Thin ties can be used indoors or outdoors for your organizing and storage needs. 3 gang home theater wall plate can connect 7 speakers, 1 subwoofer and a UHD TV with HDMI; install this audio video wall plate in a standard triple gang outlet or low voltage bracket for your home theater system; low-profile Speaker wire wall plate is 4.5 x 6.4 x 0.2 inches; mounting The speaker wall plate has a red and black ring on it and can be used with banana plugs, spade connections, or bare 12 to 18 AWG speaker wires. Installation of a speaker faceplate for a future A/V receiver upgrade can be done with the help of a Subwoofer wall plate port. 4K wall plate with pass-through for common video resolutions including 4Kx2K (UHD), 3840x2160, and HD1080p; Audio pass-through for DTS-HD Master Audio, Dolby TrueHD and more. A lifetime warranty is included with this multimedia wall plate, which has a gold-plated binding post, aRCA, and HDMI connections. A lifetime warranty is included with this multimedia wall plate, which has a gold-plated binding post, aRCA, and HDMI connections.
👤I bought two sets of plates for speaker connections. Most speaker plates don't have an rcs connection for the subs and wouldn't work for me. These worked well for that purpose. Their white is a terrible match to Legrand. On Q. The plate is in an unfinished area in the basement, but in our great room they really stand out. I will have to remove the set in the great room and use individual keystones from Legrand to match. The Legrand keystone straps and wall plates are a perfect match for the Cable Matters Cat 6 keystones.
👤This product is poorly engineered. The plastic part that holds the metal terminals is too thick to fit against the wall. A very new person looks at the installation. I used the orange Carlon old work style open back brackets, which have an extremely this face plate, so that was not a problem. I tried to make it look professional by fussing with it for an hour. What a waste of time. I have a lot of electrical experience. This is a poor product.
👤The screws provided for installing into an electrical box were a joke. A tiny head that was stripped. I used the screws from the extra double gang blank cover plate. The face plate was fastened with the other screws. The most frustrating parts of Chinese products are the crappy screws. It must be a conspiracy to destroy the west.
👤I put my equipment in a closet. It can get complicated when you have surround sound. This makes it much easier to do. It would be great if it included the mounting brackets, but they are cheap.
👤It looks neat and professional, one time setup and saved time, I bought couple to use in my media room and living room, I need to switch my banana plugs.
👤It is easy to install and clear up messy wiring. I like this item because my HDMI cable tends to pull the connection out of alignment.
👤It was great for what I needed. I needed to have one speaker on the other side of the room and this was the one I found. It has a clean look. I painted a different wood wall plate to match the one on my wall.
👤I wish it had the option of jumbo sized outlets since you will most likely be cutting finished drywall to install them. romex is thick enough of a gauge to run behind the wall and stiff enough to run on its own. If you choose to use romex, be careful. Make sure the ground is cut back so you can't make a mistake. If they tailored this product to be compatible with romex or stranded wire, it would be 5 out of 5. If you overtighten, romex breaks easily.
👤I wanted something like this so that I could run the wiring for the speakers into a wall. The wall plate does a good job of presenting an attractive finish, and a dozen wires entering a wall can be attractive. I would buy more if the price were reasonable. I used screw-down terminations instead of banana plugs because I didn't want a wire to come loose and short. With 14 gauge wire, I was able to feed each conductor into the banana hole and bared wire out through the side hole, and then put it in place with the nut. This makes cable management easy and neat, and reduces the risk of interference and shorting between wires. There is limited thread under the nuts, so be careful how much you tighten them. I kept my fingers tight. Maybe an extra quarter-turn using grips. You will lose the threads if you go too far.
It's an ideal addition for your home theatre setup that works with audio, video, and video players, and supports 7.1 / 5.1 surround speaker setup. High power capabilities. Any standard 3 gang box will fit. It's made from high quality gold plated brass and prevents oxidation, which is found in other low quality wall plates. It is designed to be used with banana plugs, spades or bare wire. Banana plugs have a spacing of 1/3 of a mile for use with dual plug adaptors. The 1 HDMI 2.0 ports which are backwards compatible with earlier versions of the HDMI specifications significantly increases bandwidth, 4K video resolution. A multi-dimensional audio experience with up to 32 audio channels.
