Best Home Theater Receiver 5.1 Alexa

5.1 9 Dec 2022 10+ Comments Open

1. Denon DRA 800H Amplification Processing Compatible

Denon DRA 800H Amplification Processing Compatible

The high-performing receiver (100W per channel at 8 ohms) that offers greater stability with a wide range of speakers, and delivers balanced sound each time, is a must have. Denon's experience in designing award-winning amplifier and their use of Hi-fi parts, custom resistors, audio grade capacitors, a double differential DAC circuit and analog preamplifier circuits deliver a superior sound experience. Full 4K Ultra HD 60Hz video, 4:4:4 Pure Color sub sampling, and HLG pass-through are included in the advanced HDMI video section. You can watch your favorite movies and shows with clarity and contrast. You can enjoy multi-room streaming with built-in HEOS technology, which allows you to play music from any popular streaming service in one room. Voice control can be used with all major voice agents. Command any voice agents or smart home automation systems. You can listen to your favorite tracks stored on a memory device via theusb port on the front panel or through network sources. You can connect your turntable to the speakers or amplifier with the integrated MM equalizer. Denon has a 100 year legacy of sound and joy. The amplifier for the home theater and entertainment system will give you multi-dimensional audio and sensational surround sound.

Brand: Denon

👤I want to give this receiver 5 stars for sound quality and features, but a few things hold it back. I'm happy that this receiver is 2.1 and that I don't need any more speakers, but the reality is that you need HDMI switch and this receiver fills that need. I give it 5 stars for sound quality. Excellent resolution, clarity, and flat non-colored response are what it sounds like. It is well above its price point. The large Amps give it authority to play loud. The sound mode options can be changed with a button push on the remote. I bought this thinking about the good old days when you had tone controls on the receiver. I end up playing this in Pure Direct mode, which ignores the tone circuits, balance, Restorer and even the unit's display. I replaced my 35-yr old 3-way speakers and sub with a pair of Tekton Pendragons because I was very happy with the sound quality. Again, 5 stars. The ability to use the receiver as a preamplifier only is one of the inputs and outputs. I have a firestick, blueray, and rasperry pi. There are both optical and coax inputs, as well as the ability to play music directly from ausb stick. You can change the name of the input selections on the display. Heos will give it 3 stars. I don't want my phone to be involved in HEOS operation and I don't need the features to direct sound to another room. I don't stream. The play buffer is limited to 300 songs, so playing music from a computer on the network is fantastic, but it's not as good as playing music from a stick. This is not a good thing. I wanted to just load my music on a stick, hit shuffle, and then be done with it. The first 300 songs are put in the play buffer and you can only shuffle them. 2 stars is the best rating. It only supports the SBC. The DAP will only connect to this unit with the SBC, which is not compatible with LDAC. The receiver does not support aptX or aptX-HD. The ECO mode is interesting. It appears to use less power for smaller volumes. You can hear a click as the receiver turns on more power. It keeps the unit cool. I was able to get around the HEOS and bluetooth limitations by purchasing an Xduoo 10T-ii digital transport player. I connect directly to the DRA's coax spdif and use the DRA's internal DAC for music, and it sounds awesome with a flat detailed response and high clarity. The DRA800H doesn't have a digital connection. It would have been nice if a BNC connection had been used instead of the RCA spdif. You have to set the inputs. I couldn't get the unit to play the analog out of my Sony DAP, but I had to set the input for analog, and then everything was fine. I had to change the digital input to be coax. I had to dump all my mp3s in favor of flac as the difference is obvious due to the high sound quality of the DRA and the Pendragon speakers. Bob Dylan sounds like he's in the room. The DRA800H is a great buy at it's price point and is loaded with a lot of features. The HEOS and bluetooth support for modern codecs need improvement, but are easy to work around with a digital transport using the DRA's spdif inputs and internal DAC. The Pure Direct sound mode is awesome and the sound quality is above its price point. The DRA's dedication to 2 speakers is excellent. I can put my money into the best speaker pair.

2. Denon AVR S960H Channel 90Watt Receiver

Denon AVR S960H Channel 90Watt Receiver

You can enjoy Immersive surround sound with the help of the new 3D Realism for your home theater system. You can get the most out of your 4K TV by enjoying the highest quality audio and video. The most demanding entertainment needs are met by this high-power amplifier. The next generation of gaming features a smooth, lag-free experience with 4K/ 120Hz pass-through, Variable refresh Rate (VRR), Quick Frame Transport (QFT), and Auto Low Latency Mode (ALLM). Enjoy the most advanced video technology. Quick Media Switching eliminates video delay. You can connect with any HD/ULTRA HD TV, SubWOOFER, BLU-RAY PLAYER, and Turntable for Incredible Stereo Sound with a range of wireless connections. If you want to extend the reach of your music to any room in the house, you can use a variety of wireless speakers, like the Denon Home series. You can get hi-fi audio around your home with a number of services. On-screen setup assistant provides simple, clear instructions to connect your TV, Audyssey MultEQ XT, and the audio system in your home for an optimal listening experience. Does not support pass-through from 888-739-5110

Brand: Denon

👤I upgraded my receiver for the next generation of consoles, and this thing definitely delivers. It's only giving 3 stars because it's crazy. Adding fans to your home theater equipment is something you should be prepared for. This thing is very hot. If this thing is tucked away, I recommend adding an alternative cooling solution because some of my equipment shuts itself off for thermal protection after installing this. Make sure it has proper air flow here.

