Best Home Theater Wire Plate

Wire 9 Dec 2022 10+ Comments Open

1. JAVEX 16 Gauge Oxygen Free Amplifiers Receivers

JAVEX 16 Gauge Oxygen Free Amplifiers Receivers

JAVEX speaker wire has a high fidelity sound quality, stable signal frequencies, and is resistant tocorrosion. JAVEX, who has been providing speaker wire and cable products with excellent performance, is renowned and widely adopted over 40 countries worldwide. It is flexible, durable and reliable. The speaker wire has a smooth and flexible design. It helps to deliver high-quality and long- lasting undistorted signals connection in home A/V application as well as automotive, education or business set-ups. The wire structure isStranded and high-stranded copper ensures wire flexibility and transmission fidelity. The blue and black strap indication makes it easy to distinguish the two wires. JAVEX Speaker Wire is wrapped around a paper spool, making it easy to distribute. It is widely applicable to indoor and outdoor venues. JAVEX has professional customer service and product liability insurance. All products must be returned or refunds within 30 days.

Brand: Javex

👤Solid wires that feel like they are heavy-duty, great quality. I used this to wire my speaker system. I got a good hold on the banana plugs after the wires were stripped. The sound coming from my Maranz is great. Can't go wrong with this wire.

👤This is a premium product. Even a discriminating person will be happy. I use this with most of my builds. The wire assures that the music detail is reproduced correctly. The wire is easy to work with. You can expect good results soldering this product. The wire will last longer than the products.

👤I like the quality of this cable, especially the plastic insulation. It is very soft, yet tough, and is the standard "size" of speaker wires that has been in use for decades. The strand count of the copper wire is very good and the cable is very flexible. It looks like the cable should not stiffen up if it is cold or old. Flexibility andDurability are needed when using great wire. I think it is worth the price.

👤Excellent audio cable. The plastic jacket is very smooth and doesn't get caught on anything. It's easy to imprint memory if you need that for your wiring. I made 6 speaker cables with InstallGear open screw banana plugs and they worked great. The thicker the plastic jacket, the harder it is to slide the banana plug over the jacketed wire. If I removed the plastic circle, side entry/daisy-chain style is probably a more stable connection for this 14 gauge wire.

👤The proper gauge for main speakers is 10 feet away from your Amp. I don't think you can hear a difference between the two, but for some reason I spend more on the all copper wire.

👤The Javex 14g OFC wire is very well made, and has not yet been used in a home theater. Javex is a Taiwanese company who has been making audio cables for 40 years. The warranty is for one year. If you're on the fence, buy from this brand.

👤This product works as well as Blue Jean. The sound of the old school speakers is great. The cable is easy to use and I would buy it again.

👤There were no complaints about my purchase of the speaker wire. It was easy to remove the outer sleeve thanks to the integrated fabric string. The white color is good for running in exposed areas. It was relatively easy to form the runs I needed, though it did favor the original shape when given the chance.

👤The cable I received for my Denon RCD-M41DAB Micro System was not long enough for where I wanted to place my speakers, so I bought a cable that was suitable for 6 speakers. The Denon product was great even with the supplied cable, but when you add the Javex cable it makes it even better. The cable is thick and the Denon connection holes are small, but it is worth the effort. I am sure that some of the other amplifier manufacturers have larger connections, but you should do your homework first. I am glad I bought this product, it is a high quality product and highly recommended.

2. Fosmon Surround Distribution Speakers Subwoofers

Fosmon Surround Distribution Speakers Subwoofers

Plug and play connections, 3.5 MM aux to a wire. The 3-Gang 7.2 surround sound distribution wall plate is compatible with 4K@60Hz and supports HDMI 2.0. The high-speed connecting devices are made of gold. The wall plate has a gold plated connection. The HDMI wall plate from Fosmon is a clean connection point for your audio/visual equipment. hiding cables in your walls is a way to remove cable clutter. All of your sound is included. This wall plate can be used to set up a surround sound system. This product has a limited lifetime warranty. Refer to the website for more information.