👤The product is one of a kind and I like it. I couldn't find anything else that was the same. I wanted something for my home theater speakers and it did the job. I only have 5.1 surround so I used two extra side speaker connections for my outdoor speakers in my wall. I agree with reviews about the screws stripping. The second wire was attached to the screwdown. I bought a pack of banana plugs to put on the end of the wires so it wasn't a problem for me.
👤It was rather disappointing. The mounts on the seats were not clean. Does not sit well. The force required to make it worth causes you to remove the cheap white and groves from the screw. I was expecting more.
👤This was used for a new surround sound install. I've done many speaker installs and they cause a lose connection. Three of them spin freely and do not make connections. A replacement unit was shipped to me after I left a poor review. I replaced the outlet box that had the spinning connections. It works like a charm and all of my speakers are connected. I learned that if you remove the wire and tighten the spinning post, it will fully tighten. Retighten the wire and it will work without spinning. Thank you, TNP.
👤The offer points were not working. The moment I connected my cable, it started humming. We spend 4 hours trying to figure out the problem. I let the seller do what he wants. Don't buy this product.
👤The Great Wall plate looks and works as described. I use it with 3D HDMI and it works perfectly. There are many different configurations to fit every need. Be sure to check out what you want before buying. There is a return fee. I had to pay $6.47 to return the wrong one. I didn't deduct stars because it was my fault.
👤This is a must-have for surround wiring. I installed a 7.2 system and it worked out great. You can get almost any combination of audio/visual equipment you need. Do your planning on location and wire-routing, get good quality speaker wire and HDMI (high-speed with Audio Return Channel), get the remod-style mounting brackets/box, and cut your hole between the same studs as your TV. It's best to have 10 to 12 inches of wire coming out of the wall because you need space for your hands to manipulate the wires and nuts on the terminals. If you have a basement with access to the floor below the mounting location, it's best to drill 4 half-inch holes through the bottom plate of the wall and feed your wires up those holes. If your TV and surround receiver are compatible, you can just use one HDMI port on the wall plate to send your audio and data to the TV, and you won't need a second port.
👤This worked well for my application. When purchasing a cable for a sound system, you need to pay attention to the length of the molded end. I had to cut some holes in the back of my box to fit my cables.
Banana jacks don't work with dual banana plugs. Only works with banana plugs. The gang box/mounting brackets are not included. It is easy to install and remove with no special tools required. Standard gang boxes have mounts. A clean and tidy installation can be achieved by eliminating the wiring along your baseboards. The front plate has dedicated labeling. Use with banana plugs. Up to 5 speakers and a sub can be connected. Depending on the depth of the gang box, banana plugs can be accommodated on both sides of the plate at the same time.
👤The previous owner of my house had a lot of speaker cables hanging out of the wall. I had to place my sound system very close to the wall because the cables were so short. The cables were not labeled as to which wire they were connected to. The product solved all of the issues. I used a D-Cell battery and a multimeter with my daughter to determine the polarity of every wire. I could put it in the back of the plate and not have to think about it again. I was able to plug in the speaker into the sound system with the new speaker wire capped with banana plugs. I put pictures of the steps I took in my project in order for others to have the same success. The box has a hole in it's side that's opposite of the stud. The 1 gang box should be turned into a 2 gang by using a low voltage gang extender. I drilled a hole into the side of the outlet box to thread the speaker wires through. I figured out that the wires are in the same place. I screwed everything into the wall after attaching the speakers. I had a bad cut for my box extension, but I didn't use this product.
👤The painted screws are so thin that you can't see through the paint to the bag it came in, and the plastic is very old and clouded.
👤I bought a wall plate to connect my speakers. The product arrived in a box that was easy to open and start my installation in. If you choose, you can use one or both of the plates. Pick a single game outlet cover if you only need one for now. You can plug your wires into a place you can access with the help of the terminals. Banana plugs can be plugged into the back side as well as the front side. I wanted to use the F-connectors for my Coaxial cable connection. As this product is sold, you have a traditional RCA connection. If you want the sturdy and unmovable connection of a f-type screw on, then you will need to purchase a RCA to FTYPE adapter. I chose to buy it from the Amazon store.
👤The four mounting holes were not present in this one. I connected the speaker wires and discovered that it didn't have mounting holes. There were no holes in it. I bought the same one in the same year to install a 5.1 speaker sytem. There were mounting holes. Before hooking up the speaker wires, be sure to check that it has the mounting holes. I wasted 1/2 hour.