👤The biggest negative is that you have to turn the receiver on and then turn the receiver off again. If you select the input on the remote, it turns the receiver on so you have to turn it off again. The life span of the product is going to be shortened. It would be nice if the input was still switched while the receiver was in sleep. The receiver is amazing. This is my first Denon receiver. It is easy to setup. The on-screen prompt on your TV walks you through each step, but it also walks you through how to connect the speakers, what to do with the wires, and so on. A microphone and stand are included in the full system calibration. The setup was easy. The sound quality is amazing. Great range and power. If you don't want to always have your receiver on to watch your various sources, pass through capabilities for HDMI is a must have. It breathed life back into my speakers. The quality of my receiver is very similar to that of my 15 year old one. 8K is amazing. You can control the device from your receiver remote with the help of the internet. It easily connects to iHeart. This system has everything I needed and more. Can't believe the price of this unit is more expensive than others. The internal radio sounds better. It's nice to have a touch on the remote on your phone, but it's clumsy to use at times, and it needs some work. Well done Denon! The remote is made with light plastic and has limited features. It would have been nice to have a higher end remote.

👤Amigos produto. The interface and controle remoto were precisam. Som sensacional.

👤timo custo. Inclui zona 2 Balanceamento automtico das caixas acsticas. com memorizao intuitiva, captao das rdios.

👤Sistema! O melhor? A qualidade de som dos sites is controlled by the headfone. A recuperar os mp3 com densidade.

👤No tienes un equipo de alta gama.

👤It is called excelente. A qualidade impressionante. A compra.

3. Sony STRDH190 Stereo Receiver Bluetooth

Sony STRDH190 Stereo Receiver Bluetooth

Enjoy your home audio experience in the comfort of your home. 100 watt x 2 watt. The speaker impedance is 6 to 16. 3.5 millimeter input, stereo RCA output, and Phono input. You can stream your favorite music service, podcasts, and more from other devices. A/B can switch to play all at once, or in separate zones. The low profile design is easy to fit into a conventional cabinet. There are 30 station preset on the radio.

Brand: Sony

👤I've owned some very nice and very poor stereo receivers. I would give SONY high marks for design and build quality, but that's not the case with this receiver. I want to know how fundamental is something as a speaker connection. There are many tried and true methods, including screw-down binding posts and banana-plug connectors. The cheapest version uses the "clamp-down" version. Sony has taken this cheapness to a whole different level. Read on. Most of us know to use decent speaker wires, which have a decent amount of wire within the insulation, but "monster cable" is the exception. It's the same diameter as appliance electrical wire. I tin the tip of the wires to prevent them from unraveling. Sony made it impossible to use good speaker wire on this receiver. The cheap "clamp" type connector is not a good speaker wire and the opening is not large enough to fit a paper clip. Look at photos. The old Radio Shack receiver that this unit is replacing had good speaker wire connection posts. I had to cut one of the fingers off of the electrical connection so it would fit into the tiny space when hook-up time came around. I'm thinking of returning the entire unit. This is an example of a product that is not going through any quality assurance testing, especially by engineers in charge of designing the unit. I am not surprised that Sony had nothing to do with this receiver. It happens all the time. If you want to purchase this cheap receiver, you will probably have to use speaker pins, and I really dislike these things! There is a speaker with plugs and a speaker with connections and pins. Tome is in charge? That's on the remote control. How about a pair of headphones? Again, on the remote. Almost all of the "critical" adjustments are done on the remote control. If you misplace the remote control, get it wet or break it, you're SOL in regards to operating this receiver. You might think of ordering a second one just in case. I prefer to have actual KNOBS on my receiver for low, mid, and high frequencies, as well as some other critical functions such as loudness, tape monitoring, etc. Sometimes you don't get what you pay for. As this receiver seems to be in the marketing advertisement and from other "reviewers", you might want to broaden your search to include a different manufacturer. This is not the Sony I used to know.

👤I needed to replace my Yamaha receiver from 30 years ago. I was looking for a receiver with a phono input that was reasonably priced. I settled on this Sony and have been happy with it. It was easy to set up. You can plug in a phono jack with grounding wire and add additional inputs. You can use the remote control to change the inputs. Speaker wires can be put into the back of the clamps. The sound quality is good. Once the wire is tightened, the phono doesn't buzz. Everything is balanced through my speakers. My old receiver didn't have a feature that allowed me to pair my laptop with it and play my library without interruption. It works as well as the other way around. There are a few cons about it. You can only pair it to one device at a time, not both. I have a home clock and radio that is available online, but I don't think it's a big deal. You can use the remote to access preset on the radio. You can have up to 30. You need to hit the forward button on the remote or scroll with the on board knob. The tuner scans slowly to find stations. If it's not important to you, this makes for a very solid home receiver and very reasonably priced.