Brand: Fosmon

👤The plate was straight to the point and made my home theatre connections so easy to manage that I can just plug the receiver into the jacks. Behind the wall, cable management is done. I can't speak for the quality of the HDMI ports because I used this opening for a 6-port Keystone plate which I then used for the CAT6a network ports. I only mention it because there is a use case for someone to swap the included HDMI ports for something else that works better in their situation. As long as you have a standard Keystone plate, this can be done. A different plate can be installed just as quickly. The reason I removed a star from the review was because the jacks on the item were not good. After installing everything and mounting it to the wall, I was hit with a constant bass signal coming out of my woofer. I knew it wasn't coming from a specific source since my receiver was off. I removed the wall plate and found that the jack on the inside had broken and the plastic plug had been pushed through to the back. The signal pin was shorting the cable because of this. I moved the cable to the second jack and it broke the first one. I decided not to return the plate because I had some extra keystones and jacks that I just removed and put in this wall plate. There were no more breaking issues after that. If you buy this product, keep an eye on the sub jacks as the plastic looked brittle and could break over time.

👤3 of these were ordered. Two of the three have bad HDMI connections. I tried different cables and tried another outlet. After all of the work, I returned what I thought were faulty cables, but only one of my three actually function. I am going to swap the HDMI gang outlet for another brand because the speaker connections work on all three of them. A lot of work, a lot of problems, and a lot of wasted time. 1/3 of my order price was returned by the company because the gang outlet didn't work. I would try them again in the future. The stars were from 2 to 5. Customer support is great.

👤I like the fact that I can get a 7.2 wiring into one location. I don't need the HDMI because I wouldn't be using it in the walls. The option to include another four-set of post for the plate would be better. I was able to find an insert with eight posts and swap out the HDMI insert for it. This is a nice plate if I only did 7.2.

👤The wall plate cleaned up my cables. The wires and cables were fished out of my walls and put into a cabinet. I could have just bought a wall plate with a large hole in it to save a few bucks but the plate really adds that extra touch making it look very professional. The 6.1 configuration includes the Front Left, Front Right, Center, Surround Left, and Sub Woofer. You can also hook up 2 cables. The left, center, and right panel are released by the 6 screws on the wall plate. The front plate will be put back on after the panels are screwed to the low voltage 3 gang brackets. I used the PROS clean plate from the 3 gang low voltage brackets. The plugs glide in smoothly and are high quality. There is a The HDMI port supports both audio and video. The banana posts were loose upon arrival. It was easy to fix with a pair of pliers.

3. Fosmon 2 Gang Surround Distribution Theater

Fosmon 2 Gang Surround Distribution Theater

Banana jacks don't work with dual banana plugs. Only works with banana plugs. The gang box/mounting brackets are not included. It is easy to install and remove with no special tools required. Standard gang boxes have mounts. A clean and tidy installation can be achieved by eliminating the wiring along your baseboards. The front plate has dedicated labeling. Use with banana plugs. Up to 5 speakers and a sub can be connected. Depending on the depth of the gang box, banana plugs can be accommodated on both sides of the plate at the same time.

Brand: Fosmon

👤The previous owner of my house had a lot of speaker cables hanging out of the wall. I had to place my sound system very close to the wall because the cables were so short. The cables were not labeled as to which wire they were connected to. The product solved all of the issues. I used a D-Cell battery and a multimeter with my daughter to determine the polarity of every wire. I could put it in the back of the plate and not have to think about it again. I was able to plug in the speaker into the sound system with the new speaker wire capped with banana plugs. I put pictures of the steps I took in my project in order for others to have the same success. The box has a hole in it's side that's opposite of the stud. The 1 gang box should be turned into a 2 gang by using a low voltage gang extender. I drilled a hole into the side of the outlet box to thread the speaker wires through. I figured out that the wires are in the same place. I screwed everything into the wall after attaching the speakers. I had a bad cut for my box extension, but I didn't use this product.

👤The painted screws are so thin that you can't see through the paint to the bag it came in, and the plastic is very old and clouded.

👤I bought a wall plate to connect my speakers. The product arrived in a box that was easy to open and start my installation in. If you choose, you can use one or both of the plates. Pick a single game outlet cover if you only need one for now. You can plug your wires into a place you can access with the help of the terminals. Banana plugs can be plugged into the back side as well as the front side. I wanted to use the F-connectors for my Coaxial cable connection. As this product is sold, you have a traditional RCA connection. If you want the sturdy and unmovable connection of a f-type screw on, then you will need to purchase a RCA to FTYPE adapter. I chose to buy it from the Amazon store.

👤The four mounting holes were not present in this one. I connected the speaker wires and discovered that it didn't have mounting holes. There were no holes in it. I bought the same one in the same year to install a 5.1 speaker sytem. There were mounting holes. Before hooking up the speaker wires, be sure to check that it has the mounting holes. I wasted 1/2 hour.

