smooth surfaces like a bedside table. If you want a more permanent install, there are 3 screw holes and 3 screws included. There are no instructions and you probably wouldn't need them if it weren't for the small plastic dividers. I thought they were for smoothing out the glue since they were curved on one side. They fit into the groves on the remote holder. Don't throw them away. Some reviews said that remotes fell over. If the dividers aren't installed, they would. A fingerprint magnet. If you just put the remotes in and take them out, it won't be an issue. The plastic finish shows fingerprints. It is not deep enough for all remotes. Yes, it will fit a variety of TVs and remotes. It won't fit remotes that are thicker than 1.5 inches. It won't fit a remote. It's pretty expensive for a couple pieces of plastic. The bottom is not flat with the dust holes. The remotes fall over if the dividers aren't installed. They may lean against the divider even with them installed. If cost isn't a deal-breaker, it works and accomplishes the goal of adding a bit of organization to the pile of remotes that most have all over the place. It would have been better if it had been made a bit deeper to accommodate thicker remotes.
👤It was perfect. I wanted a way to keep remotes out of my toddler's reach, but still in a convenient place. It was boom! Got it! It is easy to go up with the strips. Strong hold. You want this!
👤The TotalMount Hole-Free Remote holder is made of plastic. The description is not accurate. It says it will fit a few remotes. The only way to use it for 4 remotes is not to use the caddy dividers. If you don't use the caddy dividers, 4 remotes will fit, but they fall down in the bottom of the caddy. The remotes need to be upright in the caddy. They mount the caddy with 3M-adhesive strips. If you don't want to use the 3M-adhesive strips, they also put 3 screws in the mounting caddy. I found out after I mounted this one that they make a TotalMount for 4 or 5 remotes. The original review has been updated. I had to install the dividers after they were not installed in the remote holder. They were very hard to install, so they should have been installed for you. There were two slots on each side. The slots were tight and hard to push. I think it would have worked better if the dividers were put into the remote holder, because they would be able to work them back out of the slots. It is not possible to push them back into the slots. The remote holder is useless and I can't remove it from the side of the table because I used 3m strips to remove them. I have a remote holder on the side of my end table that I can't remove without damaging it. I don't think you should buy this item. It could be a great remote holder with an upgrade, like making the dividers into the remote holder. I don't recommend using the 3M strips if you buy it.
The dimensions are 36''W x 72''H x 14''W. Within 24 hours, they provide the best solution. If there is a missing part in the package, please contact them via buyer message. Premium materials. The product does not contain hooks or shelving liners. The destructible shelter unit. The shelf is protected from water, rust, and corrosion. The shelving unit can be placed in your kitchen or bathroom. The height of each shelf is adjusted depending on your needs, it's super easy to install and enjoy fun of do-it-yourself. The feet can perfectly fit on the ground. It's a smart story. The wire shelves are perfect. It is more suitable for narrow space or room corner to hold odds and ends, such as kitchen, bathroom, balcony, garage, entryway or office.