4. YAMAHA RX V4A 5 2 Channel Receiver MusicCast

YAMAHA RX V4A 5 2 Channel Receiver MusicCast

HDCP 2.3 and eARC are included. 4K/60, 4K/ 120AB, 8K/60B, and HDMI 2.1 are available. MusicPlay, AirPlay 2, and Spotify Connect are available on the internet. MusicCast can be used with MusicCast 20 or MusicCast 50 wireless surround speakers. Voice control with a variety of devices. TIDAL, Deezer, Qobuz, Amazon Music, and others. The movie "Dolby Atmos" and the movie "DST: X"

Brand: Yamaha

👤The wrong chip was installed. This can't be passed through HDMI 2.1 with a firmware upgrade. The PS5 XBOX Series X and Series 30 cards send a signal. The hardware won't support an uncompressed signal. Don't be like me. Wait to upgrade when it's confirmed that it works with the next generation.

👤I am setting it up now, but so far I am impressed. Make sure to download and use the MusicCast app to setup. It took me a while to connect. You can easily setup everything with the MusicCast app. You can change the settings on each input. The X900H found the receiver and walked me through the integration process. I can play music on my iPad with the help of the receiver. The unit is much larger than my V373, and it is shiny. Feel free to ask anyone's questions. It looks like all the new AVRs were built with chips that may not be able to produce full 120/4K over HDMI. Yamaha says that a future update will fix the issue, but I am starting to wonder if I bought a failed product. I wouldn't purchase until this is sorted. You can use eARC to route the audio from your consoles to your TV. If you have an eARC compatible receiver, this is not necessary. Hopefully they will give a new receiver to those of us who bought them, if the update doesn't offer full 120/4K support. They can fudge it by offering a lower color range, and still output 120/4K.

👤Ignore the other rewiews! This Receiver does full 4K pass through via HDMI.

👤The Sony X900H is running the PS5 and the Xbox Series X, but the function is broken. Audio will be dropped from 1 second to 30 seconds in some TV apps. The only way to get no audio drops is running at 4k 60hz, eArc can't handle it. No audio drops are confirmed when you switch to tv speakers. The same issue has been reported with other tvs. There is a fair amount of color banding when running the PS5 in hdmi mode 1. To remove it, you have to change to hdmi mode 2. The receiver says it went from YCbCr 4:2 to YCbCr 4:2:0. It isn't working right. The sky has extreme color banding, also tested with 4KUHD movies. There were no issues with color banding or HDR when tested. The audio processing and sound itself is great for the price. Hopefully the next update will address these issues.

👤I'm impressed so far. This is my 4th purchase of a receiver and it's my favorite one yet. The pure direct button on the remote is something I don't like. The bass response in movies and music is much better than it was in the past, it's much more accurate and present at all volume levels. The scenes feature is new to me and I'm excited to use it. The speaker distances were within.05ft of the margin of error. I boosted the bass with a 120hz bass boost and changed the output from 80 to 120hz for a smooth bass overlap with my towers. I have a large living room withvaulted ceilings and a wide open layout, and I like the idea of a movie theater experience with this receiver and the andrew jones line of speakers. The preset for music, movie, weird dsp effects are still not good. Worst sound possible using enhancers. I think it's time to stop using these features.

5. Wireless Bluetooth Home Audio Amplifier

Wireless Bluetooth Home Audio Amplifier

The peak power of the Pyle 5 Channel Hifi Audio Amplifier is 100 watt. You can enjoy crisp and high quality amplified audio with low distortion and acoustic accurate audio reproduction. Bluetooth is a cannabinoid. The small personal integrated indoor stereo receiver has a wireless music streamer. It works with today's latest devices, including laptops, computers, and phones. The professional Hi Fi amplifier supports many external devices. 5 sets of spring loaded speaker terminal connections are included. Front control panel. The amplifier has a built in display with buttons for functions such as input, volume, and surround, as well as a built in display with buttons for functions such as standby, tuner, and surround. There are EQ controls. The multi purpose 5 channel compact home theater digital stereo receiver box has buttons for audio adjustment. The remote control is for easy distant audio adjustments. Refer to the Technical Specification for User Manual for more information.