👤Single banana plugs can be used to make this fixture work. I wanted to use dual banana plugs, but the banana jacks on this unit are not on standard centers. The description on the website states that the posts aren't on centers. It took careful reading to find it. It would be great to make a bigger deal of that fact. I will be able to use the wall plate with single banana plugs.

4. Fosmon Surround Distribution Speakers Subwoofer

Fosmon Surround Distribution Speakers Subwoofer

The Multi-Purpose Cables Label is perfect for organizing cords. The gang box/mounting brackets are not included. It is easy to install and remove with no special tools required. The gang boxes have mounts on them. A clean and tidy installation can be achieved by eliminating the wiring along your baseboards. Matching binding posts on both sides with thumbscrews. 2 jacks. Up to 7 speakers and 2 subs can be connected. The front plate has dedicated labeling. Use with banana plugs. Depending on the depth of the gang box, banana plugs can be accommodated on both sides of the plate at the same time.

Brand: Fosmon

👤Since I was rebuilding the house, I decided to hide all the wires of my 5.2.4 system.

👤The problem is that the wall plate doesn't come with any white screws to mount to the standard 2-gang wall plate. If it stayed attached, it wouldn't be very durable, since they think you'll mount it directly to the wall. It's a mystery why the screws aren't included in the product. I am not the first person to review this model. They won't line up with most 2-gang boxes, but it would still be nice to have them.

👤The 7.2 Home Theater wall plate is very well made. The picture shows a 7.2 speaker wall plate, which is what the title description states. The price is pros. The cheapest 7.2 wall plate is well made, fits great with banana clips in-wall, and all necessary screw hardware is included. I used a label maker to label the ports the way I want them, and it works great. It was a great bang for your buck.

👤It was made well. If you need to spray paint the plastic plate a different color, the gold plated metal pieces can be removed and re-installed. The plugs fit neatly into the plate receptacle and are accepted for stranded speaker wire. The front and back of the plate have banana plugs or bare wires on them. Very pleased with appearance and performance. Would buy again. I have seen similar product at other stores and it was 2 to 3 times higher than at other stores.

👤You can get the same product in the stores for half the price. If you don't have the two gang back box, then you will need to make some wall modifications. The product itself was good, decent quality, and as good as anything I have purchased from Home Depot or Radio shack. Even if they had provided some labels for you to apply, it would have been better if you had a PC and a printer to make it.

👤There's not enough room for banana clips on both sides of the termination. If you push hard from one side, the tension on the other side will pop.

👤The hooks worked perfectly for my speaker system. I have a 5.1 system with 2 additional speakers in an adjacent room. I had a wiring mess. It's easy to install. Great look after. Really has a solid product. I connected my bare wire to the wall. I am using banana plugs. It makes a great connection between my receiver and speakers. My needs are slightly different so I bought the other side of my basement. Both products are great and would not hesitate to purchase them again.

👤I can't put banana plugs on both sides. I had to screw down a bare speaker wire connection on the back. I found that process annoying. I had to keep the wires short so that they would fit in the electrical box. The banana plug wouldn't go into it, so I had to drill out one of the plugs.

5. Fosmon Quad Speaker Theater Plate

Fosmon Quad Speaker Theater Plate

A high quality gold plated copper connection is built with Remium built. It is easy to install and remove with no special tools required. There is a color code. Matching binding posts on the front and back. Standard size gang boxes are not included. A clean and tidy installation can be achieved by eliminating the mess of wiring along the baseboards.

Brand: Fosmon

👤It was almost five stars. It seems that all of these products are made in the same Chinese factory. The quality is reasonable for the price. The one that fits with a standard Decora wall plate cover is different from the five speaker wall plate. If you are okay with using the supplied wall plate cover, you should use two of these instead of the five speaker product. Some reviewers report issues with stripped threads. The reviews are correct, but you should let the seller know. This happened to me when I used the five speaker product. Some banana plugs are too long to fit in the speaker receptacle. This issue has been encountered by other reviewers.

👤The product is easy to install. Make sure you have your wires spliced before you install the wall plate. I used banana plugs to connect the wires from the wall to the receiver.

👤I bought three of these Quad speaker units and ganged them together in a three gang assembly to create a 13 speaker interface behind my receiver. The middle unit was modified to provide a custom interface by exchanging the bottom two binding posts for two subwoofer posts. I am very happy with the quality and convenience of this product, and I can definitely recommend it.