👤When assembling this type of shelf, make sure the plastic clips snap into a place that is snug together, without a space between them. Start with all four legs flat on the floor and mark a spot where you want to put the shelves with a piece of masking tape at the same level on all four legs. You have to detach the legs' bottom sections before you can put the first two shelves in place. Attach the next sections as you go up. Trust me. I am a woman who has put all her shelves and other items together for friends without help and I have done it up to 18x 48x72" This is the product. It got worse as the day went on. See the end of the comment. If you plan to use it for knick-knacks or folded towels, okay. I need to put a swing arm lamp on a TV in my efficiency apartment, and mine was supposed to hold that. Not good. The shelves are rated at 100 pounds each. These shelves are the first I have worked with that have the support edges facing UP, which gives a rim to the shelf. Not desirable for me. I just looked at the instructions and put the rim down. I centered the shelf holes over the clips and gave them an all-the-way-around tap with a rubber mallet, but the shelves barely slipped down. I hit the side rails close to the support posts. The wire is sheathed. The shelf was supposed to be able to hold 100 pounds. I put the lamp on the shelf because it was flimsy and thin plastic that detracted from the black simplicity of the unit, and I could see the wire under it gave way every time I moved it. This is the perfect size for me. It is a piece of rap. It may be the perfect thing for light weight stuff. Don't expect it to weather repeated use or the placement of anything large. Cute Beany Babies can come to mind. I think the ad is deceptive, but it is probably not untruthful for most of the time. I bought it even though I had never seen it before. Poor decision on my part. I will get a slightly larger one when I return this one. I don't like taking it apart. The legs of the other shelves were screwed together. These are much thinner than other short shelving I have. I found myself becoming a small footprint, lots of storage and display when I was confronted with limited floor space. For the rest of the story... The ad is not true. The shelves are listed at 12x18 but are 11.5x16.5 outside. That means the inside clearances are less. I was close to buying shallow wicker bread baskets to hold my stuff. They would have been too large. I'm really angry. Excuse me while I curse at my cat. I'm called "Mariposa", which means "Butterfly" in Spanish. I'll add a few Spanish words while I'm at it and a few PA Dutch words as well. Problem! He suggested I get a larger box after I told the associate that I couldn't remove the legs. I told him that the legs were up to my shoulder. I was told I would get a refund after I put me on hold. I could sell or give the product away. I found it in my high rise. The puzzlers took it to store their puzzles. It was a nice size. The boxes are a perfect weight for this unit, so if you need a stronger unit, it would be a better choice.
The four steel support tubes have a scratch-resistant black powder-coated finish, while the rigid, thick MDF Shelves have a finish that cleans easily and resists scratches and scuffs. The shelf with the support bar can hold up to 150 lbs, while the shelf with the Inert can support up to 75 lbs. The stand is designed with open air shelving for easy access to components. Unlike most enclosed cabinets, this sturdy design will keep your equipment from overheating. The modular design allows you to build your rack exactly as you need it. Start with the base and add as many shelves as you need. One tier of the stand can accommodate taller components with one set of steel support tubes. Attach the provided support bar underneath the shelf for additional bracing. It's the perfect way to display your components. It's the perfect way to display your components.
👤I bought this stand to use in my audio system without knowing the quality of the stand, because there were no reviews for it on Amazon. It was the best decision I've ever made in 25 years of being an audio engineer. If you're looking for a strong audio stand that won't break the bank, the Monolith XL stand is a good choice. I have nothing to complain about this stand, it's a good quality finish, stable, easy to assemble, and perfect height for my turntable and reinforce shelf, everything is great, and I have nothing to complain about. I may be buying another one that is lighter in color. I'm a happy audiophile.
👤Picked this thing up to hold my hi-fi gear as I finish designing and building my system. I was pretty sure I'd have to build my own media cabinet to hold my gear after auditioning a number of components. The rack is very sturdy after I put my stuff on it. I have a turntable on top of my amplifier, CD transport, and DAC. It's quite handsome. I might just use two of these in place of a cabinet for my equipment because of the amount of so much that I have. I am very pleased with the quality of this rack and would recommend it to others. It does what it needs to do, but it's not the same as a solid maple with sand filled legs or a $2-5k rack.
👤Solid build quality. Nice color. The width of equipment you can place is limited by the support bar between the bottom rack and the middle one. I had to place the amplifier on the top rack because it was just shy of 19''.
👤There is an error in Step 4 of the instructions. The parts list shows item G as a quantity of 2, which is contrary to the instructions. This stand is a good value for the price paid.
👤It is easy to assemble. The delivery guy dragged it to our door and the box was badly damaged, but the shelves had no damage.
👤It's nice looking and holds the weight of my amplifier and my audiovisual equipment.
👤There was a good build and well design with easy to follow steps to assemble but there was slight damage to the packaging.
👤It was well made and engineered. It works well with my electronic systems.
👤I purchased this for my Hi Fi as I needed something a bit stronger than the audio rack that was purchased from Not On The High Street. The rack arrived well packed and the legs were wrapped in cardboard and put in a polythene bag. The unit was easy to assemble and the hardware was supplied in plastic bags so it was easy to check that everything was present and correct. The supplied feet are very good, however, I opted for a set of floor spikes. A great product at a reasonable price. I'm thinking about buying another.