Brand: Pyle

👤I would have given this 5 stars, but the inputs gave a bad sound output. I had the same issue with a Chinese unit. I am using this as a media center and the TV/Android TV Box are my only sound sources, so it was an option. The sound is crystal clear. One unit had a remote volume that was down after 1.5 years, but it works fine and feels solid. The remotes are $36 a pop. I used a universal remote that I learned from. You can control the volume settings for surround, center, and main with the remote. You can control bass and treble. All my settings were retained when the system was reset. This is connected to a power strip that shuts everything off when the TV is turned off. I was a little nervous because of the other reviews. Not an issue for what I received. I'm assuming they addressed the issues with later versions or the reviewers received faulty units. I prefer a lower volume setting because I don't want my speakers or THUMP my subs to blast. The unit came with a lot of instructions. It has a low-intensity blue display and doesn't distract when watching movies. It's the perfect size to fit on top of my sub and has rubber feet. I didn't assume something this small could drive an unpowered sub because my powered sub works with the high-pass speaker wires. I am using satellite speakers and a dual cone center channel speaker. The power of this makes it loud for a home theatre system. I don't expect this to work with large stereo speakers, and would cause distortion if you tried to use it as a pre-amp. It's never a good idea to amplify a signal. I would have been angry if I didn't have the option to use the HDMI option. The only thing that the HDMI can do is audio pass-through, it is not a receiver. I have to buy an HDMI splitter as I can't use it to switch between audio sources since I only use HDMI. Both units have issues now. One connects when it wants to and the other doesn't. One unit has issues with HDMI sound, where you have to cycle the inputs when you first start your show, or when you pause your show, or both. Only one source is connected.

👤This product was perfect for the bedroom. If you don't do the homework, you will be disappointed if you buy a surround system with Boom-Box volume. The reviewer who helped me decide to purchase this product was the same one who helped me with my application. I have setup a 27 inch TV in my bedroom with a single HDMI input and a streaming stick. I wanted better sound in my bedroom than my TV could provide. The sound system in the entertainment room was supposed to be louder than the bedroom's. I had spare Bose speakers that I wanted to use for the bedroom TV setup. The amplifier fit my application perfectly. I wired using 16-gauge wire. The two Bose speakers were put into the amplifier, the Roku stick was put into one of the two HDMI inputs, and the other end of the cable was put into the TV. I connected an F-Type female plug wire antenna to the amplifier to use the built-in radio when I'm not watching TV. I have not used the AUX inputs yet. I have been using the above setup for a month and I am very pleased with it. When the volume-dial is set to mid-way, the amplifier can drive the Bose speakers with enough power. I can use the input mode on the stick to stream video. The Bose speakers have better sound quality than the TV speakers. There are no issues with voice not being synchronized. There is a The amplifier's remote control is very easy to use. The instructions are very clear about how to operate the system. The amplifier unit has all the controls on it, as well as the remote. I added a wire antenna to the amplifier to pick up the radio stations. The amplifier has a lot of memory. The amplifier has a feature that works well. I connected my laptop to the amplifier. The Bose speakers had a better sound than the laptop speakers. The connection to my phone was easy to make. The low-cost unit that the Pyle PFA540BT amplifier is built for has a small footprint. It is on my bedroom furniture. I have not configured my bedroom entertainment system for surround sound, but it provides the option of connecting up to five speakers and a sub-woofer. I am very happy with the purchase I made, I chose the correct product for my application.

6. Onkyo TX SR494 Receiver Ultra Dolby

Onkyo TX SR494 Receiver Ultra Dolby

160 watt per channel. 4K/60p and HLG are supported. 5.1.2-ch audio and video. The Virtual:X and the Height Virtualizer are from the same company. The AccuReflex and AccuEQ have subwoofers.

Brand: Onkyo

👤When the PS4 Pro is connected to the TV, the option for 4K RGB is disabled, as you can see in the picture, and the frequencies for HDR are not the max, but when the PS4 Pro is connected directly to the TV. Check the message that says to check the TV settings. If you are going to use it for games, get something else. When I try a game, I get a warning that the game will play at 2K, but I don't see it because the TV isn't the receiver.

👤I have a set up in my home theater that is awesome. 2 front speakers, 2 ceiling pivot speakers, 2 rear surround speakers, 1 center channel, and 1 subwoofer are all expected to be upgraded soon. I've seen a lot of people flaunt their 2 and 3 thousand dollar setup but this receiver does exactly what it is intended to do and I have been buying Onkyo products for years and have not been disappointed yet. It can drive my speakers without being loud, and it can reproduce the sound of the movies in Dolby Atmos. My only regret is that I didn't get a 7. A receiver. I wanted to add 2 more speakers to the theater seating area. Maybe upgrade later. This is a great buy for anyone who wants a good Atmos setup in their home.

👤I had a 13 year old boy. I thought it would be a great upgrade since it supports all of the new sound formats. I was very excited when I got this. The result was disappointing. The sound was flat. The voice was muffled. I re-ran the setup again and the same thing happened. The Audyssey used on my old Onkyo is called AccurEQ. There was a manual setting on my old Onkyo, but it was not possible on this new one. Each time I ran the setup, there was a different one. It has a lot of bells and whistles, but I didn't like the lack of sound quality. I ended up spending over 2x as much as I would have spent on a Yamaha, but I'm very happy with the speaker calibration and the various profiles it offer out of the box, and there's also a graphical manual EQ. I didn't like this receiver. I wasn't happy with the sound quality.

