Best Home Theater Wall Plate 5.1

Plate 20 Aug 2022 10+ Comments Open

1. Fosmon HD8006 Surround Distribution Subwoofer

Fosmon HD8006 Surround Distribution Subwoofer

Conceal cables behind the wall in your media room for a professional looking installation and include a lifetime warranty for peace of mind. The Fosmon 3-Gang 7.1 surround sound distribution wall plate is compatible with 4K@60Hz. The high-speed connecting devices are made of gold. The wall plate has a gold plated connection. The HDMI wall plate from Fosmon is a clean connection point for your audio/visual equipment. hiding cables in your walls is a way to remove cable clutter. All of your sound is included. This wall plate can be used to set up a surround sound system. Banana jacks don't work with dual banana plugs. Only works with banana plugs.

Brand: Fosmon

👤The plate was straight to the point and made my home theatre connections so easy to manage that I can just plug the receiver into the jacks. Behind the wall, cable management is done. I can't speak for the quality of the HDMI ports because I used this opening for a 6-port Keystone plate which I then used for the CAT6a network ports. I only mention it because there is a use case for someone to swap the included HDMI ports for something else that works better in their situation. As long as you have a standard Keystone plate, this can be done. A different plate can be installed just as quickly. The reason I removed a star from the review was because the jacks on the item were not good. After installing everything and mounting it to the wall, I was hit with a constant bass signal coming out of my woofer. I knew it wasn't coming from a specific source since my receiver was off. I removed the wall plate and found that the jack on the inside had broken and the plastic plug had been pushed through to the back. The signal pin was shorting the cable because of this. I moved the cable to the second jack and it broke the first one. I decided not to return the plate because I had some extra keystones and jacks that I just removed and put in this wall plate. There were no more breaking issues after that. If you buy this product, keep an eye on the sub jacks as the plastic looked brittle and could break over time.

👤3 of these were ordered. Two of the three have bad HDMI connections. I tried different cables and tried another outlet. After all of the work, I returned what I thought were faulty cables, but only one of my three actually function. I am going to swap the HDMI gang outlet for another brand because the speaker connections work on all three of them. A lot of work, a lot of problems, and a lot of wasted time. 1/3 of my order price was returned by the company because the gang outlet didn't work. I would try them again in the future. The stars were from 2 to 5. Customer support is great.

👤I like the fact that I can get a 7.2 wiring into one location. I don't need the HDMI because I wouldn't be using it in the walls. The option to include another four-set of post for the plate would be better. I was able to find an insert with eight posts and swap out the HDMI insert for it. This is a nice plate if I only did 7.2.

👤The wall plate cleaned up my cables. The wires and cables were fished out of my walls and put into a cabinet. I could have just bought a wall plate with a large hole in it to save a few bucks but the plate really adds that extra touch making it look very professional. The 6.1 configuration includes the Front Left, Front Right, Center, Surround Left, and Sub Woofer. You can also hook up 2 cables. The left, center, and right panel are released by the 6 screws on the wall plate. The front plate will be put back on after the panels are screwed to the low voltage 3 gang brackets. I used the PROS clean plate from the 3 gang low voltage brackets. The plugs glide in smoothly and are high quality. There is a The HDMI port supports both audio and video. The banana posts were loose upon arrival. It was easy to fix with a pair of pliers.

2. TNP Theater Speaker Plate Outlet

TNP Theater Speaker Plate Outlet

It's an ideal addition for your home theater speaker wiring setup that works with audio players that support 3 surround sound speaker setup. The wall mounted wire connection is for five speakers. The decora style white with gold plated copper and colorcoded speaker banana plug terminals have high amperage and high watt capabilities. Any standard 1 gang box is fit. The banana binding jack plug post and the gold plated brass connection are made from high quality brass and are resistant to oxidation. It is designed to be used with banana plugs, spades or bare wire. Banana plugs are easy to install and remove and have a 3/4" spacing. The mess of wire strung along your baseboards is eliminated by wall plates.

