Best Home Theater Wall Plate 7.2 Atmos

Plate 20 Aug 2022 10+ Comments Open

1. Vanco HTWP72 Theater Connection Plate

Vanco HTWP72 Theater Connection Plate

It uses 7/16 nuts for installation. It works on a 3-Gang j-box. There are gold binding posts and jacks.

Brand: Vanco

👤My son installed a 7.2 in-wall sound system to complement my flat screen. The little plate allows easy connections and a professional look.

👤I wanted to tame the wires of my 7.1 system and built an in wall rack for it, this item worked great for that. The price was more reasonable than at local stores. I'm very pleased with the item.

👤Does what it says and what you need. Great product. It's perfect for the 7.2 theater system.

2. Construct Pro Surround Sound Theater

Construct Pro Surround Sound Theater

Designed for home theater systems with powered subs and surround sound speakers. The gold- plated connectors have (14) gold binding posts and (2) female F to female RCA jacks. For easy connections, use spade lugs, banana plugs, or plain bare wire. Color matching screws are included. The dimensions are 4-7/8” x 4-7/8”

Brand: Construct Pro

👤There are not enough holders in the back. Not worth it. Don't waste time and money.

3. Monoprice 106707 Surround Distribution 2 Gang

Monoprice 106707 Surround Distribution 2 Gang

The dimensions are 4-7/8” x 4-7/8” Eliminates tedious work and decreases labor cost by 20%. The conductor adjustment is automatic every time. There are bare wire connections on the front and rear of the plate. 3. 83" W x 3. 60" H. The package weight is 0.8 pounds.

Brand: Monoprice

👤I returned a used 7.2 2-gang Monoprice plate because I thought it was bad, but I now believe it was not broken. The 7.2 is different after looking at photos of different wall plates. It has little buttons that you can depress to insert the wires. There is a mechanism that prevents the use of banana plugs. The monoprice ones are not firmly held. The barrel is much larger than a banana plug. I believe that the 7.2 is not designed for banana plugs. Someone else returned the used one that I got. I wanted a product that was compatible with banana plugs, but it didn't seem to be this one. This review does not apply to the 5.1 and 8.2 products because they show different terminals. Is 1-star a warning? They did not understand the products they sell. They told me that it would work with the plugs after I spoke with them. If you were hooking a bare speaker wire into both sides of this, it was easy, as the springs were firm and there was plenty of room for 12ga wire. The description should be different and this should be a separate item.

👤I am a huge fan of mono price cables. They have always been my first stop for cheap cables. I thought I would try some of their equipment, however I found it to be cheap Chinese stuff. The banana plugs screws were stripped at the factory to make them look like low quality. I can see the paint on the metal they are supposed to give it the sheen of gold, however it doesn't look like any of the other gold plated cable items that I have.

👤I have used plates from Dayton Audio, which I really like, and from Parts Express, which has some limitations, but also nice features. If you don't need to go with top of the line components, these work just fine. The posts are simple 4mm wire on both sides, but using spades might be a challenge due to the density of posts. I used a piece of copper tape and a piece of direct connected wire in the back and front of the project. I changed the orientation of the post hole by removing the nut in the back of the posts. The plastic plate with the posts has a good amount of play room for mounting which is really appreciated when using with other face plates. I have seen cheap plates with imprinted lettering, but it does not appear that it will rub off anytime soon. I prefer a screwed in F connection in the back of the wall plug-in, and I would have liked more if the subwoofer post wereRCA in front. Again, personal preference and there's probably just as many people that don't like the post as they do. If I want to get the Dayton's, I'll have a screwdriver notch in the thumb screws. I'm giving it 4 stars, not that I'm subtracting a star for any specific reason, but just "I like it" and would buy again if I needed an inexpensive plate.

4. Acoustic Audio HD728 Ceiling Surround

Acoustic Audio HD728 Ceiling Surround

Not all TV's have an Audio-out jack. The transmitter may need to be connected to a cable or satellite box. A 9 piece home speaker set includes 4 wall speakers and 2 ceiling speakers. Butyl rubber surrounds, round cut out, and low profile housings. The cut out is 19.25" X 7.5" and the depth is 3.25". 2 HDS10 wall passive Sub speakers, 200-300w each, 26hz-200hz, 10" Woofers, cut out is 10.625" X 10.625", overall is 12 X12", depth is 3.75", these passive subs require a Ws 1005 Sub amplifier This listing is for a complete 9 piece wall and ceiling speaker set.