👤Unless you have a lot of devices, this is all you need. I replaced an older unit with this one. The older unit had all the inputs that were never put to use. This is perfect for 4 devices. The sound quality from this unit is perfect once you start using it. It's better than the best movie theaters. The sound quality of the audio is not as good as it could be. The sound is the same as you get from the high end Onkyo units, even though it has the same 32 bit sound processor. I only use it for the two gaming consoles. I don't play music in the house. If you are looking for a high quality home theater sound system that is only going to be used as a home theater system with 4 or 5 devices, this is it. If your TV can pass HD sound, you will be able to hook up 5, 6 or 7 devices to this, depending on your TV's inputs. It does work very well with 4K upscaling. The HDMI pass through works perfectly, but the features are not real. The problem is that the standard is too new and not standard, so there are device conflicts. This is a great unit for anyone who doesn't have a lot of audio devices. Who does now?

7. Sony STRDH590 Multi Channel Receiver Bluetooth

Sony STRDH590 Multi Channel Receiver Bluetooth

You can enjoy your favorite movies, TV shows and more in the comfort of your home with Cinematic Sound at Home. S Force PRO delivers virtual surround sound with only a 2 speaker setup. You can use your phone to stream music and use a Standby turn on the receiver. A multi function system includes a multi channel stereo setup, a radio tuner and a headphone jack. There are 4 stereo Rca audio inputs and 2 digital audio outputs. In the box is a microphone, remote control, batteries, and a wire antenna. Also, note: Installation Manual and User Guide can be found in the catalog. Also, note: Installation Manual and User Guide can be found in the catalog.

Brand: Sony

👤I never leave a bad review, but this receiver did not allow for the full experience of the game. If I plugged my TV into my XBOX One X, it would be capable of playing both video and gaming. The build quality is good, but the lack of AUX-in was disappointing. I picked up the Yamaha after returning the Sony. It's $50 cheaper, has tons of more features, and has an AUX-in feature that I've wanted for years, and it passes the tests of both Dolby Vision and HDR10 correctly. Pick up the Yamaha, you'll be happy you did.

👤I put together a simple 5.1 surround system in my small den based on a Yamaha amplifier that started to go a little weird - it would turn itself on and off, sometimes wouldn't allow volume control from a remote, and sometimes wouldn't have picture resolution dropped. The sound was pretty decent. I decided to swap out the amplifier for the Sony one. Wow, what a change! It was easy to set up and calibrate. The sound stage is very detailed. It makes my speakers sparkle with clarity and crispness. I'm not a snob and my ears can still see a huge improvement in movie watching at a cheaper price. You will like this amplifier.

👤Great inputs. Good power. 60hz pass through. The enhanced HDMI option can be enabled. Arc control. I like it. The surround left channel is dead. The receiver died not even two years after the event. I'm disappointed, and that's coming from a Sony fan. My last receiver was from Sony. This was brought down from 5 stars to 2 by me. I think I'm buying a Denon.

👤I have an old entertainment system with a center and surround set that I use this unit to drive. The unit sounds good even with questionable speakers. I listen to my music on my phone. I use it. I know that makes many people cringe. I used the automatic calibration to set this up. Mozart's 25th was put on by selected music surround. My wife could hear how much better this setup was. Everything was in balance. It had a rich sound and clear highs. The surround did not sound fake. It was like sitting in an orchestra pit. It sounded great to have DVDs and cable TV. I can't hear the voices. The Movie HD-Digit setting is clear and easy to understand. There is a night mode that makes it easier to understand voices. The unit works great out of the box. It is powerful enough for a small home office, and I have it set up there. If you want to annoy the neighbors, you might need a bigger unit. I am very pleased with this purchase, and I love it.

👤Sony got it right. The receiver has 4K and HDR pass-through. The inputs are 2.2 compliant. It is easy to set up. The power is at 145W per channel. It will expand to 5.1 soon if you hook it up to a couple BIC tower speakers and a Dayton Subwoofer. There is no rush because the Front Surround feature really makes 2.1 sound like real surround. I couldn't be more happy with my purchase because it's heavy and built like a tank so it should last. The seller was praised for ordering on Monday and being delivered on Wednesday.

8. Pioneer VSX 534 5 2 Ch Virtual Bluetooth

Pioneer VSX 534 5 2 Ch Virtual Bluetooth

There is a playback in the movie. The next-generation audio codec from DTS is called Dolby Atmos and it uses object-based audio to enable new interactive audio experiences. Bluetooth is a company. You can connect your phone, PC, or tablet to the receiver with the help of the technology. Whenever the smart receiver sees an incoming audio stream, it starts playing. DOLBY ATMOS. Without using additional surround or height speakers, the virtual surround and height effect can be created. 5.1.2ch. The personal preset. Press the personal preset button on the front panel for three seconds to change your settings. Up to three preset can be called up from the front panel button or remote control. RANGE CONTROL. You can use the up/down key on the remote control to make independent volume adjustments to the range, including dialogues in films, with this unique mid-range sound control feature.