👤I put two of these next to each other for an 8 speaker connection because they were easy to install. It works because movies sound amazing.

👤A hole in the wall allowed the speaker cable to come out. I don't have a problem with adding my own labels.

👤The connecting point for my surround sound speaker system was the wall plate. You think you are getting two of them in the picture. It is a front and back picture. Banana plugs can only be used on one side. The other side has to be hardwired. It made for a clean installation.

👤You can swap out a terminal for a coax easily. I ran a line to my amplifier. It's working great!

👤It works well and has a high density. I removed the plate from the wall cover because I wanted to use it with a wall box. The new wall box fit the Decor style plate perfectly. The cross threaded one did tighten down. If needed, I would buy again.

👤Plates cracked on the wall. The plugs are great.

👤A good product, but beware! The holes for securing the plate do not match the overall size of the plate. I drilled new holes in the wall plate, so you have to either buy a plate mounting separately or drill new holes in the wall plate. The description should state that fact. I have no complaints about the product at all.

👤The Terminal macht bei wertigen Eindruck. Ich ist das Terminal, so I have a problem with der Mae. Leerdosen ist das Terminal. Im Trockenbau ist das aber der Ausschnitt.

👤Quality control could be better because they look good and generally do the job. I had to use banana plugs inside the wall box because one of the locking nuts wouldn't tighten down on the wire I was using. The included screws are not the standard north american thread, but they were a fine thread and I had some left over from a previous reno.

6. Buyers Point Through Theater Systems

Buyers Point Through Theater Systems

A single brush wall plate can easily create cable access from any wall. Smooth and clean home theater installations. The Gang cable access strap works with all cable types. The brush is easy to set up and place on the wall. White/Ivory color matches your home.

Brand: Buyer's Point

👤These are made of high quality materials with excellent construction quality, but the design is not for a typical low-voltage installation. The "box" is only a frame placed into a cutout in the sheet rock and there is always a raised edge of the frame around the cutout not flush to the wall. The covers leave no room for the box frame to be placed over the wall. They would work perfectly if you could install a fully recessed box, but that can only happen with new construction.

👤The fibers are very rigid and seem to be high quality. I didn't notice until I installed them, but they use deep wall plates, so it protrudes from the wall more than a standard receptacle. If you put it next to a receptacle, you will notice it protrudes further and may be a consideration. The Carlon LV Old work brackets are not compatible with the wall plate. The wall plate had to be trimmed to be flush against the wall. I would like it to come with regular flat head screws for the wall plate. The fibers are held in by the brackets that use 4 clips. I thought I broke the clips when they became detached during install. I was able to get it back, but it could be a concern if you run a lot of cable through them. I don't think there will be an issue with this.

👤When I ordered it, I wasn't sure, but it turned out to be what I needed. It is a two piece assembly. The piece with the brush has a face the size of a light switch or receptacle. The second piece is a plate that screws onto the brush piece like a switch plate. The brush piece allows you to pass through a cable with virtually any type of connection at the end. The brush forms around the cable to hide something. I ordered a second one after I got the first one. The first one had instructions on how to install the brush wall plate using a low voltage mount. This would allow avoiding use of an electrical box if desired. I used a plastic electrical box to run the cables through low-voltage conduit, and the brush wall plate assembly still worked great. I removed the outer plate from the inner brush piece, which appeared to be one piece on arrival. I put the brush piece onto the electrical box after threading the cable through it. After threading the cable through the center of the outer plate, I attached the brush piece to the electrical box and voila, I was done. I read a review that advised against purchasing this item because it is not a split plate, meaning that the cable needs to be disconnected from the TV in order to use this wall plate. The review misses the point. The item claimed to allow you to install it without a cable. It does a great job of providing a more attractive solution than a hole in your wall with a cable coming out. I'm glad it wasn't a split plate since it looks better than a split plate and is likely more sturdy.

7. Fosmon HD8006 Surround Distribution Subwoofer

Fosmon HD8006 Surround Distribution Subwoofer

Conceal cables behind the wall in your media room for a professional looking installation and include a lifetime warranty for peace of mind. The Fosmon 3-Gang 7.1 surround sound distribution wall plate is compatible with 4K@60Hz. The high-speed connecting devices are made of gold. The wall plate has a gold plated connection. The HDMI wall plate from Fosmon is a clean connection point for your audio/visual equipment. hiding cables in your walls is a way to remove cable clutter. All of your sound is included. This wall plate can be used to set up a surround sound system. Banana jacks don't work with dual banana plugs. Only works with banana plugs.