Brand: Tnp Products

👤Do not buy them. They are very low quality. The wires can fall out of the loose fitting rings. They strip if you try to make it snug. If a wire is loose behind the plate, you will short out your amplifier. These are the lowest quality items I have ever gotten from Amazon.

👤The ugly hole in the wall was turned into a wall plate. If your wall box does not have a place to screw in the middle plate, you will need to glue the inner plate to the outer plate. This is easy to do. Put glue on the opening between the inner and outer plates and hold it there for an hour with a spring. It is one solid plate. Bandanna plugs or bare wires are used in the inner plugs. The plugs are the same. Looks great. It works well.

👤The product is sturdy. Looks great. Banana plugs fit on the front side and on the back side. You will need a low voltage bracket if you want to mount in the drywall.

👤The threading was poor. I used banana plugs as a result. Too much of a PITA can return.

👤I am happy with the purchase. Quality is solid and the price is good. If I needed the same product, I would buy again. I received the item quickly.

👤You can't double it up because it's not a standard size and you have to use the faceplates that come with it.

👤Attaching banana clips to either side was easy.

👤The product is suited for 3 devices.

👤The quality of these is not the best, some of the threads were stripped, making it hard to secure the cables. It wasn't the best experience to push the wire between the stud and the nut.

👤It has a finished look. There are secured hook up connections. The price is reasonable.

3. Fosmon Five Speaker Theater Plate

Fosmon Five Speaker Theater Plate

A high quality gold plated copper connection is built with Remium built. It is easy to install and remove with no special tools required. There is a color code. Matching binding posts on the front and back. Standard size single gang boxes are not included. Also, note: The cover plate has a larger opening area and can only be used with the wall plate. A clean and tidy installation can be achieved by eliminating the mess of wiring along the baseboards.

Brand: Fosmon

👤I was thrilled to find a 5-pair faceplate that fits in a single gang. It is not deep enough and it is badly designed. At first glance, it looks like a banana plug in the front and a jack in the back. If you attach banana plugs to your in-wall wires, you can plug them into the back side of the jack, instead of trying to squeeze 10 wires into hard to reach side-holes without shorts. No chance. I discovered that if you put banana jacks into the back, they won't fit into the front because they were made too short. What a stupid design.

👤Do you want to remove this from the wall plate it came with? Maybe put it in an existing dual gang wall plate. Not going to happen. If you are going to make something like a wall plate connection panel, make sure it is compatible with all the other products on the market. I have never seen this incompatibility before with these brands. There are problems with fitting banana jacks due to the spacing, but I didn't get that far. It's not an acceptable or sensible approach by the manufacturer.

👤Here's the thing. If you're going to charge twice as much as Monoprice, you might try to raise the quality of what you sell. The barrels of these jacks are very thin. The edges of the barrels are left sharp. It's sure to cause a lot of trouble when they tighten them on bare wire. What more could anyone want than a few strands of severed wire straddling the posts and shorting your amplifier or receiver? If you're going to use "flex tips", you should buy a spare set because they won't last long. My advice? If you're buying more than one, go to Monoprice. The shipping will be covered by the difference in price.

👤The product is well-made. There is a standard horizontal spacing for dual banana plugs. Banana plugs are needed to be sure there is no contact between rows of terminals. The opening of the plate is not standard Decora. This was a problem for me when I wanted a double gang face plate. My hack was to cut off one edge on the face plates and join them together with a sliding compound. This worked well. Just score the plates with the power saw, then cut them all the way with a hack saw, and finish with a file. If you cut all the way with the power saw, you'll break the plate.

👤I needed this product to run wires through a wall. I was able to do it with only two gangs because of the four speaker single gang adapters that I had. There is one note for the person who is installing. The cover plate opening is longer than the standard two and a half inch. If you install this in a multi gang outlet box with multi gang cover plate, it mounts perfectly. You will need to use the cover plate that comes with this one as a template to cut the opening in the multi gang cover plate.

4. Monoprice 2 Gang Surround Sound Distribution

Monoprice 2 Gang Surround Sound Distribution

There are gold binding posts and jacks. The package is 12.446 cm long. The package is 12.953 cm in width. The package is 2.794 cm high.