👤Excellent quality audio rack. This is rock solid once it is assembled. It displays all my audio components nicely. The ads show the shelf space at the bottom, but the tallest shelf space can be found at the top. I put it together with this space at the top to give the best air flow for my Pioneer amplifier. The price was the only negative. They have seen a hike in price, but I still think it's worth it. Highly recommended.
US base customer support. The DVD shelf mount has all of the mounting hardware. They are happy to answer your questions about the shelf. To create a width of 4. A maximum weight up to 20 lbs (9 kilograms) can be supported with a 6 inch depth extra shelf using the existing outlet and free up floor and countertop space. You can neatly coil and hide cables with the built-in cable management. The raised grooves hold the devices in place. The hooks hold lightweight items. Modern design is good for any room and wall. It's ideal for cell phones and other electronics. Simply replace the outlet cover in the bathroom, kitchen, dorm room, bedroom, and garage with duplex and decora plates. Customer support is available for 7 days a week, and the package includes 1 x User Manual.
👤I created a situation in my home that resulted in me needing to charge my phone on a wall, so obviously this type of thing is what the doctor ordered. The box housing the outlet is a retrofit surface-mount style box which projects a couple millimetres from the wall surface. I had to modify the box with a Dremel because the shelf wasn't secure. My fault for having a somewhat nonstandard outlet was two minutes of work. No worries. The shelf feels cheap. The plastic doesn't feel particularly high quality and the design isn't what I'd call high end. This thing is $8. It's not hard to be happy with anything that costs $8. Even though I want to say "four stars, feels cheap", I feel like that makes me look dumb. Five stars for doing what it claims to do and being easy to install. Next time, I'll look for a higher end that will satisfy my senses completely.
👤When I got the HomeKit and HomePods for the living room, I was going to put the Google Home in the closet because I wanted to add some smartness to our bathroom. I didn't know what to do with it with limited outlets. I cringed at the thought of the cables hanging or being coiled in the bathroom, and almost bought the older version without cable management. I am a huge advocate of cable management. I can not stand cords. I saw this option. Purchase now! I was a little worried about how it will look in the bathroom, but I will add a sleeker mount and echo dot to the bathroom to make it look better. I was a bit worried about how it would look in the bathroom, and the color was off-white, but it was worth it. I was pleasantly surprised that the counter matches the off-white color. The bulk is something I have to get used to, but overall I like it! The cable management of the shelf is great and keeps the whole thing clean. I might have to order them for other gadgets. I'm definitely going to get another for the garage. Would definitely recommend.
👤I bought this to keep my new electronic toothbush out of the counter. I bought one for my kitchen to keep my phone off the counter. The tabs that snap into the wall mount can be difficult to remove, even though I am happy with my purchase. One was locked into place while the other was not. I was worried that adding too much pressure would cause one of them to lose their mind. I was able to re-adjust it without any damage but I wanted to be cautious.
👤I use my kitchen counter to charge most of my daily devices, and was sick of having cords and devices strung out across my kitchen counter. This shelf changed everything for me. The compartment inside the shelf allows you to hide most of the cord length, so you can pull them out if you need to. There's enough room to place or hang my devices. I bought some white clips and attached my speaker to the shelf with magnets, but my speaker is hanging on a white clip that didn't come with the shelf.
There is a maximum weight of up to 18 lbs per shelf with the large strengthened glass shelf. The slim all-black wall plate with built-in cable management on both sides protrudes just 19mm from the wall when installed, providing a clean overall look with cables neatly hidden. A floating shelf with a height that can be adjusted to free up floor space is a smart design. Quality wall mount solution for holding DVD/blu-ray Players, Satellite/Cable Boxes, Games consoles, Hi-fi and surround speakers, etc. Customer support is available for 7 days a week, and includes a User Manual, Mounting Hardware Kit, and Strengthened Tempered Glass.
👤If you don't mind the gaming systems hanging halfway off the shelf, it will hold them. If you have a power supply unit, the plugs in the back of the system push the front off. I gave it a 3 star because it was easy to assemble and there were no problems with the return. This could hold game systems.
