Satellite speakers or bookshelf speakers are all kinds of wall mounted speakers. The curved face is designed for cube-style speakers. The ball and clamp design makes it easier to mount. Attaches to the speaker's mounting points. The thread size is 1/2-20. It's perfect for indoor or outdoor use.
👤It does not come with screws and anchors to install it to the wall, but it is very high quality. A $1 up the price. I am fine paying the difference instead of going to a local store to buy the rest of the materials. The screws which I used were not the original size, but they are sitting well, but at the same time they have a %5 shake, which is an uncomfortable feeling after installing these. It's an ultimate alternative to best buy or other local store hangers. It was necessary to fit it into my speakers. This product is recommended by me.
👤The Polk Audio Signature series S10 speakers are mounted on these. I tried to mount one using plastic drywall anchors, but I was not happy with the bulge in the wall. I recommend only mounting the brackets via wall studs after shifting over 4 inches to find a wall stud. The easiest way to remove the ball mount is to loosen the pinch bolt, then install the ball to the speaker, and then use the supplied key to tighten the mount. Make sure the ball is clean and free of oil so it doesn't slip into the clamp. The mounts are sturdy and offer flexibility in aiming the speaker. I believe the documentation states they have a 10 lbs limit. They mount close to the wall and disappear when a speaker is in front of them. I would recommend them for any speaker needs.
👤I knew from previous reviews that I would need to use screws or anchors, but I didn't know that the screws I already have for the EZ Anchors wouldn't fit on this mount. I used other less desirable anchor that I had. Since the speaker mounting holes are at the bottom of the speaker but can work for any speaker, the 5mm allen wrench included is too short to fit in the long side of the allen wrench needed for fastening. The mounting hole on the back of the speakers is in the middle. I turned the speakers sideways but it was still difficult to get to them. I ordered a 5mm Allen wrench for the Martin acoustic guitars. This wrench is long on both sides of the right angle, which made it long enough to reach the wall mount behind the speaker, and long enough on the other side to make the fastening tight. The product is made of metal. If they just supplied you with the anchors, you could use the supplied screws with the anchor in the stud or in the drywall, it would be much better. There is a If you are using this on any speaker other than a technology speaker, you should buy the 5mm longer allen wrench. This is the one I got.
👤These mounts are very good. They were easy to install, heavy duty, and the ball swivel works as advertised. I put my Polk OWM3s on my ceiling. The price point is very good. Can't forget that.
The package includes a wall mount, a metal ring, a long screw, anchor, and two sticky anti-slip strips. A table stand for speakers. If you want the best audio experience, position your speaker securely on your table, desk, counter or any other flat surface. This speaker desk stand is only made for the Play:1 and 3 wireless speakers. The speaker position can be adjusted with the help of the full motion table stand, it can tilt up to 10 degrees and down to 180 degrees. Attach the stand to the speaker and place it anywhere in the house. It's perfect on cabinets and shelves. Vogel's has a 5-year product warranty, and has more than 45 years of experience designing and manufacturing mounts for entertainment electronics.
👤Excellent idea, well made and quality. I bought one to elevate on my Play 1s. I paid $25 for it when I got it. Two pieces of plastic and eight rubber feet are all that is needed for a simple device. I haven't tried it with my Play 3s because it works well for elevation, but it works well with the Sonos One and Play1. The One and Play 1 fit perfectly on it. A lot of this stuff is sold on Amazon. Five stars for design, execution and quality. The plastic used is of the same quality as the speakers. The color is perfect in either white or black. I wanted to elevate a couple of the other Sonos that I had, so I bought two more ones in white and black. I'm considering buying two more Play 3s. I took away one star because it's very expensive. There is no discount for buying two at the same time, like many other add-on items. If they offered two for 19.95, I wouldn't think twice.
👤I set them up immediately after I received them. The stand does what it says. Assembly is easy since the stand is just two pieces of plastic. The speaker is held in place by a foam rubber disc on the underside of the top piece. It has rubber feet that you have to push on the bottom to give it traction. The speaker sits on the top piece and on the bottom piece. If the foam rubber doesn't hold the speaker in place, it's time to replace it. I don't think it will. I will need to keep an eye on that. I think the price is silly. Twenty-five dollars? No. If I knew what they were like, I wouldn't have bought them. A more reasonable price point would be between 15 and 20. There is a If you can get these for less than $20, I would recommend it.
👤I am very happy with this purchase. I used my stands differently than other photos and descriptions. I put the speakers on top of the cabinets in the kitchen. They are very high and aim high. I was able to point the speaker in a down position with these stands. It works well.