Brand: Monoprice

👤I returned a used 7.2 2-gang Monoprice plate because I thought it was bad, but I now believe it was not broken. The 7.2 is different after looking at photos of different wall plates. It has little buttons that you can depress to insert the wires. There is a mechanism that prevents the use of banana plugs. The monoprice ones are not firmly held. The barrel is much larger than a banana plug. I believe that the 7.2 is not designed for banana plugs. Someone else returned the used one that I got. I wanted a product that was compatible with banana plugs, but it didn't seem to be this one. This review does not apply to the 5.1 and 8.2 products because they show different terminals. Is 1-star a warning? They did not understand the products they sell. They told me that it would work with the plugs after I spoke with them. If you were hooking a bare speaker wire into both sides of this, it was easy, as the springs were firm and there was plenty of room for 12ga wire. The description should be different and this should be a separate item.

👤I am a huge fan of mono price cables. They have always been my first stop for cheap cables. I thought I would try some of their equipment, however I found it to be cheap Chinese stuff. The banana plugs screws were stripped at the factory to make them look like low quality. I can see the paint on the metal they are supposed to give it the sheen of gold, however it doesn't look like any of the other gold plated cable items that I have.

👤I have used plates from Dayton Audio, which I really like, and from Parts Express, which has some limitations, but also nice features. If you don't need to go with top of the line components, these work just fine. The posts are simple 4mm wire on both sides, but using spades might be a challenge due to the density of posts. I used a piece of copper tape and a piece of direct connected wire in the back and front of the project. I changed the orientation of the post hole by removing the nut in the back of the posts. The plastic plate with the posts has a good amount of play room for mounting which is really appreciated when using with other face plates. I have seen cheap plates with imprinted lettering, but it does not appear that it will rub off anytime soon. I prefer a screwed in F connection in the back of the wall plug-in, and I would have liked more if the subwoofer post wereRCA in front. Again, personal preference and there's probably just as many people that don't like the post as they do. If I want to get the Dayton's, I'll have a screwdriver notch in the thumb screws. I'm giving it 4 stars, not that I'm subtracting a star for any specific reason, but just "I like it" and would buy again if I needed an inexpensive plate.

5. Cmple Speaker Surround Distribution 2 Gang

Cmple Speaker Surround Distribution 2 Gang

The 5.1 speaker wall pillow is ideal for your home theater speaker wiring setup and works with audio players that support 5.1 surround sound speaker setup. The box is standard 2 gang. A wall mounted wire connection for five speakers is included with the stereo amplifier stereo system. It is easy to install. The front plate has dedicated labeling. Use with banana plugs. Up to 5 speakers and a sub can be connected. High quality. The binding posts are gold- plated and resistant to rust. The banana plug terminals have high amperage and high wattage capabilities. The package includes a speaker wallplate. Includes mounting screws.

Brand: Cmple

👤I was expecting this to fit a standard wall plate and I was going to use it with my Dolby Atmos setup that has 11 wired speakers and 4 speakers in different zones in the houses. I had to come up with something. I bought 3 of these to have 15 plugs for my speakers and one passthrough brush for the cords. I tried to fit this with a standard 4 gang wall plate but it was not possible because of the extra plastic. I spent an hour grinding down the plastic on the face plate and got it to work. I would expect it to fit a standard wall plate.

👤Speaker wires are no longer poking out of the wall. There are no silly doctored faceplates anymore. I have all of my speakers wired in the wall, which is easy to install and move around. It took me 50 years to figure out the value of spending a few dollars to properly install and organize all of my entertainment systems cables, and now that I've done it, it's hard to believe how easy it was. A few minutes of up front work have replaced hours of wasted time trying to make sure I don't accidentally cross wires, because my system is cleaner, professionally installed, and a few minutes of up front work have replaced a few minutes of up front work. I would highly recommend this box to anyone installing an entertainment system.

👤I have an electrical wall box and 5 ceiling speakers. The plate allowed me to quickly connect the A/V receiver with a cable with banana plugs. It is easy to remove the banana cable from the A/V receiver when the electronics cabinet is moved. It took a while to install. I needed longer mounting screws for the electrical box because it was set back an inch. The speakers had cables that had banana plugs. The banana jacks on this plate allow banana plugs without interference, which was better than expected.