👤The glass shelf is nice. The design is terrible. There are only 2 screws in the mount, one at the top and one at the bottom, and the shelf connects to a single point on the back. The mounts that come with it are terrible, the shelf fell off the wall about a month after I pulled it through the wall, probably because the single screws are not able to keep it from moving. I put in better drywall mounts and it is solid in there now, but the shelf still has some play in it side to side due to the single mount in the back. It's cheap, but it's poorly designed and cheaply made. I am going to use the glass shelf from this to build a new mount for the wall, if you spend a little more money and get a better shelf. So it is solid...
👤It's easy to figure out how it works without the manual, I ordered this to put above and to one side of my wall mounted tv in bedroom for a DirecTV receiver. When the shelf brackets were first created, they appeared to be cheap, but when you tighten the two set screws, they are really good, and you don't have to use a philips head type. It allows you to fine tune the level of the shelf after mounting, so maybe that was intentional. It was easy to mount the spine wall brackets. I thought the screws were a tad undersized for stud mounting, but that's just me. I would be leery of using hollow wall anchors unless I knew the shelf rating was less than 17lb. I had to adjust the two shelf setscrews to level the glass shelf after installtion. There's no way to "manage" much of the wiring in the short spine wall mounting brackets. I can see the need for the 2 and 3 shelf units, but not here. They used the same track and plastic wire fingers to cut them short. Not a dig deal at all. This unit allows you to put an electrical box out of the way on the wall. I was happy. I would recommend this unit.
👤It was easy to install and I put it on top of the TV in the bedroom.
👤I used it for a projector. It was easy to install. The instructions say plastic mollies are for masonry, but I found out they are not. I bought the right ones from the hardware store after trying them. The included screws can be used if you mount to a stud. They have black covers for the screws. The glass top has a screw to hold it in place. If you crank it down, you will shatter the glass. The screw should be tightened lightly. Just enough. It holds the glass in place. The metal wall mount has space for cables. It doesn't really hide the wires in my case. At this price point, I can't be happier.
The smell of freshly baked pizza and a glass of red wine can be found in your kitchen, and you can create the perfect atmosphere with their industrial furniture from VASAGLE. The baker's rack is high time if the mixing bowl has to be placed on the stove or the kettle on the floor. There are many shelves for storing baking utensils. The microwave oven can fit on the work surface. The kitchen rack has engineered wood shelves resting atop steel tubes that hold 176 lbs of cookware, plates, pasta boxes, pots, pans, and more. 6 S-shaped hooks are included for holding ladles, spatulas, and towels, while a pull-out wire basket is perfect for measuring spoons, or a whisk. The ALINRU Collection includes a Baker's rack, 4 storage shelves, a wire basket, 6 S-shaped hooks, and an easy-to- follow instructions.
👤I am very happy with this purchase. It has a lot of storage. It is not real wood, but the veneer is really nice. No complaints!
👤We bought this cart to put a home freeze dryer on because of the reviews we read. There are two issues with the cart. The little wrench that was included does not fit the nuts. When you put pressure on it to finish it's job, it slips off. That is useless. A crescent wrench can't fit in the narrow space between the nut and the bottom of the cart. That was very frustrating. Had to use a needle nose to get in. The second concern is something I worry about a lot. I don't feel comfortable putting a freeze dryer on the cart because it is skewed after assembly. The cart failed and I can see it hitting the floor. It's nice looking. I don't think it will last for long at 60 lbs. This was not a good purchase for me.
👤After spending 30 minutes opening the box and laying out all of the pieces, I started by putting the first leg in. The first leg tore sideways out of the wood as I moved the top with the leg attached to install the other legs. I won't buy from this company again. The wood is not real.
👤I love my kitchen appliances. The stand saved the day. My rice cooker, crock pot, and stand mixer never have to be moved. I have an electric kettle and burr grinder under the tray and it's perfect for holding my tea. The person was in the assembly for about 30 minutes. The picture instructions are easy to follow and include both a wall-tether and spare parts. The product was thought out by the manufacturer. I'm very happy!
👤Solid table. The other reviews said the wheels were bad. They drag instead of rolling on the floor. We went to Lowe's to get replacement caster wheels. It rolls like a charm now. The shelves were not the right height so we drilled different holes and used them for what we needed.