Brand: Acoustic Audio By Goldwood

👤Each of the subs will need an independent amplifier to provide power to them. If you have an audiovisual receiver that can provide Pre Amp Outs, you can connect your speakers to an external amplifier. We put in a pair of front speakers along with a pair of back speakers. Behind our listening area, we installed 2 rear speakers, 1 sub, and one round in the ceiling. The other round was above the other seating area. We were able to verify the ceiling speakers were working and generate tones using the AV receiver YAPO because we didn't hook up the subs to the audiovisual system. I wouldn't purchase this product. The system looks complete and the seller says that only 2 Amp products will work and make it work. The use of passive subs would be a problem with this speaker package. Pre Outs are only available for active subs in the majority of the receivers you will see. I bought a Rockville amplifier that I thought would provide enough power for both subs. After reading previous reviews and questions about other buyers concern for the amplifier for the subs, I was not able to verify if other users were able to use other Amps besides what the seller recommended. I waited until our living room was renovated to install the speakers and wires for our audiovisual system, so I am out of the return period. I left questions for other buyers and their reviews, so I was not able to get a reply or support for this product. It turns out that a purchase was made under good intentions. It is very embarrassing to show friends and family what you have purchased and only able to enjoy tones from all speakers and have no subs as they remain in the wall as "Display Only". The money, time, and research spent before purchasing was not what you were expecting. My recommendation is that if you want a 5.2 or 7.2 speaker configuration for your home theater, you should not buy from this seller and build your own. This purchase is not meant for you unless you know how to use passive and active speakers. The seller will want you to purchase their own Amps for each sub, no matter what speaker system you buy. You can find 2 front speakers, 2 matching rear speakers, 2 additional wall or ceiling speakers, and 2 active subs that can be hooked from your audio equipment. The tech support you expect is poor. The reviews from other buyers are more than 3 years old. I don't think this was an honest purchase, so I can't give an honest review. If you understand passive and active subs, the product may fit your needs. This purchase was not for me. I probably wasted money on the external amplifier I bought because it wasn't recommended by the seller. The seller told me that the only amplifier that will work for this speaker set is the WS105. The Pre Outs from your receiver are used to connect your subs to the outs of the amplifier. Let me know if other people are able to do this work. Before buying, please do more research. Just finished hooking up the 5 man speakers to a Yamaha and the Rockville RPA 9 Amps and the Pre Outs of the Sub 1 and Sub 2 to the input of the Yamaha. The performance was so good that the sub woofers ran out of Rockville, Stereo, Low Pass and turned the system on. I felt like I was on stage when they were so loud. I would buy it.

5. Fosmon Quad Speaker Theater Plate

Fosmon Quad Speaker Theater Plate

A high quality gold plated copper connection is built with Remium built. It is easy to install and remove with no special tools required. There is a color code. Matching binding posts on the front and back. Standard size gang boxes are not included. A clean and tidy installation can be achieved by eliminating the mess of wiring along the baseboards.

Brand: Fosmon

👤It was almost five stars. It seems that all of these products are made in the same Chinese factory. The quality is reasonable for the price. The one that fits with a standard Decora wall plate cover is different from the five speaker wall plate. If you are okay with using the supplied wall plate cover, you should use two of these instead of the five speaker product. Some reviewers report issues with stripped threads. The reviews are correct, but you should let the seller know. This happened to me when I used the five speaker product. Some banana plugs are too long to fit in the speaker receptacle. This issue has been encountered by other reviewers.

👤The product is easy to install. Make sure you have your wires spliced before you install the wall plate. I used banana plugs to connect the wires from the wall to the receiver.

👤I bought three of these Quad speaker units and ganged them together in a three gang assembly to create a 13 speaker interface behind my receiver. The middle unit was modified to provide a custom interface by exchanging the bottom two binding posts for two subwoofer posts. I am very happy with the quality and convenience of this product, and I can definitely recommend it.

👤I put two of these next to each other for an 8 speaker connection because they were easy to install. It works because movies sound amazing.

👤A hole in the wall allowed the speaker cable to come out. I don't have a problem with adding my own labels.

👤The connecting point for my surround sound speaker system was the wall plate. You think you are getting two of them in the picture. It is a front and back picture. Banana plugs can only be used on one side. The other side has to be hardwired. It made for a clean installation.

👤You can swap out a terminal for a coax easily. I ran a line to my amplifier. It's working great!