👤The binding posts on the back side were stripped out while trying to tighten things up. The engagement of the thread is poor. It's working for now. I'm going to replace it because I can't trust it. The sticker says "made in China" and it's not listed as aUL. Use this at your own risk. I used the ICC brand for everything else, but they don't make a three pair version. I'll buy their four pair version and just have one unused pair, which drives my OCD nuts. My connections are falling apart inside the wall, but it's better than that.

👤I have a media closet with surround sound speakers in it. Extra speaker wires come into the media closet because the tv can go on two different walls. I ordered two if these and put them in because I couldn't stand the mess of wires there. They seem to be well built, the finishes are good, and the terminals screw down tight. It can accept either bare wire or the banana jack style. I stuck the ends of the wire in the holes and tightened the screws. It worked well.

6. Fosmon Surround Distribution Speakers Subwoofers

Fosmon Surround Distribution Speakers Subwoofers

Plug and play connections, 3.5 MM aux to a wire. The 3-Gang 7.2 surround sound distribution wall plate is compatible with 4K@60Hz and supports HDMI 2.0. The high-speed connecting devices are made of gold. The wall plate has a gold plated connection. The HDMI wall plate from Fosmon is a clean connection point for your audio/visual equipment. hiding cables in your walls is a way to remove cable clutter. All of your sound is included. This wall plate can be used to set up a surround sound system. This product has a limited lifetime warranty. Refer to the website for more information.

Brand: Fosmon

👤The plate was straight to the point and made my home theatre connections so easy to manage that I can just plug the receiver into the jacks. Behind the wall, cable management is done. I can't speak for the quality of the HDMI ports because I used this opening for a 6-port Keystone plate which I then used for the CAT6a network ports. I only mention it because there is a use case for someone to swap the included HDMI ports for something else that works better in their situation. As long as you have a standard Keystone plate, this can be done. A different plate can be installed just as quickly. The reason I removed a star from the review was because the jacks on the item were not good. After installing everything and mounting it to the wall, I was hit with a constant bass signal coming out of my woofer. I knew it wasn't coming from a specific source since my receiver was off. I removed the wall plate and found that the jack on the inside had broken and the plastic plug had been pushed through to the back. The signal pin was shorting the cable because of this. I moved the cable to the second jack and it broke the first one. I decided not to return the plate because I had some extra keystones and jacks that I just removed and put in this wall plate. There were no more breaking issues after that. If you buy this product, keep an eye on the sub jacks as the plastic looked brittle and could break over time.

👤3 of these were ordered. Two of the three have bad HDMI connections. I tried different cables and tried another outlet. After all of the work, I returned what I thought were faulty cables, but only one of my three actually function. I am going to swap the HDMI gang outlet for another brand because the speaker connections work on all three of them. A lot of work, a lot of problems, and a lot of wasted time. 1/3 of my order price was returned by the company because the gang outlet didn't work. I would try them again in the future. The stars were from 2 to 5. Customer support is great.

👤I like the fact that I can get a 7.2 wiring into one location. I don't need the HDMI because I wouldn't be using it in the walls. The option to include another four-set of post for the plate would be better. I was able to find an insert with eight posts and swap out the HDMI insert for it. This is a nice plate if I only did 7.2.

👤The wall plate cleaned up my cables. The wires and cables were fished out of my walls and put into a cabinet. I could have just bought a wall plate with a large hole in it to save a few bucks but the plate really adds that extra touch making it look very professional. The 6.1 configuration includes the Front Left, Front Right, Center, Surround Left, and Sub Woofer. You can also hook up 2 cables. The left, center, and right panel are released by the 6 screws on the wall plate. The front plate will be put back on after the panels are screwed to the low voltage 3 gang brackets. I used the PROS clean plate from the 3 gang low voltage brackets. The plugs glide in smoothly and are high quality. There is a The HDMI port supports both audio and video. The banana posts were loose upon arrival. It was easy to fix with a pair of pliers.