👤I only give it four stars because I don't want my speaker to fall if it were to. I would think that there were plastic clips that could be used to snap the speaker in place. It gets the player off the furniture and I think the sound is better.
👤It is a good idea to keep your speakers off the table because it protects them from spills. It's two pieces of plastic with rubber feet that protect the furniture that you have the speaker set on. I use them as my rear speakers on my 5.1 Playbar setup. No sound degradation or rattles using these. The price for what is in the box is pretty steep. The product would have been great if it were less than 15 dollars, but the rating had to be knocked down because of the cost.
The speaker will fit if it has a single rear entry fitting with M5 metric threads. The sound bar center speaker mount brackets are universal and can be mounted on any wall. It's ideal for home theaters, offices, living rooms, bedrooms, studios, schools, dorms, events, houses, public areas, hotels, lobbies, etc. The arms will extend from the wall. You can create a concert hall sound quality from the comfort of your home, office, public areas. Sturdy construction. A sleek black coat is used to complement the modern design. Max. The capacity is 30 lbs. Installation: Attach the Speaker Holders to the wall in a few minutes. The package includes dual brackets, a mounting hardware kit, and a user manual.
👤The speaker protrudes from the wall about 11 inches. I left a floating shelf at my old house, but I couldn't find it. I got something that got the job done but I was a little disappointed. I had high hopes when I mounted them. The speaker was put on them despite the fact that the vertical surfaces are still vertical. The material can not handle the weight. If you are not looking for it, it is slight. I notice it every once in a while and it makes me angry. If you have something lighter, you will be fine. If you are a perfectionist, look for something that is strong.
👤I wanted my center speaker to be the same height as my tower speakers. These were a no-brainer because of price and simplicity. One arm was bolted to a stud and the other to a wall using the included anchors. My speaker is 25 pounds. They included rubber sticky pads that you stick to the support arms. These are perfect for what I needed. The speaker mount is simple and secure. Pictures of before and after installation are included to help you make a decision. Have a great day!
👤Just received mine. Very sturdy. It was installed in minutes. There is a warning. The wall anchors are not for dry wall. The instructions should be read. There is a If you're going to install on a dry wall, you should buy a set of anchors for $2 at the home depot.
👤I put my TV on the wall. I wanted to mount the sound bar as well. I decided to give these a try. The brackets are strong. You can shorten them by removing a piece on each one. I own a sound bar. Even though the piece that allows it to be shorter is gone, the brackets are still a little longer. The bar is about an inch and a half from the front. I push the sound bar a little further toward the brackets. I really like it. I was happy with the results once I mounted the TV. You use the included allen wrench to loosen up the tension so that you can adjust the length or remove the one piece.
👤The mount is strong and holds my channel securely. I went to the hardware store to get the proper hardware to mount it. The plastic anchors were useless. It wouldn't hold much more weight than the mount. The screws were working well, but the plastic anchors were not. I bought a type of anchor that goes through the wall and has a metal T that pulls against the inside of the wall. Things were very secure because of that. The legs are longer than advertised. Some reviews said it wouldn't go down to the lowest advertised setting, but if you set it correctly it will. The speaker's legs and feet are large enough to be sturdy and the speaker sets them top of them. You have to decide if that look is bothering you. I like it because it matches my speaker and looks ok.
There is a secure locking system. The speakers weighing up to 75 lbs can be supported by the secure locking screws, but they can interfere with the performance of your stereo set up. Capable to support up to 11 lbs, ideal for home, gaming zone, kitchen, RV, workout room, bedroom, and more. For the perfect sounding angle, there is a tilt and a swivel. 90 degrees left to right and 20 degrees up and down are needed to achieve an optimum speaker aiming. The speaker wall mount set includes a full installation kit. One pair of speakers with single threaded insert fitting. A strong supportive base is provided by a reliable heavy-duty plastic construction. Designed for all small theater/ cinema style satellite speakers and fit many brands. Designed for all small theater/ cinema style satellite speakers and fit many brands.
👤The mounts allowed me to wall mount my speakers to get the best sound possible. They're small, effective and not unattractive. If your speakers are heavy, you're going to need wood screws that are 2 inches long. My speakers were not loud. I used my own hardware. The speaker mounting screws were not compatible with the speakers. I was able to use my existing screws to Thread through one of the pre-drilled holes. It's not an exact fit, but it's good enough. I would include a version of these with all their home theater systems so the customer could take full advantage of what the sound system is designed to do. You need the flexibility of 20 degrees up or down and 90 degrees left or right in every room. If you have large hands, it might be difficult to secure your speakers to the mounts because of the exposed wires.