👤Single banana plugs can be used to make this fixture work. I wanted to use dual banana plugs, but the banana jacks on this unit are not on standard centers. The description on the website states that the posts aren't on centers. It took careful reading to find it. It would be great to make a bigger deal of that fact. I will be able to use the wall plate with single banana plugs.
Plug and play connections, 3.5 MM aux to a wire. The 3-Gang 7.2 surround sound distribution wall plate is compatible with 4K@60Hz and supports HDMI 2.0. The high-speed connecting devices are made of gold. The wall plate has a gold plated connection. The HDMI wall plate from Fosmon is a clean connection point for your audio/visual equipment. hiding cables in your walls is a way to remove cable clutter. All of your sound is included. This wall plate can be used to set up a surround sound system. This product has a limited lifetime warranty. Refer to the website for more information.
👤The plate was straight to the point and made my home theatre connections so easy to manage that I can just plug the receiver into the jacks. Behind the wall, cable management is done. I can't speak for the quality of the HDMI ports because I used this opening for a 6-port Keystone plate which I then used for the CAT6a network ports. I only mention it because there is a use case for someone to swap the included HDMI ports for something else that works better in their situation. As long as you have a standard Keystone plate, this can be done. A different plate can be installed just as quickly. The reason I removed a star from the review was because the jacks on the item were not good. After installing everything and mounting it to the wall, I was hit with a constant bass signal coming out of my woofer. I knew it wasn't coming from a specific source since my receiver was off. I removed the wall plate and found that the jack on the inside had broken and the plastic plug had been pushed through to the back. The signal pin was shorting the cable because of this. I moved the cable to the second jack and it broke the first one. I decided not to return the plate because I had some extra keystones and jacks that I just removed and put in this wall plate. There were no more breaking issues after that. If you buy this product, keep an eye on the sub jacks as the plastic looked brittle and could break over time.
👤3 of these were ordered. Two of the three have bad HDMI connections. I tried different cables and tried another outlet. After all of the work, I returned what I thought were faulty cables, but only one of my three actually function. I am going to swap the HDMI gang outlet for another brand because the speaker connections work on all three of them. A lot of work, a lot of problems, and a lot of wasted time. 1/3 of my order price was returned by the company because the gang outlet didn't work. I would try them again in the future. The stars were from 2 to 5. Customer support is great.
👤I like the fact that I can get a 7.2 wiring into one location. I don't need the HDMI because I wouldn't be using it in the walls. The option to include another four-set of post for the plate would be better. I was able to find an insert with eight posts and swap out the HDMI insert for it. This is a nice plate if I only did 7.2.
👤The wall plate cleaned up my cables. The wires and cables were fished out of my walls and put into a cabinet. I could have just bought a wall plate with a large hole in it to save a few bucks but the plate really adds that extra touch making it look very professional. The 6.1 configuration includes the Front Left, Front Right, Center, Surround Left, and Sub Woofer. You can also hook up 2 cables. The left, center, and right panel are released by the 6 screws on the wall plate. The front plate will be put back on after the panels are screwed to the low voltage 3 gang brackets. I used the PROS clean plate from the 3 gang low voltage brackets. The plugs glide in smoothly and are high quality. There is a The HDMI port supports both audio and video. The banana posts were loose upon arrival. It was easy to fix with a pair of pliers.
Their premium speaker wire connections are far superior and much easier to use than banana plugs, and can support up to 7 surround sound speaker setups. It accepts up to 12 gauge speaker wire. There are two HD 4K UltraHD HDMI ports that give you a perfect number of ports. You need to connect your 4K Ultra HD Player. The home theater wall plate has 2 HDMI Ports. Are you a fan of streaming your favorite shows and movies? Enjoy the bufferless experience that an Ethernet connection can provide. Say goodbye to choppy, fuzzy picture and hello to amazing clarity from your streaming HD, 4K or UltraHD sources. It is all about that sound. Their speaker wall plate comes standard with the best connections available. You can connect your surround sound receiver to the optical toslink port and the sub to the RCA port. Their speaker wall plate is stunningly beautiful and built to last for years of worry-free use. The hidden screw hardware is easy to install and gives you a professional look.