👤1. I bought this to hold my PC. The top shelf was supposed to be real wood. I found out when I received the unit that it was a wood suck onto a composite. 2. I bought this unit over the darker stained one because it was supposed to come with feet that I could screw into the bottom instead of using the wheels. The unit did not have feet. I called the company to see if it would come with feet. 3. The bolts and nuts don't have the same thread so they don't work together. 8 of the bolts and nuts won't screw into each other. I need to buy new bolts at the hardware store to make sure they work. 4. Extra items can be put on the wire mesh shelves. I put pressure on them with my hand to see how strong they were, and I noticed that the welds that keep the mesh attached to the frame were starting to break. I had to buy shelving material at the hardware store to make the mesh stronger and to protect myself and my belongings from the sharpness of the shelves. I kept the shelves because I needed something and I didn't want to go through the hassle of returning, but I wouldn't recommend it to anyone else. I wanted this unit to work. I was very excited by it. It has been one let down after another.
It was deliberately designed. The cup carriers are designed to fit the soda can or water bottle. If there is no liquids involved, you can use the cup holders as a larger tray for your food. The media console is ideal for storage around the TV. It's made to hold stereo equipment, center speakers, gaming consoles, DVD players and streaming devices. You can store your audio equipment in a heavy duty audio tower with 88 lbs of carrying capacity. The air is cool. It was designed with gaps for air flow. This minimalist design will ensure that your devices receive a cooling circulation of air that will keep them from overheating. The dimensions of the fridge are 24in (wide) x 15.5in (deep) x 27.75in (tall). The shelves are separated by 8 in of space for larger components and increased air flow. The cable management system is in the back panel. It will keep your cables neat. The wood shelves are built from a black lacquer.
👤The treaded rods screw into the top and bottom. The top has a treaded opening that doesn't have a solid stopper, so you have to screw it down until you find out that the rod is too short to fit into the bottom leg caps. The instructions don't mention the need to only tighten lightly as to not damage the top, like I did, and leave enough threaded Rod for the bottom plastic feet. If they stopped the rod from going through the wood top, it would be a decent unit. While the building is being finished, be careful with TIGHTEN. Disappointed!
👤The design of the shelf is based on a wire frame. The front of the store has metal poles that are securely holding the shelves, but they are made of plastic tubes with a wire frame. The only thing that is strong is the shelf that sits on top of the plastic tube for each row and the two screws on the backplane/wire management panel. Had I known, I wouldn't have bought this. One of the wires had a stripped screw head and wouldn't fit all the way into the base. The entire cabinet was made flimsy because the screw head was not securely embedded in the wood. I paid a lot of money for this product, but I think it's not worth it.
👤The media stand/shelf is very nice and neat, and it's for the price. It holds up a lot of expensive electronics, like a mixer and an Amp, and is very sturdy. The hole behind each shelf should be placed a bit lower, instead of being at the center. A nice media shelf at a reasonable price.
👤I was very happy to order this cabinet. I match well with the equipment in our house. The cabinet is sturdy enough to hold my equipment, which is pretty heavy. The shelves are very open which will keep my components cooler. I had it done in 15 minutes and there were no problems. If someone found this hard to assemble, they should consider hiring someone from now one because I haven't found anything easier to assemble than this cabinet. Since it only has a narrow strip as a back panel, there is no place to hire the wiring so it is visible from the front. If it bothered me enough, I could paint a piece of particle board black and put it back there, but I don't think I'll do it. I was very happy with the purchase.
👤It holds my audio equipment, but not my 200 cd player. I had to put that on top of my turntable. I had to add a piece of plywood below the two to make it level. There are pieces in the back of the stand that limit how far back the wood can go so it sticks in the front. If you don't care about looks, it still does a good job.
👤Sturdy and awesome. I thought it was slightly taller but would have ordered anyway. I'm not putting a TV on this one, just gaming systems next to my TV stand that doesn't have enough room. There are holes in the back of the levels. I'm going to put anchors on the back of my cable box, and there's enough room around the holes to hide cables if you're going to do this.
Premium grade Clear Acrylic. The overall size was 9 inches W x 6.25 inches D x 6 inches H. The 3 Step Stair display has deep steps that are used to display and organize items. The two support legs in the rear of the item are easy to remove. The raised tiers help to make your products stand out. They use a protective film on them to protect them from damage in transit. Many reviewers are complaining about their risers being cloudy or scratched because they missed that. The film is clear when it is removed.