👤It is amazing! The design works well for my needs. I used this to mount two rear speakers of my Vizio 5.1.2 Soundbar system on the ceiling and wall. Strong fingers are needed to tighten it. I didn't like the screws that came with it. The finish is too shiny for the black look of the mount. I used black screws. I recommend using washers to prevent overtightening of the screws, which could cause damage to the mount. There are no gaps on either side of the screw heads, so adding washers made it look more professional. The speakers came with screws that I had to use to attach them to the mount. The mount was too thick for this purpose.
👤The speaker brackets are sturdy and easy to install, I'm considering adding another set of speakers to my home theater, and there is no question as to which wall mount brackets I will use. I will refer this product to my friends and family.
👤It's good for smaller satellite speakers. I've been using them for a while. One of them creates a buzzing sound. The speaker stopped working when I tightened the holder. I only had to retighten once a few weeks, but now it's every few days.
👤Can I give this a rating of 6 stars? This design takes just a few minutes to install. The rear satellite speakers have a small thread for the mount, which is unusual for a sound bar. The mounting hardware that came with the speakers fit perfectly, even though the screws that came with these mounts didn't fit. For the price, this is a must have for mounting smaller speakers.
👤They read my review and sent me the screws. Fantastic customer service. Thank you. Even though the instructions reference the parts, it came with brackets, no screws or hardware.
👤They work and are ok to use, but I had to mount my speakers upside down to use them.
👤I was not expecting much for $10 but it was a home run for me. Attaching the speaker to the wall with couple wall anchors and couple screw's. To tighten it down, dial in the right angle. Done deal! 10 outta 10 would be good for smaller speakers.
The brackets for the dual sound bookshelf satellite speaker mount are compatible with brick and stone walls. Max. 55 lbs (25 lbs) is the capacity. The speaker should be between 6 and 11 inches in width and between 45 and 7.5 degrees in tilt. The sleek knob design is complemented by a sleek reinforced black coat for a contemporary appearance. The mount to the wall is sturdy because of the metal inner construction. Customer support is available to assist 7 days a week, and the package includes 2 x WALI Speaker Wall Mount brackets, 1 x mounting hardware kit, and a User Manual.
👤The WALI bookshelf speaker wall mounts were purchased for a large set of speakers. The speakers weigh about 35 lbs. Each pair weighs 18 lbs. Each speaker. Selecting a wall mount that could support their weight was a concern. I wanted something that wouldn't fall out of the wall. I didn't want to put support screws into the speaker to make sure it stays on the wall mount. I wanted to keep them that way. I decided to purchase the WALI brand mostly because of the positive reviews, after careful research of all mounting brackets on Amazon. I'm very happy that I did. I installed the mounts yesterday. They need to be installed in wall studs. Hardware is supplied for brick and wood mounts. They don't allow mounting into metal studs or concrete blocks. You will have to provide your own mounting solution. The speakers were mounted straight forward. Use a stud finder to locate the stud, place the mounting plate on the wall location, mark the holes, drill small pilot holes, then screw the plates into the studs. There are two screw holes in the plate. One is high enough to use a drill to install a screw. The support arm has a screw close to it. My drill was too big to drive the screw. The screw had to be manually screwed. The mounting hole by the support arm needs a pilot hole. The speaker is held on the mount in a way that I was very pleased to see. The speaker will sit on one side of the screw, the other side will be adjusted. The screws are loosened to move the clamps in and out. Pressure is used to hold the speaker. After I tightened the mount and placed the speaker on it, it held up perfectly. The speaker was held with no problem because the clamp was tight. The speakers are mounted on a flat surface. I didn't find it necessary to use the screw holes on the clamp to drive the screws into the speakers. The speaker mounts provide the screws for this. You don't have to purchase the screws if you need to install them with the added screw support. I'm very pleased with the product. The supports are made with thick metal, all the hardware is provided, and the speakers are held in place. The price is excellent. What more could I ask for?