👤I used this line of components for my new home theater, which included speaker wire, coax, and HDMI inside the walls. The problem is that the bandwidth of 4K HDMI doesn't like long cable runs. To get to my projector, I was going to use a short HDMI cable that was plugged into the projector to connect to another cable in the wall, and then I was going to use another cable in the ceiling to connect to the projector. HD signals went through. 4K wouldn't. The projector didn't receive a signal with 4K. I had to string an HDMI cable across the room to the projector after all that. The total length of cable is the same. It works well. Don't expect this thing to work with 4K. The speaker clips are hard to push and only accept up to 16 gauge stranded wire, so it's not the cables... I also used really high quality HDMI cables and tested them before installing in the wall, so it's not the cables... It was difficult to get in the walls when I ran 14.
👤There are before and after photos. This setup takes time and effort, but in the end it is great. It's a good idea to Springs a little tight on the speaker wire. The force required for the optical is absurd. All told, it was awesome. I pulled out a pair of keystones to fish through cables that have no chance for a connection. The speaker wall plate costs more. keystones can be removed and replaced. I was very happy to purchase this product. Obviously flimsy, thin, lousy quality and made in China, but who cares? It sounds great. I have not touched it for ten years and it works. Done.
👤Our home has a speaker system. Our living room has a single double-gang-sized wall that feeds through all those speaker wires. This product is the only one that can accommodate that many connections in one opening. Simple as that.
👤I needed to provide speaker terminals for six speakers and an F feed-through connector in a double gang-box form factor. This was a good solution. I filled the interface topologies with blanks.
👤I used a wall plate to hide the wires from my audio and visual equipment to my television. The television is close to my equipment.
👤I bought this product to have a clean installation of my 7.1 surround sound system. The Cat 6 connection works just fine, but the HDMI ports don't support 4K signals or Arc.
👤It works well. It's nice and small for all of the connections. They didn't grab the first time, so I had to reinsert some of the audio cables. We will see how it holds up over time.
A high quality gold plated copper connection is built with Remium built. It is easy to install and remove with no special tools required. There is a color code. Matching binding posts on the front and back. Standard size gang boxes are not included. A clean and tidy installation can be achieved by eliminating the mess of wiring along the baseboards.
👤It was almost five stars. It seems that all of these products are made in the same Chinese factory. The quality is reasonable for the price. The one that fits with a standard Decora wall plate cover is different from the five speaker wall plate. If you are okay with using the supplied wall plate cover, you should use two of these instead of the five speaker product. Some reviewers report issues with stripped threads. The reviews are correct, but you should let the seller know. This happened to me when I used the five speaker product. Some banana plugs are too long to fit in the speaker receptacle. This issue has been encountered by other reviewers.
👤The product is easy to install. Make sure you have your wires spliced before you install the wall plate. I used banana plugs to connect the wires from the wall to the receiver.
👤I bought three of these Quad speaker units and ganged them together in a three gang assembly to create a 13 speaker interface behind my receiver. The middle unit was modified to provide a custom interface by exchanging the bottom two binding posts for two subwoofer posts. I am very happy with the quality and convenience of this product, and I can definitely recommend it.
👤I put two of these next to each other for an 8 speaker connection because they were easy to install. It works because movies sound amazing.
👤A hole in the wall allowed the speaker cable to come out. I don't have a problem with adding my own labels.
👤The connecting point for my surround sound speaker system was the wall plate. You think you are getting two of them in the picture. It is a front and back picture. Banana plugs can only be used on one side. The other side has to be hardwired. It made for a clean installation.
👤You can swap out a terminal for a coax easily. I ran a line to my amplifier. It's working great!
👤It works well and has a high density. I removed the plate from the wall cover because I wanted to use it with a wall box. The new wall box fit the Decor style plate perfectly. The cross threaded one did tighten down. If needed, I would buy again.
👤Plates cracked on the wall. The plugs are great.
👤A good product, but beware! The holes for securing the plate do not match the overall size of the plate. I drilled new holes in the wall plate, so you have to either buy a plate mounting separately or drill new holes in the wall plate. The description should state that fact. I have no complaints about the product at all.
👤The Terminal macht bei wertigen Eindruck. Ich ist das Terminal, so I have a problem with der Mae. Leerdosen ist das Terminal. Im Trockenbau ist das aber der Ausschnitt.
👤Quality control could be better because they look good and generally do the job. I had to use banana plugs inside the wall box because one of the locking nuts wouldn't tighten down on the wire I was using. The included screws are not the standard north american thread, but they were a fine thread and I had some left over from a previous reno.
Designed for home theater systems with powered subs and surround sound speakers. The gold- plated connectors have (14) gold binding posts and (2) female F to female RCA jacks. For easy connections, use spade lugs, banana plugs, or plain bare wire. Color matching screws are included. The dimensions are 4-7/8” x 4-7/8”
👤There are not enough holders in the back. Not worth it. Don't waste time and money.