👤It works well and has a high density. I removed the plate from the wall cover because I wanted to use it with a wall box. The new wall box fit the Decor style plate perfectly. The cross threaded one did tighten down. If needed, I would buy again.

👤Plates cracked on the wall. The plugs are great.

👤A good product, but beware! The holes for securing the plate do not match the overall size of the plate. I drilled new holes in the wall plate, so you have to either buy a plate mounting separately or drill new holes in the wall plate. The description should state that fact. I have no complaints about the product at all.

👤The Terminal macht bei wertigen Eindruck. Ich ist das Terminal, so I have a problem with der Mae. Leerdosen ist das Terminal. Im Trockenbau ist das aber der Ausschnitt.

👤Quality control could be better because they look good and generally do the job. I had to use banana plugs inside the wall box because one of the locking nuts wouldn't tighten down on the wire I was using. The included screws are not the standard north american thread, but they were a fine thread and I had some left over from a previous reno.

6. Fosmon Surround Distribution Speakers Subwoofer

Fosmon Surround Distribution Speakers Subwoofer

The Multi-Purpose Cables Label is perfect for organizing cords. The gang box/mounting brackets are not included. It is easy to install and remove with no special tools required. The gang boxes have mounts on them. A clean and tidy installation can be achieved by eliminating the wiring along your baseboards. Matching binding posts on both sides with thumbscrews. 2 jacks. Up to 7 speakers and 2 subs can be connected. The front plate has dedicated labeling. Use with banana plugs. Depending on the depth of the gang box, banana plugs can be accommodated on both sides of the plate at the same time.

Brand: Fosmon

👤Since I was rebuilding the house, I decided to hide all the wires of my 5.2.4 system.

👤The problem is that the wall plate doesn't come with any white screws to mount to the standard 2-gang wall plate. If it stayed attached, it wouldn't be very durable, since they think you'll mount it directly to the wall. It's a mystery why the screws aren't included in the product. I am not the first person to review this model. They won't line up with most 2-gang boxes, but it would still be nice to have them.

👤The 7.2 Home Theater wall plate is very well made. The picture shows a 7.2 speaker wall plate, which is what the title description states. The price is pros. The cheapest 7.2 wall plate is well made, fits great with banana clips in-wall, and all necessary screw hardware is included. I used a label maker to label the ports the way I want them, and it works great. It was a great bang for your buck.

👤It was made well. If you need to spray paint the plastic plate a different color, the gold plated metal pieces can be removed and re-installed. The plugs fit neatly into the plate receptacle and are accepted for stranded speaker wire. The front and back of the plate have banana plugs or bare wires on them. Very pleased with appearance and performance. Would buy again. I have seen similar product at other stores and it was 2 to 3 times higher than at other stores.

👤You can get the same product in the stores for half the price. If you don't have the two gang back box, then you will need to make some wall modifications. The product itself was good, decent quality, and as good as anything I have purchased from Home Depot or Radio shack. Even if they had provided some labels for you to apply, it would have been better if you had a PC and a printer to make it.

👤There's not enough room for banana clips on both sides of the termination. If you push hard from one side, the tension on the other side will pop.

👤The hooks worked perfectly for my speaker system. I have a 5.1 system with 2 additional speakers in an adjacent room. I had a wiring mess. It's easy to install. Great look after. Really has a solid product. I connected my bare wire to the wall. I am using banana plugs. It makes a great connection between my receiver and speakers. My needs are slightly different so I bought the other side of my basement. Both products are great and would not hesitate to purchase them again.

👤I can't put banana plugs on both sides. I had to screw down a bare speaker wire connection on the back. I found that process annoying. I had to keep the wires short so that they would fit in the electrical box. The banana plug wouldn't go into it, so I had to drill out one of the plugs.

7. Vanco HTWP72BW Whole House Theater

Vanco HTWP72BW Whole House Theater

It's on a four gang J-box or low voltage mounting bracket. The 7/16" nuts accept banana plugs or stripped wire. Accepts up to 12 AWG wire. The binding posts and jacks are gold plated.

Brand: Vanco

👤The product description does not mention that the Sub Woofer connections are F-Type on the back. Since Sub Woofer Wall Plates are Coax on the back and also on the front, you'll need a coax cable with an F-Type connection on one side and an RCA connection on the other. Since your cable is probably on both sides, you'll need to purchase an "RCA Female to F-Type Coax Male Adapter" to connect it to the back of this product. If this omission was corrected, I would give this product 5 stars.