Brand: Pioneer

👤I have a VSX-1130 in my living room and I really like it. I wanted to buy one for my basement, but didn't want to spend a lot. The price is 3 times the price of the 1130 I can't tell the difference in sound. The 1130 has bells and whistles, but the 534 is light and easy to set up. What else would you like? The sound from the 534 blew away the old Onkyo I replaced. Very happy. I would have gotten the 534 instead of the 1130 if I could do it over. Very happy. I replaced my old receiver with a cheaper one in my living room. It sounds better. Still very happy with it.

👤This is a fine piece of equipment if you don't need to use the HDMI connection to your TV. I needed the ARC capability when I bought this to use with my new TV. When the receiver is turned off, the signal will pass through. Problems exist with it on or off. I have a satellite input to the receiver and the ARC connected to it. There is an audio delay when you pause a tv show and start again. When you channel surf or change channels, the output to the tv becomes scrambled and you will lose the output altogether. I had to stop using the tv receiver because it was so bad. It took me a while to realize that the problem was the AV receiver and that I should have connected the tv directly to the satellite box. I missed the 30 day return so I'm stuck with the problem.

👤If you have small space, you're a great receiver. I own a huge Pioneer VSX that is twice the size and weight of the 534. If it's too big to fit in a cabinet. If there is plenty of power and features, a smaller surround can fit anywhere. Unless you wire the unit to the TV to complete setup, you cannot get out of setup mode. I didn't want to use the receiver to run my TV. I only wanted to use an optical connection. I had to run the TV, DVD and Echo through the receiver after the TV prompt. The main front speaker connection allows for 14 gauge wire while the center and back channels speaker ins only allow 16 gauge wire.

👤I wanted to test this receiver out for a while before I submitted a review. I'm very happy with this Pioneer. This was a great upgrade to my old Kenwood 5.1, which did not support the new DTS, and which was replaced by a slightly newer Yamaha that bit the dust after a power surge. I don't like to listen to music but I do like the fact that a receiver can belt out music and a picture with no distortion. The receiver delivers on both fronts. Older and newer CDs are clear. The dialog is clear while the movies boom through my subs. I wish they put a second slot on the front of the device for quicker, more convenient firmware updates and simple mp3 players. Follow the instructions carefully. The website gives more information on the steps, but they require you to turn off HDMI. If you need a receiver in a pinch, this Pioneer is worth the money because it is well worth the money. I put a couple of AC fans on top of the receiver to keep it cool. The previous Yamaha I owned was so hot I could fry an egg. I'm not taking any chances with this one. This application is where the receiver shines, because I bought an Lg UBK80 4k player. The sound of Ex Machina was amazing, with clear dialogue and booming lows of the soundtrack. The explosions boomed when I watched the 4k version of Aquaman. When the Atlanteans shot off in the ocean, my room shook. I am using a Sony sub and a Yamaha sub with Bose surround sound. The receiver made everything shine. For the first time, I could tell that I had surround speakers.

9. Moukey Bluetooth Power Amplifier System

Moukey Bluetooth Power Amplifier System

There are EQ controls. The sound amplification device has buttons for the audio sources, the mic and the master volume. A remote control is included in the package. The power of Watspee power is 220. The dual-pass Moukey stereo amplifier receiver is perfect for karaoke, home theater, acoustic sound system, and monitor headphones. Provide you with enough powerful power amplification, which can accommodate 2 sets of speakers, so that you can enjoy the home audio impact of high-quality audio amplification. Bluetooth is a wireless connection. The sound amplification mixer device has a range of up to 40 feet. The stereo amplifer is compatible with all of the latest devices. There are partition and partition modes. External signal sources are supported by the digital amplifier box. 2 audio inputs for a VCR, CD player, tape drive, two microphone inputs, a headphone output port, and a 3.5mm AUX IN radio antenna. Two pairs of banana plug speaker output are supplied with the RCA audio output. You can enjoy audio all the time with the special monitor headphone output design. Balance control is easy. The professional compact bookshelf sound amplifier has buttons for mode control. The microphone echo / volume, balance, bass, treble, master volume, input source and unique folder / track are controlled by knobs. The screen is high definition. The integrated receiver has a front panel audio control center. The stereo amplifier package has an antenna and remote control.