👤I have a pair of bookshelf speakers that are approximately 15” tall by 9” deep and 8” wide. Each speaker weighs 30 pounds and has wood cabinets. I don't want to drill holes on the cabinets for wood screws in order to keep the speakers in place. I wanted the bookshelf speakers to be mounted high enough on the wall so that anyone could easily walk under them. They would be tilted down about 3 and would be left or right towards the listening area. The speaker mount system works well, I noticed that the mechanisms are designed well. The left and right steel clamps are independent of each other and each has its own screw to extend or withdraw the arms. The strip of soft but firm rubber material on each clamp is what makes the actual contact with the speaker cabinet. The speaker can rest on the strip of rubber on the heel of the base. I had a look at the holding and power capabilities of the system before mounting the brackets. I was pretty sure that the Wali speaker mounts would be able to hold bookshelf speakers that were twice as heavy as mine, but Wali specifies a max weight of 55 lbs. The brackets came with everything needed to put them on the wall. They aren't meant for installation to a ceiling. I used a stud finder to make sure I had at least 2 screws in the studs, and it was easy to mount them to the wall. They lost a star with me because the wall mounts came with 8 plastic, wall anchors. They supplied heavy-duty wall anchors. The design didn't include "torque spikes" in the flange, which would be embedded into the sheet rock, to prevent them from spinning as you Torqued the screws. I use a lot of light and heavy-duty wall anchors to hang pictures, lights, and other heavy items. Most of the heavy-duty wall anchors I have used have these spikes in the flange so they don't spin as the screw begins. I tried four of them and used my metal, spiral-styled, heavy-duty, wall anchors as replacements after giving up on them. I was very impressed with the Wali Bookshelf Speaker Mounts, not only because of how well designed they were, but also because of the ease of installation. The speaker mounts look nice and are easy on the eye thanks to the supplied brackets. I would have given them 5 stars if it wasn't for the poor design of the plastic wall anchors. I would recommend these speaker mounts to anyone, as they hold my speakers in place. I plan to mount another set of bookshelf speakers in another room and I will probably buy 2 more pairs of these mounts soon. Rich.
Customer support is available to assist 7 days a week, and the package includes 4 x WALI Speaker Wall Mount brackets, 1 x mounting hardware kit, and a User Manual. The speakers in the set weigh up to 22 lbs. Each. All necessary mounting hardware is included. Speaker brackets have a ball jointed screw. The speakers that lack a native mounting point will need a keyhole to a different size. Monoprice rugged design and rigid quality control standards deliver high quality products at fair prices.
👤The speaker wall mount system comes with an incredible amount of hardware, which can be fastened to different types of speakers. The mounts are very easy to adjust with the ball mounts and huge turn screws. These speaker wall mounts weigh 10 lbs. and I have mounted my Definitive 1000's with them. Each They are solid on the wall. Even sideways and down, there was no problem.
👤I bought this kit for the ability to mount on a wall. The Video Secu kit was used to mount my previous surround speakers. The kit was very unstable for my new speakers, and I pictured it as having provisions for mounting keyhole. The kit came with a more robust plate. The larger plate allows you to more firmly and evenly secure the back of the speaker. The Video Secu base is made from metal, not plastic, so I screwed it into the wall. I put the new plate on the existing ball mount. I trimmed the threads coming off the ball to make them shorter. The speakers stick out from the wall if you don't modify it. The manufacturer's hanging solution is more expensive than buying both kits. If you change speakers frequently, buy both kits. This kit is for keyhole mounts. The Video Secu is the place to go if you have threaded speakers.
👤Monoprice is usually a good product, but it is not made for 22 lbs. I got it to work for my speakers with a modification and lots of frustration. I wanted to make it work before I sent it back. I sawed off the threaded mounting-bolt to make it easier to put the brackets against the ball joint. My speaker bent the long threaded-bolt. The placement of the ball-joint is painful. The ball joint will move out of position when you tighten the triangular screw. Try to match the 45' angle plus tilted down on the other speaker. You have to tighten it extremely each time, I thought it would strip the threads honestly. If you don't tighten it tight, my speaker loosened down the ball joint. I should've known that a ball joint isn't appropriate for a heavy speaker. There is a I should have checked the Monoprice reviews. These are good for light speakers, but not very heavy. It's definitely not 22 lbs.
👤My speakers weigh 7 pounds. They are about 12 inches long and 6 inches wide. The instructions were poor, there were missing screws, and the screws on this were 2.2 inches apart and missed the stud by a mile. I bought these mounts to be able to tilt and turn with the ball joint. The ball joint couldn't stay in position with only 8 pound speakers because it barely moved in any direction. The instructions for installing the metal plate on my speakers moved out of place. The ball joint is supposed to be straight out. This isn't mentioned in the instructions. This was impossible as it wouldn't stay straight. The dumb mounting plate wasn't holding position with the swivel, so it bent the mounting brackets on my speaker. The speakers are not damaged. I need to buy a new mounting bracket. I'm returning the product.