👤I assumed the rack was close to being seen when I looked at other reviews, but when I took it out of the packaging, I realized it wasn't. A man. This is dull and plastic tearing is not. I was disappointed at first but I put the legs on quickly. sigh I'm going to send this one back at em. I picked up the instructions again to see if they need to be wiped up since it came with a lint free cloth. Wait a second? Please remove the protective film on both sides before use. What film? Wait what? I took the screw legs out and peeled off the plastic that was tearing and the scratches that were in the outside and it was just as shiny and see through as the pictures showed.
👤The stand is very sturdy and doesn't take up a lot of room, so I recommend it to anyone who collects figures or amiibo... If they have stands. I had to compromise when it came to the poses of some of the figures, as well as accepting that they may slip and fall, which isn't great, because the depth of each layer doesn't allow for enough room to feature a figure with stands.
👤I got the steps to try and display my Pops. The acrylic has no scratches. The plastic on the steps did a good job of protecting it. I like how it ended up working out. I bought 3 more because I liked it so much, but the 9-in shelves were sent to me by mistake. The good thing about this mistake is that if you are wondering how the 9-in steps look with Pops on them, then here you go. The 12-in step on the left and 9-in step on the right can be seen in my picture. The 12-in steps give you more room to see the details, but the 9-in steps make the figures hide behind each other.
👤It is very easy to assemble. Each leg has a little screw. There is a plastic cover on the shelf. I put them in our bookcase to show off our glasses. If you measure the area you want to put it in, you should remember that the top reaches high. I added our little monster car collection and used only 2 shelves of the 3. Everything fits and you can see the cars through the clear plastic. There is a glare in the picture but not in person. They also give you a wipe cloth, like the ones you get for eye glasses. The price for 2 little plastic shelves was almost $34 dollars, but it's too expensive for most things these days. I still rate them a 5 because I loved how they turned out. I wouldn't put a lot of weight on it because it holds figurines and shot glasses well, but heavy objects might break off the back legs. Before you order, ask them and read the ad. It's true.
Each shelf can hold up to 350 pounds and the max load weight is 1400 pounds. No tools are required to adjust the wire shelves. The steel construction has black-coated chrome finish. The product is 36 x 14 x 54 inches.
👤This shelving unit is great for people who need to be humble. It will make you cry as you try to lift and lower the shelves onto the plastic puzzle pieces that are supposed to hold them up. Will the plastic things stay in place, or will they fall to the floor, forcing you to start over? Will they stay in place, but leave you with a shelf that isn't level? Will you be forced to look at that shelf every time you want to make something in the microwave? The shelving unit is more than just a shelf. It is an exercise that builds character. You will learn to live with "good enough" if you confront your need for perfection.
👤I am confused by the reviews that talk of frustration. It was easy to put together. 30 minutes, tops! We had to decide how far apart we wanted our shelves. To all of the reviewers who had trouble with assembly, I offer you this insight. The plastic pieces are not supposed to fit around the pole. 2. The shelves are designed to slide over the plastic pieces like a sheath. 3. If you don't follow the instructions on the plastic pieces, you won't get this unit assembled. When you put the plastic pieces in the grooves of the pole, you just slide the shelves over top of them. The plastic pieces will fit inside the collars on the shelves. I am certain that some reviewers didn't know how to assemble it after reading the negative reviews. We liked the first one so much that we bought a second. I decided to wait it out this time. A person is from box to completely built in less than 18 minutes. Unwrapping and opening bags are included. Some people misunderstood how to put it together, so don't be afraid. This can be assembled easily. By yourself. Less than 30 minutes.