Brand: Moukey

👤This piece of gear is amazing. The sound is excellent and it can manage an incredible number of sound sources. I'm a tinkerer, so after spending most of the first day of ownership connecting, reconnecting, jiggering, testing out, and sometimes cursing, I'm sitting at my laptop listening to a vinyl record of Mozart's Clarinet Chamber Music. The experts on this site have said that neither of these things could be done, but how to do it is another question. I'm doing it right now. This is how it is done. You know the tricks. It was a really easy one. The included antenna isn't the best. The one they sent me is not. 40 signals were found by the automatic station finder, but the closest one and the one I like to listen to have static, no matter how I position the wire antenna. I connected the FM input on the back of the MouKey to a cable outlet in the wall during my tinkering. I used the same type of cable connection that you use to connect your router to your cable feed. I now have 65 stations from all over the country. Another easy job is the turntable. I have a turntable that gives me a choice of using pre-amp or unamplified output. The MouKey is an amplifier, so you want to use unamplified output. If you have a turntable that has a RCA connection, you can plug it into the DVDRCA receptacle in the back of the MouKey. If you don't have a jack to connect the cord to the rcs, you can turn it into one you can use. You may need a short one that has two female ends. If you haven't already, connect your speakers. I have the amplifier connected to 8 and the DVD RCA connections to the right. The Bose ceiling speakers are Bose. They sound great. I haven't connected the speakers to the amplifier with the wire connections. I probably won't. If you want to be adventurous, read the rest of this. It can be done if you want to send music from a radio to another device, or if you want to connect other things via the same method. Read on. Make sure that the headphones on the left side of the MouKey are not plugged into the jacks on the right side. You don't want to do that at the moment. It's time to buy a transmitter. I don't think it has to be expensive. It depends on how much you listen to music. I have an inexpensive square transmitter/ receiver that is very, very touchy, and if it works, anything you buy will probably be better than what I have. The cheap little thing sounds bad. The more work it takes to connect, the more valuable it is. It is cheap and hard. Up to a point. I don't think so. Okay. Plug one end of the cord into the female headphone receptacle on the lower front of the MouKey. Push it all the way in. You need to connect the other end to your transmitter. Turn the power off. If you don't do this, your headphones, or whatever, won't connect to the wireless receiver of the MouKey or to your speakers or some other device, which will sabotage your project. Turn off any devices that are interfering with my check and then use my phone to check. There are some apps on the Play store that can find out what's going on with the devices. Everything off? Do whatever it takes to connect your transmitter to your receiver. This is where my cheap transmitter and headphones argue. The power on the MouKey will be turned on when they are connected. You can set the input selector to whatever you want. If you haven't already done so, turn on the source. My turntable is on, so I can listen to Mozart while pointing at the DVD. I don't think that is important, the little display shows our local NPR station. What you have chosen is what's transmitted. You are listening to sound that is gibberish from your MouKey. Is that really cool? Your speakers or headphones are picking up a signal from your external wireless device that's connected to the headphone jack of your amplifier that's connected to your sound source via theRCA jack on the back, and you're also sending that signal to your external wireless device that's connected The receiver is not being used. Hmm. You can now use your headphones or speakers to listen to another sound source, even if you don't own a phone, because you can connect your phone to the unused receiver. You could connect your speakers or headphones directly to this device, but what's the fun in that? You wouldn't hear the sound of the MouKey. Set your key so the display reads "Blue." In my case, it happened immediately and made me want to replace my cheap transmitter. If you want your phone to transmit to your MouKey, you have to turn on your Input Selector on the right side of the MouKey. You can download the Radio-FM Radio Station App for free. The Local Radio Free app is available for download. Your phone will allow you to listen to crystal clear radio all over the world. I think there are many stations. Send your station's output to the MouKey receiver and it will let you listen to music from all over the world. Enjoy.

10. Denon AVR S750H Receiver Channel 165W

Denon AVR S750H Receiver Channel 165W

Enhanced realism and new features are available. You will think it's happening right above you when you hear the sound of a helicopter or rain. This 7.2 Ch stereo receiver is a must have for your new 4K Ultra HD TV. It features HLG, HDR10, Wide Color Gamut, and 4:4:4 Pure Color sub-sampling, and it gives you exceptional clarity and color. You can extend the reach of your music to any room in the house with HEOS multi-room wireless speakers. Extra hardware is not required. You can get hi-fi sound around your home with a variety of services. With AMAZON ALEXA, you can enjoy music without having to reach for the remote. Change the track, adjust the volume, or switch the inputs hands-free. An award-winning on-screen setup assistant will walk you through simple instructions to connect your TV and help you maximize your surround sound. Denon's legacy and Japanese precision technology makes it a must-have. All of the HDMI ports are compatible with the earlier versions of HDCP. HDCP 2.2 will work perfectly on your devices. The Audyssey Suite is a system that measures and adjusts speakers in your home theater for all listening levels. No muffled dialogues or sudden blasts anymore.

Brand: Denon

👤I hope this is the last update. The unit returned after not being fixed. Problem got worse. I wanted a replacement. I gave this after I shipped the faulty unit back. They gave me a refurbished unit that had a single year warranty. I wanted this. I finally have a unit that works two months after the start of the warranty issue. This is a six-month update. The unit is being repaired. Couldn't get to Denon. They don't respond to e-mail and they don't answer the phone. I am thankful that I found Panurgy. I want to change the title of the post to "inferior product". Don't waste your money on this company. The Denon of old is no longer there. I'm. A Denon owner for over a decade. The product is superb. It's easy to set it up, it's much easier to use than my older model. Customer Service should not be tried: they have outsourced it to the Pacific Rim. There are two No one answers their Customer Service questions. You might hear within 3 days if you take the option to call back. You have to use the 2 antennas for best use on this model. Something inside broke when I was rotating mine for the first time. It's a part that screws on. I was told that I had to contact my internet service provider for a new antenna. I gave her the part number, but she didn't know the AVR had two of them. Denon's Customer Service has been driven from World Class to (???)... I don't know what to call it.