Brand: Fosmon

👤The plate was straight to the point and made my home theatre connections so easy to manage that I can just plug the receiver into the jacks. Behind the wall, cable management is done. I can't speak for the quality of the HDMI ports because I used this opening for a 6-port Keystone plate which I then used for the CAT6a network ports. I only mention it because there is a use case for someone to swap the included HDMI ports for something else that works better in their situation. As long as you have a standard Keystone plate, this can be done. A different plate can be installed just as quickly. The reason I removed a star from the review was because the jacks on the item were not good. After installing everything and mounting it to the wall, I was hit with a constant bass signal coming out of my woofer. I knew it wasn't coming from a specific source since my receiver was off. I removed the wall plate and found that the jack on the inside had broken and the plastic plug had been pushed through to the back. The signal pin was shorting the cable because of this. I moved the cable to the second jack and it broke the first one. I decided not to return the plate because I had some extra keystones and jacks that I just removed and put in this wall plate. There were no more breaking issues after that. If you buy this product, keep an eye on the sub jacks as the plastic looked brittle and could break over time.

👤3 of these were ordered. Two of the three have bad HDMI connections. I tried different cables and tried another outlet. After all of the work, I returned what I thought were faulty cables, but only one of my three actually function. I am going to swap the HDMI gang outlet for another brand because the speaker connections work on all three of them. A lot of work, a lot of problems, and a lot of wasted time. 1/3 of my order price was returned by the company because the gang outlet didn't work. I would try them again in the future. The stars were from 2 to 5. Customer support is great.

👤I like the fact that I can get a 7.2 wiring into one location. I don't need the HDMI because I wouldn't be using it in the walls. The option to include another four-set of post for the plate would be better. I was able to find an insert with eight posts and swap out the HDMI insert for it. This is a nice plate if I only did 7.2.

👤The wall plate cleaned up my cables. The wires and cables were fished out of my walls and put into a cabinet. I could have just bought a wall plate with a large hole in it to save a few bucks but the plate really adds that extra touch making it look very professional. The 6.1 configuration includes the Front Left, Front Right, Center, Surround Left, and Sub Woofer. You can also hook up 2 cables. The left, center, and right panel are released by the 6 screws on the wall plate. The front plate will be put back on after the panels are screwed to the low voltage 3 gang brackets. I used the PROS clean plate from the 3 gang low voltage brackets. The plugs glide in smoothly and are high quality. There is a The HDMI port supports both audio and video. The banana posts were loose upon arrival. It was easy to fix with a pair of pliers.

8. VCE Single Voltage Mounting Bracket

VCE Single Voltage Mounting Bracket

The single brush wall plate cable pass through insert is very easy to use. Installation can be done in a few minutes. You just need to put the brush on the wall. It can run your cables through the wall. The package has mounting screws. The single gang mounting brackets are designed to mount wall plates flush. The plate is the same size as a standard outlet wall plate. It's a good idea to use old work boxes. The mounting holes are measured at 3.25", please comfirm the size before ordering. The package contains 2 x single brush wall plate and 2 x single gang low voltage. There are mounting pieces for plastic bags.

Brand: Vce

👤If you follow these steps, you will be fine. The quality of the product is good. The box it was in did not have instructions in it. If you follow my steps and get a clean finish, you can overcome the fear of completing this small task. 1. No template was included for cutouts. I traced the outline of the cover plate with a pencil. I traced a square on the inside of the mounting frame. You can see my marks. 2. To cut out the inside square from the wall, use a jab saw. It's a tip. Place your blade on the inside of the trace line when you start cutting. The cutout piece may fall inside the wall if removed as needed. Once the piece is removed, dry fit the mounting frame and work the cutline as needed until the frame goes in. The exit cutout should be the same. 3. Remove the mounting frames and place them on the side. It's time to run your wires. The wires should be visible at the exit opening. Fish tape can be used to help with this task. It's a tip. If your flat screen has a short cord, you should use a long extension cord. Attach the extension to the monitor AC and pull it through the wall once the monitor is hung on the mount. The mounting frame needs to be installed now that the wires have passed through the wall. 5. Also, note: The plastic wing should be extended towards the end of the screw to clear the drywall depth. The plastic wing needs to be snug up to the wall. Be careful not to break the wing. 6. The brush cover needs to be installed. It's a tip. As the screws of the brush holder get tighter, use a level to snug them up. The square cover will be guaranteed by this. There are 8. The cover plate needs to be installed over the brush mount.