7. DiyTech Subwoofer Supports Configurations Screwless

DiyTech Subwoofer Supports Configurations Screwless

Their speaker keystone wall plate connectors are much easier to use than a banana plug wall plate and can support up to 5 surround sound speaker setups. It accepts up to 12 gauge speaker wire. One (1) Rca Subwoofer Ports is all about the boom. Premium speaker wall plates come standard with one premium RCA subwoofer port. You can connect your surround sound receiver and sub using the RCA port. You can get up and running quickly with their quality low voltage mounting bracket. A home theater wall plate will save you time and money. Their decora speaker wall plate is built to last for years of worry-free use and is stunningly beautiful. The hidden screw hardware is easy to install and gives you a professional look. The speaker plate is highly rated. They deliver the best to their customers. You can see and feel the quality of the keystone speaker wall plate. Only the best audio wall plate is delivered to their customers.

Brand: Diytech

👤It wasn't fun to install. It's difficult to get wires to fit. The item is good for the price.

👤It is perfect for what we are doing. Thanks for the great price.

👤The works as advertised, but they don't snap in easy.

👤It was very easy to install.

👤It looks great and works perfectly.

👤It was necessary for a surround system installation.

👤Fantastic product. Came as described. It is very easy to install and has a great look to it.

8. Legrand HT2103WHV1 Home Theater Connection

Legrand HT2103WHV1 Home Theater Connection

Excess cable can be stored in-wall and there is slack for convenient access to the back of the TV. The media center can be moved closer to the wall. A 125V receptacle is included. The cable access strap is easy to use. The total outlet is 2. The easy extension of electrical wiring is supported by the other products in the family.

Brand: Legrand

👤There are wires behind my TV. I wanted something that was durable, usable, and good looking. I like that the unit is not square so that furniture can be closer to the wall. Since the three main ports are decora, they can be changed out to be whatever you want. You can change the location of the power outlet. The mechanism for holding the unit on the wall is good. I've taken it off a few times and I haven't had any issues with it. I put a piece of lath at the top and bottom of the hole so that I wouldn't damage the drywall if I tightened the screws too tight. That makes for a good installation. The brush insert was the only thing I kept. I added a keystone plate instead of an outlet and replaced the screw-back speaker plates with ones that have more terminals. I replaced the silver screws with white ones. I'm very happy with this unit, even though I only used the shell. It is holding up a lot of hardware.

👤This uses standard Decora inserts. To get the connections I wanted, I swapped my own keystone plates in. If you need to get more cables to your TV, there's an additional knockout on the top. I like that it allows me to expand in the future. I wish it had the brush. There is a The bad? The screws are made of silver. It's not a big deal if your TV is in front of it, but it looks cheap to have metal screws. The outlet box for power is an old style one that you can find at big box stores. I expected a more elegant solution. It did the job and was easy to hook up. I didn't know how it would fit in a wall. It's your wall, but it should fit.

👤I took the opportunity to run my surround and subwoofer wiring under the house while I was remodeling it, and this box fit the bill. The box is easy to install and can be tailored to your liking. I replaced that section with a Legrand On-Q decora 4-port keystone plate because I didn't need the front speakers. I ran a patch cord up to the TV and hardwired the receiver and PS3 to the other ports.

👤We hired a professional to hang the tv and hang the wall mount. The outlet has a lot of plugs and space. The TV is flush on the wall. Exactly what we wanted.

👤It's a good way to clean up the installation.

👤Excited to install. The product seems to fit my needs. Thank you.

👤Speaker wire coming out of the wall is much cleaner. The brush plate was swapped out for a cat 6 wall plate.

9. YinXiong Theater Surround Backside Connector

YinXiong Theater Surround Backside Connector

10 Ports 5 Pair Banana Speaker Female to Female Connection. The metal material with the golden plate is called Banana and the RCA. Integrate a female to male connection. The face plate is compatible at the moment. Support the creation of a special wall plate.

Brand: Yinxiong

10. YinXiong Theater Speaker Additional Connector

YinXiong Theater Speaker Additional Connector

Integrate 5 Ports 5 Pair Banana Speaker Female to Female. 1 Port Female To Female Connection. One port female to female connection. 1 Port Toslink Audio Fiber Female To Female Connection. The face plate is compatible at the moment.