There are 8 binding posts with 3 for the left side, 3 for the right side, and 2 for the center. The front and back of the amplifier have an RCA connection. 3 gang white plate with binding posts. 2 jacks for subs. The box is a 3gang box.
👤I was expecting this to fit a standard wall plate and I was going to use it with my Dolby Atmos setup that has 11 wired speakers and 4 speakers in different zones in the houses. I had to come up with something. I bought 3 of these to have 15 plugs for my speakers and one passthrough brush for the cords. I tried to fit this with a standard 4 gang wall plate but it was not possible because of the extra plastic. I spent an hour grinding down the plastic on the face plate and got it to work. I would expect it to fit a standard wall plate.
👤Speaker wires are no longer poking out of the wall. There are no silly doctored faceplates anymore. I have all of my speakers wired in the wall, which is easy to install and move around. It took me 50 years to figure out the value of spending a few dollars to properly install and organize all of my entertainment systems cables, and now that I've done it, it's hard to believe how easy it was. A few minutes of up front work have replaced hours of wasted time trying to make sure I don't accidentally cross wires, because my system is cleaner, professionally installed, and a few minutes of up front work have replaced a few minutes of up front work. I would highly recommend this box to anyone installing an entertainment system.
👤I have an electrical wall box and 5 ceiling speakers. The plate allowed me to quickly connect the A/V receiver with a cable with banana plugs. It is easy to remove the banana cable from the A/V receiver when the electronics cabinet is moved. It took a while to install. I needed longer mounting screws for the electrical box because it was set back an inch. The speakers had cables that had banana plugs. The banana jacks on this plate allow banana plugs without interference, which was better than expected.
👤The binding posts on the back side were stripped out while trying to tighten things up. The engagement of the thread is poor. It's working for now. I'm going to replace it because I can't trust it. The sticker says "made in China" and it's not listed as aUL. Use this at your own risk. I used the ICC brand for everything else, but they don't make a three pair version. I'll buy their four pair version and just have one unused pair, which drives my OCD nuts. My connections are falling apart inside the wall, but it's better than that.
👤I have a media closet with surround sound speakers in it. Extra speaker wires come into the media closet because the tv can go on two different walls. I ordered two if these and put them in because I couldn't stand the mess of wires there. They seem to be well built, the finishes are good, and the terminals screw down tight. It can accept either bare wire or the banana jack style. I stuck the ends of the wire in the holes and tightened the screws. It worked well.
Excess cable can be stored in-wall and there is slack for convenient access to the back of the TV. The media center can be moved closer to the wall. A 125V receptacle is included. The cable access strap is easy to use. The total outlet is 2. The easy extension of electrical wiring is supported by the other products in the family.
👤There are wires behind my TV. I wanted something that was durable, usable, and good looking. I like that the unit is not square so that furniture can be closer to the wall. Since the three main ports are decora, they can be changed out to be whatever you want. You can change the location of the power outlet. The mechanism for holding the unit on the wall is good. I've taken it off a few times and I haven't had any issues with it. I put a piece of lath at the top and bottom of the hole so that I wouldn't damage the drywall if I tightened the screws too tight. That makes for a good installation. The brush insert was the only thing I kept. I added a keystone plate instead of an outlet and replaced the screw-back speaker plates with ones that have more terminals. I replaced the silver screws with white ones. I'm very happy with this unit, even though I only used the shell. It is holding up a lot of hardware.
👤This uses standard Decora inserts. To get the connections I wanted, I swapped my own keystone plates in. If you need to get more cables to your TV, there's an additional knockout on the top. I like that it allows me to expand in the future. I wish it had the brush. There is a The bad? The screws are made of silver. It's not a big deal if your TV is in front of it, but it looks cheap to have metal screws. The outlet box for power is an old style one that you can find at big box stores. I expected a more elegant solution. It did the job and was easy to hook up. I didn't know how it would fit in a wall. It's your wall, but it should fit.
👤I took the opportunity to run my surround and subwoofer wiring under the house while I was remodeling it, and this box fit the bill. The box is easy to install and can be tailored to your liking. I replaced that section with a Legrand On-Q decora 4-port keystone plate because I didn't need the front speakers. I ran a patch cord up to the TV and hardwired the receiver and PS3 to the other ports.