👤The build quality is good. The front of the plate is good, but I don't know why. The description doesn't say I needed a full rca pass through. I have to replace them withrca.

👤This was more expensive than the last 7.1 wall plate, but it was worth it. One solid face plate instead of three seperate pieces that are screwed into a bracket and covered with a plate. My wiring was cleaned up nicely.

👤It makes running cables much easier. It makes it look neat. It was easy to install.

👤I wired my living room for 7.1. Well made and looks great. Pick up a 4 gang low voltage remodel box at the hardware store. They are cheap.

👤Well made product, thick plate and well made connections.

👤It's nice to organize the sound.

👤The product is high quality. I had to return it because I never used it. I changed my plans because I thought I needed it.

8. Legrand HT2103WHV1 Home Theater Connection

Legrand HT2103WHV1 Home Theater Connection

Excess cable can be stored in-wall and there is slack for convenient access to the back of the TV. The media center can be moved closer to the wall. A 125V receptacle is included. The cable access strap is easy to use. The total outlet is 2. The easy extension of electrical wiring is supported by the other products in the family.

Brand: Legrand

👤There are wires behind my TV. I wanted something that was durable, usable, and good looking. I like that the unit is not square so that furniture can be closer to the wall. Since the three main ports are decora, they can be changed out to be whatever you want. You can change the location of the power outlet. The mechanism for holding the unit on the wall is good. I've taken it off a few times and I haven't had any issues with it. I put a piece of lath at the top and bottom of the hole so that I wouldn't damage the drywall if I tightened the screws too tight. That makes for a good installation. The brush insert was the only thing I kept. I added a keystone plate instead of an outlet and replaced the screw-back speaker plates with ones that have more terminals. I replaced the silver screws with white ones. I'm very happy with this unit, even though I only used the shell. It is holding up a lot of hardware.

👤This uses standard Decora inserts. To get the connections I wanted, I swapped my own keystone plates in. If you need to get more cables to your TV, there's an additional knockout on the top. I like that it allows me to expand in the future. I wish it had the brush. There is a The bad? The screws are made of silver. It's not a big deal if your TV is in front of it, but it looks cheap to have metal screws. The outlet box for power is an old style one that you can find at big box stores. I expected a more elegant solution. It did the job and was easy to hook up. I didn't know how it would fit in a wall. It's your wall, but it should fit.

👤I took the opportunity to run my surround and subwoofer wiring under the house while I was remodeling it, and this box fit the bill. The box is easy to install and can be tailored to your liking. I replaced that section with a Legrand On-Q decora 4-port keystone plate because I didn't need the front speakers. I ran a patch cord up to the TV and hardwired the receiver and PS3 to the other ports.

👤We hired a professional to hang the tv and hang the wall mount. The outlet has a lot of plugs and space. The TV is flush on the wall. Exactly what we wanted.

👤It's a good way to clean up the installation.

👤Excited to install. The product seems to fit my needs. Thank you.

👤Speaker wire coming out of the wall is much cleaner. The brush plate was swapped out for a cat 6 wall plate.

9. Fosmon Home Theater Wall Plate

Fosmon Home Theater Wall Plate

The gang box/mounting brackets are not included. It is easy to install and remove with no special tools required. Standard gang boxes have mounts. Matching binding posts on both sides with thumbscrews. Use with banana plugs, spades or bare wire. A clean and tidy installation can be achieved by eliminating the wiring along your baseboards. Depending on the depth of the gang box, banana plugs can be accommodated on both sides of the plate at the same time.

Brand: Fosmon

👤The speakers were installed with an amplifier. I was going to leave the speaker wires poking through the wall, but this made the install much cleaner. This makes for a great combo with the low voltage single gang faceplate adapter. It would be better if it included the labels for L and R, but I have no complaints. Excellent product and fast shipping.

👤No matter what it will not fit, holes will not line up. Most standard wall plates have a cover diameter that is big. It's a long story. I'm not talking about drilling your own holes, I'm talking about the one with multiple positive feedback. Garbage product by Amazon. Garbage is selling on Amazon lately.

👤I wish it was different. I wish they had been deeper so you could use banana plugs. All of them are on both sides. When installing the outside ones, be careful not to push the ones on the inside out. It's probably what you did if there was no sound from the speakers.

👤The construction is solid and the thumb nuts are worth the money. Not junky at all. It's beautiful.

👤The color coding bands that identify cable polarity are easy to remove. A more secure color coding scheme is what they should provide.