👤I have these in a few different places in my house and they are clean and professional. There is a neon light sign in the basement bar area. The power cord is on the other side of the wall. The other is for the sub-woofer cable going into the closet. There is a The last place to run the cables is through the wall. The mount is very easy to install. Put it against the wall and use a pencil to trace the area. Cut out the wallboard with a saw. The two screws need to be tightened. You are done if you screw the white faceplate to the brackets. It was easy. If I ever need them, I'll buy them again.

👤I only needed two of these in black so finding a listing for a decent price gave me limited options. I won't be looking at them or removing them often because they sit behind the TV. They are made from plastic that is 3d-printed. It was very flimsy. It does get the job done, but two of these for 13-15 dollars seems a bit much for what you get. I have moved on despite the fact that it got the job done.

9. Through Network Coaxial Theater Systems

Through Network Coaxial Theater Systems

You can no longer be disturbed by messy cables if you pass through a brush wall plate cable. Provide a clean and tidy home. The brush plate and soft brush are made of flame-retardant plastic and will not damage the cable. A long service life. Only a standard screwdriver is required to complete the installation. The standard size is 4.5 inches. Can be used with a low voltage mount. Speaker wires, HDMI, Coaxial cables, telephone, Network and Audio video cables are suitable for home installation. 24 hours efficient and friendly customer service is what you get with the 2-pack 1-gang brush wall plate.

Brand: Ukyee

👤The item is a single wall plate, but it has inserts. My plan was to buy the pair and put them in a duplex box and use a standard double gang decora cover. The inserts are too wide and can't be used in a double gang. There is no flexibility for application despite the great product.

👤The wall plate was perfect. There was a hole behind the tv. The plate covered the hole. Who knows how many bugs came through before? There are no gaps because the fibers fit around the cables.

👤If you're installing in a 2 gang box, the standard faceplate won't fit without widening the opening.

👤This is a great product. I would recommend this product to anyone. Most definitely, 5-stars.

👤It has a couple of audio and 12v signal cables. It made a noticeable change in room temperature with the help of the brushes. Would definitely recommend.

10. Fosmon Home Theater Wall Plate

Fosmon Home Theater Wall Plate

The gang box/mounting brackets are not included. It is easy to install and remove with no special tools required. Standard gang boxes have mounts. Matching binding posts on both sides with thumbscrews. Use with banana plugs, spades or bare wire. A clean and tidy installation can be achieved by eliminating the wiring along your baseboards. Depending on the depth of the gang box, banana plugs can be accommodated on both sides of the plate at the same time.

Brand: Fosmon

👤The speakers were installed with an amplifier. I was going to leave the speaker wires poking through the wall, but this made the install much cleaner. This makes for a great combo with the low voltage single gang faceplate adapter. It would be better if it included the labels for L and R, but I have no complaints. Excellent product and fast shipping.

👤No matter what it will not fit, holes will not line up. Most standard wall plates have a cover diameter that is big. It's a long story. I'm not talking about drilling your own holes, I'm talking about the one with multiple positive feedback. Garbage product by Amazon. Garbage is selling on Amazon lately.

👤I wish it was different. I wish they had been deeper so you could use banana plugs. All of them are on both sides. When installing the outside ones, be careful not to push the ones on the inside out. It's probably what you did if there was no sound from the speakers.

👤The construction is solid and the thumb nuts are worth the money. Not junky at all. It's beautiful.

👤The color coding bands that identify cable polarity are easy to remove. A more secure color coding scheme is what they should provide.

👤These plates are great. If you like, you can use banana plugs on both sides. There is room for it. I used a banana connection from Fosmon. That may have helped.

👤It's easy to install. It would be better if the fixings fitted a conventional back box.

👤The design of the rear of the actual plate prevents this unit from getting as close to the wall as it should. The Decora plate sits off the wall because of the thickness of the low-voltage brackets. The brackets are made of fomon. The photos are on the Amazon page. The area around the mounting hole is the same as the rear edge of the Decora plate. The area around the hole is where the front of the low-voltage bracket is located. The wall cannot be touched by the Decora plate. The casting of the plate is too thick. The plates would be mounted on electrical boxes with their front edges below the surface of the drywall. It is legal for low-voltage applications.