👤Where to start? A nice, heavy box arrives, open it to find sturdy metal shelves and poles, and instructions that are simple and easy to follow. The quality is worthy of a 5 star review. Until you start to assemble the unit, using the cheap plastic collars that are supposed to snap together and the metal shelves. First of all, they won't snap together, they will just meet. This will make sure that if you try to put a shelf on that at least half of them will pop off, forcing you to try and get them all connected, which will fail again and again. You will get them all together, put the shelves on them, and think you are home free. Oh, silly person. The cheap plastic collars on the shelves will fly off once you start loading them, but this time with the stuff on the shelves slipping and sliding off. The small pieces of plastic are supposed to support hundreds of pounds of weight, and are what holds up every shelf. Let that sink in. Thin plastic that supports hundreds of pounds. Why would Amazon make this shelf cheap when it needs to be sturdy? It would not have cost much more to make locking metal collars that would support the weight required and stay where they are supposed to be. If they had done that, this would be a sturdy unit and a 5-star unit. While it is currently together, I have low expectations that it will stay that way, and am only storing extremely light, unbreakable things on the top two shelves. I will be looking into other ways of stabilizing these shelves, at which point they will serve the purpose I ordered them for, but at a higher cost and far more trouble than I wanted. If you put your name on something that is pretty worthless, you should fix it quickly.
Tired of placing stuff around in a grid? Try to do it vertically. You can use the empty places above the table to organize your items. You can install the wall shelves with a single click, giving your messy living room, bedroom, bathroom and kitchen a new look. The shelves are simple to fix and maintain. The floating shelves are designed with solid wood and industrial metal brackets, and they allow for a delightful decoration to match any design or style of room. The triangular design of the assembly offers two different display forms. You can put the board on top of the brackets or below the shelves. Pick the way you want the shelves to be displayed and match the decor. It is easy to assemble. Medium: 14.2 6 4.8 inches; Small: 11.4 6 4.8 inches. These floating shelves are larger and stronger than others and can hold a lot of things. It is easy to install with all the necessary hardware and you can assemble in minutes. Why purchase this product? This is a great addition to your home because of the sturdy structure, easy installation and elegant design. Their beautiful wall shelves can be used as cat shelves to allow the cat to have its own space to rest and play. Why purchase this product? This is a great addition to your home because of the sturdy structure, easy installation and elegant design. Their beautiful wall shelves can be used as cat shelves to allow the cat to have its own space to rest and play.
👤I did not use these as shelves. I used them as cat stairs for my son's cat. They have been working well for that. We have a big heavy cat that is holding up well.
👤The wood is strong enough to hold a 20lb cat. This was a cheaper alternative to buying real cat wall furniture. I searched the internet for cat wall ideas because I don't like real cat trees and think they take up too much space. This was perfect! I made sure to use dry wall screws and make sure to line up the holes right. I didn't realize I screwed the holes wrong when I jumped the gun. I lined the shelves with grass turf to keep kitty safe.
👤I used these for my bathroom shelves. They all look the same in color.
👤These were bought as an accent to the ceiling fan in the master bedroom. They were easy to install. The stain and wood was cheap and rubbing off on my hands and bedsheets as I worked. The picture of the stain on the bedsheets is from the shelves that I sat on the bed and assembled. I'm a little worried about cleaning them with a spray based cleaner because of the stain coming off completely. I wouldn't use the shelves to keep towels because of this. We're not using them for that so it's not a big deal.
👤I wanted to add more space to my bar. They matched the wood. I trimmed the large shelf to match the middle one because it was the perfect size. The tan wood pen worked perfectly to blend the cut. The shelves are sturdy and easy to install. It was a great addition to my bar.
👤The shelves are great. There is some variation in the boards but that doesn't matter to me. I put them all in a line and put them on a long shelf. They are wide enough to fit movie cases. These shelves are the perfect size for a great price, and they are wide enough to fit in an arm and a leg. They are easy to put together and mount. When we get more movies, I bought another set. For reference, all three fit 20 DVD's, 50 blu rays, and 10 video games.
👤The product was good out of the box. It was easy to set up. For a few reasons, I gave four stars. The drill measures in the instructions aren't in fractionals, which is what you find on drill bits. I used 5/32 and 7/32 drill bits. The color of the shelves is a major reason. Three of the four were lighter brown and the last one was significantly darker making it look like it came from a different set. This is a draw back for me.