👤These plates are great. If you like, you can use banana plugs on both sides. There is room for it. I used a banana connection from Fosmon. That may have helped.

👤It's easy to install. It would be better if the fixings fitted a conventional back box.

👤The design of the rear of the actual plate prevents this unit from getting as close to the wall as it should. The Decora plate sits off the wall because of the thickness of the low-voltage brackets. The brackets are made of fomon. The photos are on the Amazon page. The area around the mounting hole is the same as the rear edge of the Decora plate. The area around the hole is where the front of the low-voltage bracket is located. The wall cannot be touched by the Decora plate. The casting of the plate is too thick. The plates would be mounted on electrical boxes with their front edges below the surface of the drywall. It is legal for low-voltage applications.

👤It worked out as expected. It was used with the mounting brackets. The barrel is not long enough to allow banana plugs in both ends. The wire or spade connection must be on one side. I connected the in-wall side with bare wire.

👤Artikel is in the standard of amerikanischer standard. Hab 2 x 3 von den 5er ist immer. Blende fr Heimkino. There is antwort von dem Lieferanten. Ihren Hersteller sowas beispielsweise beispielsweise, beispiel 3er die as set angeboten ist...

👤Ho dovuto, giuntare un cavo audio dell'impianto Home Theatre. Ho semplicemente svitato le giunzioni e tramite 2. Non ho avuto variazioni. Soddisfatto. A banana e staccano agevolmente.

10. Cable Matters Triple Speaker Theater

Cable Matters Triple Speaker Theater

There are dual 5-inch foamed-mica reinforced woofers with wide-dispersion super tweeters. 3 gang 7.2 surround sound distribution wall plate can connect 7 speakers, 1 subwoofer and three devices with HDMI; install this audio video wall plate in a 3 gang low voltage mounting bracket for your home theater system; Speaker wire wall plate is 4.5 x 6.4 x 0.2 inches; mounting screws are The binding post on this 7.2 speaker wall plate has red terminals and can be used with banana plugs, spade connections, or bare 12 to 18 AWG speaker wires. Subwoofer wall plate with female couplers can be used to connect two RCA subwoofer cables hidden behind the wall. Common video resolutions include 4Kx2K (UHD), 3840x2160 and HD1080p. Home theater wall plates with gold-plated binding post and RCA connections provide a reliable connection and distribute authentic audio and video. The 7.2 speaker system wall plate has a lifetime warranty and is a professional looking installation. The 7.2 speaker system wall plate has a lifetime warranty and is a professional looking installation.

Brand: Cable Matters

👤I bought two sets of plates for speaker connections. Most speaker plates don't have an rcs connection for the subs and wouldn't work for me. These worked well for that purpose. Their white is a terrible match to Legrand. On Q. The plate is in an unfinished area in the basement, but in our great room they really stand out. I will have to remove the set in the great room and use individual keystones from Legrand to match. The Legrand keystone straps and wall plates are a perfect match for the Cable Matters Cat 6 keystones.

👤This product is poorly engineered. The plastic part that holds the metal terminals is too thick to fit against the wall. A very new person looks at the installation. I used the orange Carlon old work style open back brackets, which have an extremely this face plate, so that was not a problem. I tried to make it look professional by fussing with it for an hour. What a waste of time. I have a lot of electrical experience. This is a poor product.

👤The screws provided for installing into an electrical box were a joke. A tiny head that was stripped. I used the screws from the extra double gang blank cover plate. The face plate was fastened with the other screws. The most frustrating parts of Chinese products are the crappy screws. It must be a conspiracy to destroy the west.

👤I put my equipment in a closet. It can get complicated when you have surround sound. This makes it much easier to do. It would be great if it included the mounting brackets, but they are cheap.

👤It looks neat and professional, one time setup and saved time, I bought couple to use in my media room and living room, I need to switch my banana plugs.

👤It is easy to install and clear up messy wiring. I like this item because my HDMI cable tends to pull the connection out of alignment.

👤It was great for what I needed. I needed to have one speaker on the other side of the room and this was the one I found. It has a clean look. I painted a different wood wall plate to match the one on my wall.

👤I wish it had the option of jumbo sized outlets since you will most likely be cutting finished drywall to install them. romex is thick enough of a gauge to run behind the wall and stiff enough to run on its own. If you choose to use romex, be careful. Make sure the ground is cut back so you can't make a mistake. If they tailored this product to be compatible with romex or stranded wire, it would be 5 out of 5. If you overtighten, romex breaks easily.