👤It worked out as expected. It was used with the mounting brackets. The barrel is not long enough to allow banana plugs in both ends. The wire or spade connection must be on one side. I connected the in-wall side with bare wire.

👤Artikel is in the standard of amerikanischer standard. Hab 2 x 3 von den 5er ist immer. Blende fr Heimkino. There is antwort von dem Lieferanten. Ihren Hersteller sowas beispielsweise beispielsweise, beispiel 3er die as set angeboten ist...

👤Ho dovuto, giuntare un cavo audio dell'impianto Home Theatre. Ho semplicemente svitato le giunzioni e tramite 2. Non ho avuto variazioni. Soddisfatto. A banana e staccano agevolmente.

11. WGGE WG 009 Banana Connectors Speaker

WGGE WG 009 Banana Connectors Speaker

The same size as a standard outlet wall plate. Old work boxes or Carlon brackets should be used. Please confirm the size of the mounting holes before ordering. A crystal clear signal is provided by the 24k Gold dual screw lock speaker accessory. The wires are isolated and the two set screws keep the connection secure. W&G Global Electronics Inc. is the seller. Installation is easy. The banana plugs make speaker wire installation easy and are great for surround sound systems. Pure copper is non-magnetic. The color code is gold. The collar of the Banana is colorcoded for polarity identification and is gold plated to resistcorrosion. There are multiple sizes of speaker wire. Accepts wire up to 4mm. It accepts 12 AWG to 18 AWG speaker wire. There were no screws soldering. Banana Plugs come with an 18 month warranty.

Brand: Wgge

👤I was not crazy about them arriving in a nondescript bag with a bunch of halloween candy. I know they won't be seen. I don't want them to be scratched up from jingling in a bag for days just to get to my doorstep. That is just the beginning. I put the pieces together to see if they were all there. Some of the sheaths have black branding. So you know the direction of each end. I had more black sheaths than red. The sheaths have branding for 3 different companies. Some have a chrome finish while others have a matt finish. I lined them up to take a picture. The brands that I noticed were: Nakamichi, Ytuomzi, and WGGE. So! I have a mismatch set of sheaths, but what about the banana tips? I noticed they have different amounts of thread on them and one of them had no tip so that puts me down to 23 of the 24 even being usable. The set screws are the last. Many of the set screws have the tips broken off. Some look like they snapped under pressure, others look like they were bad castings, and others look like they were grinded down. If you could, it would be a nightmare to use them. I am returning these and buying from a different brand because the equation is not correct. Be careful.

👤If possible, I would give 10 stars. The design is very easy to install. It was used to connect the speakers to the receiver. Used 14 gage copper wire. I did what I was told. 1. Stripped wire is at least 2 inches. The center piece of the banana plugs was removed. 3. The two small screws were loosened. 4. The wire was put in until the center piece was insulated. Tightened the screws. The middle part was put in the outer cover. All done. I want to thank the manufacturer for the design.

👤When you need to have dual lock screws per every connector, these are great banana plugs. I used a true 10AWG high quality Oxygen Free Copper dual wiring cable and found that these will work with 10AWG size as long as you don't have the twist on covers that you normally add as the last step. Most of the time they are so tight a fit that you can't put on the covers with the red vice black labels because they are not able to fit over the set screws. The wire is so tight that the set screws stick out from under the snug fit for the identifying covers to be twisted into place. I don't have true 8AWG wire to test, but I am certain that even if you can get the wire to fit and set screws in place, there is absolutely no way that the identification covers on, much less tighten or twist them into place. The two set screw banana plugs are almost universally not allowed to be larger than 10AWG and most of them don't work well with 10AWG wires. If you are going to buy the largest set with 24 connections, these are an excellent value. Installation will be easier if you have wire less than 10AWG. The smaller the wire, the better.

Summary

What is the best product for home theater wire plate?

Home theater wire plate products from Javex. In this article about home theater wire plate you can see why people choose the product. Fosmon and Buyer's Point are also good brands to look for when you are finding home theater wire plate.

What are the best brands for home theater wire plate?

Javex, Fosmon and Buyer's Point are some of the best brands that chosen by people for home theater wire plate. Find the detail in this article. Vce, Ukyee and Wgge are also brands that their products are worth to check.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com