👤These shelves have been a huge disappointment. I got the first set and one of the brackets had different holes. I ordered a replacement. When the replacement arrived, everything appeared to be correct. The wood is very flimsy and I decided to pre-drill holes in the bottoms so that it wouldn't split during installation. This helped. The third shelf I have had sitting waiting to be installed for books, but have been doing a remodeling project, wasn't able to be installed right away. I went to install it tonight and found the holes weren't stamped correctly. I replaced the item once and it worked the same way. I am not happy with the craftsmanship of these shelves. Don't waste your money. You pay for 3 but only end up with 2 that are not worth what you pay.
It's possible to free your home from all the stuff. You can place fancy items in an unexpected place thanks to the magic of floating. The rustic shelves can help you make use of your empty walls, which will save space and make your room look larger. Do the walls of your house look plain? Amada Paulownia wood floating shelves are great for bringing your walls to life. A unique brown with industrial triangle metal brackets that blend perfectly with the rustic and contemporary style would be an attractive decoration. These wall shelves are larger and longer than regular shelves on the market, providing more room and worry-free storage. Large: 16.4 5.9 0.7 inches; Medium: 14 5.9 0.7 inches; and Small: 11.4 5.9 0.7 inches. It is easy to install with all the necessary hardware. Are you tired of cheap quality? Their premium wood shelves are made of solid Paulownia wood and reinforced metal brackets, which are sturdy enough to hold up to 40 lbs, and are great for organizing books, collectibles, plants, and trophies on the wall. Do you want the wood shelves to be your favorite style? You can arrange the layout to meet your needs or you can install the brackets on the top of the board. Who knows your home better than you? You can make the shelves to make your dream home.
👤I have realized how disorganized I am in my small apartment. I have a big open space above my sink, but little counter space. I needed to find shelves where I could put command strips because they don't want holes in the walls. These worked well. I got some sturdy command strips after cleaning my wall with rubbing alcohol. So far, so good! The shelves are small, but they can hold my butter dish, tea, and anything small that I need to get off my counter. I can have more space. I will be ordering more for my bathroom.
👤Cheap wood. Not done properly. It looks like they just painted it. It will soak right through if I spill it. The wood is not smooth. I am confident that it will hold some weight. I feel like I'm sanding it down, even if I have to scratch off the paint. I wouldn't be able to do that.
👤My son's space themed room was perfect with these shelves. You can attach the braces above or below the shelves. I think it makes them more universal. They are lightweight but sturdy. They came with great sheetrock and stud anchors for attaching the shelves to the walls. I would highly recommend them to anyone.
👤I like the look of these shelves and how easy they were to install. Exactly what I was looking for. The wood was not as heavy as I thought, but it did a great job.
👤All was good once I got the shelving installed. The brackets look good. They work for what I wanted. The installation hardware was useless. I used my own anchors after two attempts of the same thing, and they all worked out. I tried to install per the instructions. I had to use an angle screwdriver to screw the screws into the anchors as a regular screwdriver simply wouldn't work unless you put the screws in at an angle.
👤These shelves are great. Light weight. They have held up well so far. Since they are light tacks, I wouldn't put anything heavy on them if you choose to do this, but I couldn't use the screws to hang them.
👤As described. Half of the metal pieces are slightly bent and it ends up not being symmetrical on the wall when you attach them to the boards. It was helpful to have all the screws and wall anchors. I would like the shelves to be longer, but that is not an item fault. Attaching the board to the metal pieces is a good idea, but be careful.
👤The 3 tiered shelving unit is nice. The metal brackets fit the wooden shelves well. The shelves are a nice shade, but there were some scratch marks on one side and it was necessary to put the lesser defaced side on the top. The boards were not completely flat and were cupped slightly in hopes that the weight of items placed on top would help flatten them over time. The shelves are light and feel like they are made of wood. When attaching them to the brackets with the short screws you need to be careful not to tighten them too much as they will strip easily. They have extra screws and wall anchors for several wall types. The instructions for assembly are not very helpful. They look good hanging in our bath with several decor items on each shelf.
Home theater rack with shelves products from Totalmount. In this article about home theater rack with shelves you can see why people choose the product. Yohkoh and Monolith are also good brands to look for when you are finding home theater rack with shelves.
Totalmount, Yohkoh and Monolith are some of the best brands that chosen by people for home theater rack with shelves. Find the detail in this article. Wali, Wali and Vasagle are also brands that their products are worth to check.