👤We hired a professional to hang the tv and hang the wall mount. The outlet has a lot of plugs and space. The TV is flush on the wall. Exactly what we wanted.
👤It's a good way to clean up the installation.
👤Excited to install. The product seems to fit my needs. Thank you.
👤Speaker wire coming out of the wall is much cleaner. The brush plate was swapped out for a cat 6 wall plate.
Easy installation. Each speaker wire keystone port has a female to female connection. Push n' play is the same. There are no tools or additional hardware needed to install your surround sound speaker wires. VARIATION: Their products are hand-crafted and some surface marks and color variations are inherent qualities of the process. INSULATED BACKER: An insulated barrier keeps both heating and cooling. It is easy to install. Do not install TIGHTEN SCREWS over the mounting screws, they are hand held screw drivers. It's included. Adding a switch plate electrical outlet cover and coordinating mounting screws is an easy way to update your home decor. Q-Seal technology is a scratch and rust resistant surface that protects against stains. There are multiple configurations and finishes for the electrical outlet cover, rocker plate, and light switch plate. There are multiple configurations and finishes for the electrical outlet cover, rocker plate, and light switch plate.
👤The insulation layer on the plate is very good for the exterior walls where cold air can come in. I had a lot of trouble installing the plates. The electrical box and walls are not always perfectly flat. If they are, you don't need long screws to reach the threaded hole. You need regular-length screws, not the tiny nubbins in this product, to reach across in real life. I was able to install the screws despite having old regular-length screws laying around. I had to push hard to get the screw to connect with the threaded hole on the other plate.
👤The screws don't go in far enough, the insulation isn't very good, and it doesn't look very nice for the price.
👤I knew it wasn't that great, but it served it's purpose and matched our other existing wall plate. It is cheap and thin.
👤These covers are durable. They are not flimsy like other plastic covers. I would recommend them to anyone.
👤Shut off the cold air on the outside wall switch.
👤It seems like good quality. White is not dull. It is still plastic and do not over tighten screws.
👤It looks good, but it's about $1 less than Lowe's.
👤It was better than expected. Looks good.
It's an ideal addition for your home theater speaker wiring setup that works with audio players that support 3 surround sound speaker setup. The wall mounted wire connection is for five speakers. The decora style white with gold plated copper and colorcoded speaker banana plug terminals have high amperage and high watt capabilities. Any standard 1 gang box is fit. The banana binding jack plug post and the gold plated brass connection are made from high quality brass and are resistant to oxidation. It is designed to be used with banana plugs, spades or bare wire. Banana plugs are easy to install and remove and have a 3/4" spacing. The mess of wire strung along your baseboards is eliminated by wall plates.
👤Do not buy them. They are very low quality. The wires can fall out of the loose fitting rings. They strip if you try to make it snug. If a wire is loose behind the plate, you will short out your amplifier. These are the lowest quality items I have ever gotten from Amazon.
👤The ugly hole in the wall was turned into a wall plate. If your wall box does not have a place to screw in the middle plate, you will need to glue the inner plate to the outer plate. This is easy to do. Put glue on the opening between the inner and outer plates and hold it there for an hour with a spring. It is one solid plate. Bandanna plugs or bare wires are used in the inner plugs. The plugs are the same. Looks great. It works well.
👤The product is sturdy. Looks great. Banana plugs fit on the front side and on the back side. You will need a low voltage bracket if you want to mount in the drywall.
👤The threading was poor. I used banana plugs as a result. Too much of a PITA can return.
👤I am happy with the purchase. Quality is solid and the price is good. If I needed the same product, I would buy again. I received the item quickly.
👤You can't double it up because it's not a standard size and you have to use the faceplates that come with it.
👤Attaching banana clips to either side was easy.
👤The product is suited for 3 devices.
👤The quality of these is not the best, some of the threads were stripped, making it hard to secure the cables. It wasn't the best experience to push the wire between the stud and the nut.
👤It has a finished look. There are secured hook up connections. The price is reasonable.
Home theater wall plate 7.1 products from Cable Matters. In this article about home theater wall plate 7.1 you can see why people choose the product. Tnp Products and Fosmon are also good brands to look for when you are finding home theater wall plate 7.1.
Cable Matters, Tnp Products and Fosmon are some of the best brands that chosen by people for home theater wall plate 7.1. Find the detail in this article. Diytech, Construct Pro and Cmple are also brands that their products are worth to check.