Brand: Yinxiong

👤We used to have our surround system run out the wall through a single hole plate. The wires created a mess. The sound is still good after hooking everything up to the jacks. I ordered a 6 port plate to go upstairs to clean up the mess in our bedroom. The only problem I had was with the wires. It wasn't bad if you had to exert a bit of pressure on the buttons to open the spring plates. It's a good value for money.

👤It takes a few weeks to arrive from China. It's difficult to find an 8 speaker plate. I wasn't expecting a top quality plate but it's fine for the application. It's what I wanted. I think it will last for the house. It looks like the picture. The screw holes are straight. There were no surprises.

👤The clips don't hold the wire. Some people don't even like to be around people. Does not work. It took almost a month to get here. The seller has just delayed after being asked for a refund. The entire experience was very disappointing.

11. TNP Home Theater Wall Plate

TNP Home Theater Wall Plate

It's an ideal addition for your home theater speaker wiring setup that supports 5.1 surround sound speaker setup and works with your audio players. The wall mounted wire connection for five speakers to your stereo is included. The decora style white with gold plated copper and colorcoded speaker banana plug terminals have high amperage and high watt capabilities. Any standard 2 gang box is compatible. The banana binding jack plug post and the gold plated brass connection are made from high quality brass and are resistant to oxidation. It is designed to be used with banana plugs, spades or bare wire. Banana plugs are easy to install and remove and have a 3/4" spacing. The mess of wire strung along your baseboards is eliminated by wall plates.

Brand: Tnp Products

👤I only needed the left side of the plate for a front speaker, atmos speaker, and 2nd sub, but I couldn't find a single plate with that set-up. I tried to hook it up after installing everything. The hole is off center and I can't get my cord in it. If the seller is aware of the defect, they should not be selling these parts.

👤The wall plate is not too expensive. The layout was logical. The printing on the wall plate is clean. The quality of the connectors is ok. The in wall wiring needed to be installed. The plastic of the wall plate is cheap. Would I buy it again? Maybe. If you have another wall plate to install, you can review other products before making a purchase.

👤The plastic is a cream color and does not match my other wall plates. The plastic feels cheap and thin compared to normal wall plates you can buy for $1 at the hardware store. I was expecting much better for $35.

👤I don't know. A bag for me. The plastic face was flimsy and the connectors started spinning loose. I wouldn't buy again.

👤It works well, but it is flimsy. When you tighten the back side, the posts turn. It will work if you are careful with it.

👤It was easy to install. I was worried that it would take me a long time, but it was easy to access even if it looked crowded. I enjoy the sound of my home theater system.

👤It is simple to install and clearly labeled.

👤V-cut threads make winding the nuts easier. The picture was misleading in that it appeared to convert the Sub to the other way around, despite being threaded on the back side. Make sure your wiring is correct because the center channel connectors don't leave a lot of room on the top side.

👤Unfortunately, this item is not as pictured or described. The photo of what you bought does match. The display photos show clearly marked plugs for the left, center, right, and subwoofers, and it has an HDMI plug in. There are 8 sets of plug ins with no HDMI. You will get a photo of what you actually got which doesn't match the photos it is advertising. I've attached what you will get to save you.

👤Cheap plastic. The plastic plates became loose and nearly impossible to tighten.

👤It arrived quickly and is of good quality, the writing on the plate is a nice touch and it was cheaper than buying the stuff separately and making my own.

👤Well made, looks great and works perfectly. I love it!

Summary

What is the best product for home theater wall plate 5.1?

Home theater wall plate 5.1 products from Fosmon. In this article about home theater wall plate 5.1 you can see why people choose the product. Tnp Products and Monoprice are also good brands to look for when you are finding home theater wall plate 5.1.

What are the best brands for home theater wall plate 5.1?

Fosmon, Tnp Products and Monoprice are some of the best brands that chosen by people for home theater wall plate 5.1. Find the detail in this article. Cmple, Diytech and Legrand are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com