👤I wanted something like this so that I could run the wiring for the speakers into a wall. The wall plate does a good job of presenting an attractive finish, and a dozen wires entering a wall can be attractive. I would buy more if the price were reasonable. I used screw-down terminations instead of banana plugs because I didn't want a wire to come loose and short. With 14 gauge wire, I was able to feed each conductor into the banana hole and bared wire out through the side hole, and then put it in place with the nut. This makes cable management easy and neat, and reduces the risk of interference and shorting between wires. There is limited thread under the nuts, so be careful how much you tighten them. I kept my fingers tight. Maybe an extra quarter-turn using grips. You will lose the threads if you go too far.

11. Fosmon Surround Distribution Speakers Subwoofers

Fosmon Surround Distribution Speakers Subwoofers

Plug and play connections, 3.5 MM aux to a wire. The 3-Gang 7.2 surround sound distribution wall plate is compatible with 4K@60Hz and supports HDMI 2.0. The high-speed connecting devices are made of gold. The wall plate has a gold plated connection. The HDMI wall plate from Fosmon is a clean connection point for your audio/visual equipment. hiding cables in your walls is a way to remove cable clutter. All of your sound is included. This wall plate can be used to set up a surround sound system. This product has a limited lifetime warranty. Refer to the website for more information.

Brand: Fosmon

👤The plate was straight to the point and made my home theatre connections so easy to manage that I can just plug the receiver into the jacks. Behind the wall, cable management is done. I can't speak for the quality of the HDMI ports because I used this opening for a 6-port Keystone plate which I then used for the CAT6a network ports. I only mention it because there is a use case for someone to swap the included HDMI ports for something else that works better in their situation. As long as you have a standard Keystone plate, this can be done. A different plate can be installed just as quickly. The reason I removed a star from the review was because the jacks on the item were not good. After installing everything and mounting it to the wall, I was hit with a constant bass signal coming out of my woofer. I knew it wasn't coming from a specific source since my receiver was off. I removed the wall plate and found that the jack on the inside had broken and the plastic plug had been pushed through to the back. The signal pin was shorting the cable because of this. I moved the cable to the second jack and it broke the first one. I decided not to return the plate because I had some extra keystones and jacks that I just removed and put in this wall plate. There were no more breaking issues after that. If you buy this product, keep an eye on the sub jacks as the plastic looked brittle and could break over time.

👤3 of these were ordered. Two of the three have bad HDMI connections. I tried different cables and tried another outlet. After all of the work, I returned what I thought were faulty cables, but only one of my three actually function. I am going to swap the HDMI gang outlet for another brand because the speaker connections work on all three of them. A lot of work, a lot of problems, and a lot of wasted time. 1/3 of my order price was returned by the company because the gang outlet didn't work. I would try them again in the future. The stars were from 2 to 5. Customer support is great.

👤I like the fact that I can get a 7.2 wiring into one location. I don't need the HDMI because I wouldn't be using it in the walls. The option to include another four-set of post for the plate would be better. I was able to find an insert with eight posts and swap out the HDMI insert for it. This is a nice plate if I only did 7.2.

👤The wall plate cleaned up my cables. The wires and cables were fished out of my walls and put into a cabinet. I could have just bought a wall plate with a large hole in it to save a few bucks but the plate really adds that extra touch making it look very professional. The 6.1 configuration includes the Front Left, Front Right, Center, Surround Left, and Sub Woofer. You can also hook up 2 cables. The left, center, and right panel are released by the 6 screws on the wall plate. The front plate will be put back on after the panels are screwed to the low voltage 3 gang brackets. I used the PROS clean plate from the 3 gang low voltage brackets. The plugs glide in smoothly and are high quality. There is a The HDMI port supports both audio and video. The banana posts were loose upon arrival. It was easy to fix with a pair of pliers.

Summary

What is the best product for home theater wall plate 7.2 atmos?

Home theater wall plate 7.2 atmos products from Vanco. In this article about home theater wall plate 7.2 atmos you can see why people choose the product. Construct Pro and Monoprice are also good brands to look for when you are finding home theater wall plate 7.2 atmos.

What are the best brands for home theater wall plate 7.2 atmos?

Vanco, Construct Pro and Monoprice are some of the best brands that chosen by people for home theater wall plate 7.2 atmos. Find the detail in this article. Acoustic Audio By Goldwood, Fosmon and Legrand are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com