👤I had it for 4 months. One day, I woke up to an update error. The unit was bricked. I would think that a new one would be sent out and the old one would be returned. Nope. You wait for it to be repaired and send it off. I won't buy another denon product.

👤Since purchasing this product, we have had trouble. Customer service is so bad that it is almost impossible to fix something when it works. If you pay a fee to ship it to them, they will fix it. Another issue will arise when they send it back. You can save money and time by looking for a better product.

👤The reviews here are of mixed unit model numbers and even some refurbished items. The s750H is great. Top notch. For over 30 years, I have been a big audio and home theatre user. I wish it had a back-lit remote. We are coming from a 6 year old Yamaha that has full HD and this Denon unit that is hands down the biggest upgrade in every single area. I'm completely satisfied and amazed. "Be careful when reading the reviews of the model numbers." The 750 is solid and has a lot of features. You can't go wrong with the new 48g cables.

👤The device doesn't turn on after 7 months. I have to pay for the entire repair shipment. It costs 50% of the total cost to ship it. This is ridiculous. The device was handled with care. Will not recommend it.

11. Bluetooth Home Audio Amplifier System

Bluetooth Home Audio Amplifier System

Powerful 750 watt motor. The 750 watt peak power of the 6 channel home audio amplifier can be used for multi speakers and allows you to enjoy high quality audio. It's perfect for your home theater entertainment. Bluetooth capital is available. The personal portable digital amplifier box is compatible with today's latest devices including laptops, tablets, and phones, as it is equipped with a hassle-free receiver. There are multiple intrusions. The integrated indoor stereo receiver has a built-in FM radio with a digital display and audio input. Also has 2 14” microphone inputs. There is a talk-over function. The professional sound amplification device has a MIC talk-over function which will temporarily stop the current music or audio being played. This function is used in announcements. Integrated equity: The amplifier has buttons for the audio sources, a knob for mic and master volume, and a button for the selectors. A remote control is included in the package.

Brand: Pyle

👤The volume knobs are difficult to use. It takes quite a while before the sound comes out, and it's almost impossible to find the volume that I want, because the volume starts increasing so fast. The knob changes the volume very little when it gets to a certain level. The instructions are not any better than the remote. Trying to figure out how everything works. The included FM antenna isn't good at all, and there are no external antenna hookups. There is no timer shut-off function. I've been unable to get the features to work. There is a The user manual is poorly translated and offers little information beyond restating the unit's features and no guidance as to how to manipulate them. The ability to select inputs on the display with the buttons or the remote does not play well together. I can't change inputs without adjusting them. The remote only works to turn the volume off when listening to the radio and not AUX, and only when listening to the radio and not AUX. The remote volume increment is wildly inconsistent. Sometimes there is an increase of one increment and no change, and sometimes there is a big change with Dash going from volume to two volume. There is little to no control over this piece of junk unit, it is loud and not subtle. The local stations must've been scanned and saved by the radio station, which is good, but after a while of trying to figure out how to set the preset, it's difficult to pick up. I only added preset of static. There is no service for customers. Customer service is not poor.

👤I like the receiver. I've been looking for a compact multi-channel stereo amplifier for years that will fit into a shallow cabinet in my hallway and allow separate speaker zone control with ease. I like the separate volume controls for each channel. I have a shop with one channel running speakers, another running speakers on my patio, and a fourth running speakers in my living room, but I will eventually use another channel to run speakers in my kitchen and possibly a pair in my living room. It was easy to setup. I have had some issues with the unit, but it probably has more to do with my phone than it does. There are only two suggestions to improve this unit. The location of the sub-woofer outputs on the back of the jack is indicated in the instructions, but they don't give any details about them. I don't know if the sub-woofer outputs us dedicated to a specific channel or if it is shared across all six channels. Adding an explanation to the User Manual would be great. I have limited range when using the connection. I know that the problem is mostly due to my placement of the amplifier within a cabinet and the fact that there is an exterior wall between my phone and the amplifier. The extendable antenna is basic and functional, but it doesn't seem to be something that could be upgraded. It would be nice if the antenna on future product versions were removed and replaced with an upgraded or powered/amplified antenna, like the way they can be in a wireless device. I'm satisfied with the product and look forward to using it. If anyone is interested, I will update this post with my findings once I find the time to connect a sub-woofer. When I have my patio speakers running on Channel A, the sub-woofer I have connected in my shop is playing even though the shop speakers on Channel B are turned all the way. The design is not the best, but it's still a great unit.


What is the best product for home theater receiver 5.1 alexa?

Home theater receiver 5.1 alexa products from Denon. In this article about home theater receiver 5.1 alexa you can see why people choose the product. Sony and Yamaha are also good brands to look for when you are finding home theater receiver 5.1 alexa.

What are the best brands for home theater receiver 5.1 alexa?

Denon, Sony and Yamaha are some of the best brands that chosen by people for home theater receiver 5.1 alexa. Find the detail in this article. Pyle, Onkyo and Pioneer are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to