It is easy to install with 2 anti-slip strips and complete hardware kit, you can be sure that your soundbar won't fall off easily. The mount is made from tough metal materials and can be used for most sound bars, as well as being mounted on any wall. Everything you need to mount your speaker system is included in the value pack. It's perfect for use with an array of walls that allow for drilling. The ideal fit. The brackets are a perfect fit for the system. Sturdy and made to last, mounts flush to your wall. The package includes a wall mount, a metal ring, a long screw, anchor, and two sticky anti-slip strips.
👤The mounts look great on my wall. I wanted to make a clean looking entertainment center after I bought a new tv, and I needed a mount to put my new tv on. I wanted to get my device off the floor so it wouldn't get damaged. The mount made it very easy to get it up off the floor and onto the wall, it has mount brackets that can be drilled into a stud or cane with drywall anchors to hold them up onto the wall. If you need to take them down fast, you can slide them on and off.
👤If you want to get one of the aluminum mounting washers, you should not bother with this. They are vastly different, yet should be the same, and one doesn't fit in the slot. I wouldn't have spent money on a tool if I wanted to cut my own metal. Garbage.
👤Installation was easy, mounts are sturdy, and the tape was adequate. These mounts will likely support more weight than my sound-bar and give me more confidence to hold my sound-bar for years to come.
👤The brackets were easy to follow. You are going to have difficulty if you have little mecanical skills. You need to demonstrate your ability to use a tape measure. You need to own them. The application takes some work, but the brackets fit most of the soundbars. The price is reasonable.
👤I used double sided tape on the sound bar mounts to keep it stable. The cat does not get knocked down when it jumps on the sound bar. Most sound bars have appropriate mounts.
👤The L brackets are heavy duty. The only thing you need is a package of 2. Everything you need to give your speakers.
👤They are great for mounting a sound bar. I gave this item 5 stars because it's so strong that it becomes a permanent part of your system if you don't get the soundbar mounted perfectly the first time.
👤Does the job. It's perfect for any TV. Installation is easy to understand. The double-sided tape looks clean.
It's easy to connect. Their speakers can be used to connect to your TV, PC or laptop. Powerful 30W speakers. The speaker system provides a sound that fills the room. Light illuminates your space and enhances your home theater. You can use the buttons on the sound bar to adjust the volume, play music or switch mode. Different colors of indicators mean different modes. You can stream your favorite music from your phone, tablet, or other device. Sits below the TV or securely mounts on the wall.
👤It looks cool. It was too quiet and my tv speakers sounded better since it looked cool with the lights.
👤The price is good and it looks cool. It works well, but it doesn't get as loud as I would like it to.
👤If you have a sleek TV it is almost necessary to have a separate sound system. TVs are thin with no room for large speakers. The speakers are usually on the back. The Monster Soundbar has a low-profile and comes with a remote control that can be used to power on, volume, play, pause, switch between lighting colors and modes, inputs and Bluetooth. The unit has some control built into it. The sounbar can be placed under the TV or on the wall. It could connect via the AUX port. The Monster Soundbar has several color options and mode selections. You could pick a color or pick a wave. The remote has controllable dimmer settings. The sound of my TV is better than that of the soundbar. I was expecting a Monster sound bar with a name like Monster to create a better audio experience than the tiny speakers on the back of the TV. I have a portable speaker with a bigger sound and a better bass than this one. There are similar priced units with better sound. Some of them have a separate sub, or have a HDMI port for music from an external drive. The Monster Soundbar is mostly for TVs. It is too wide to fit on many desks and it worked better as a PC speaker. Sound and lighting should be more important than they are.
👤I wanted to put it over my monitor. The sound from the speakers was very good. The stereo is great because of the wide separation. This is not very useful for use with a TV in a small room. If my PC is off, I loved the convenience of using a phone or iPod with my computer. It's easy to pair. I had to provide my own cable at a small price, and it was almost as good as the one that BT provides. The sound is clear and loud enough for me to sit at my computer desk. Not a lot of Bass. 2 screws and anchors are provided for the mounting. It can sit under a TV. If you don't try for a tight screw to the soundbar back, it will lean down a bit. If mounted to the wall like I did, it will aim the sound down a bit. The lighting is bright, multicolored, and can be set with the remote control from off to on in many patterns and color schemes. I provided my own batteries for the remote, which will control the inputs and play. A small wall wart provides Soundbar power. The instructions are very good. I love the improvement over my monitor speakers. I recommend this Monster Store Soundbar: Home Theater with Multicolor Led Lights, 30W Speakers, Remote Control, and Optical AUX Connection. It's ideal for close up use with my PC. I hope you find the information helpful.
Sound bookshelf satellite speaker mount brackets are compatible with brick and stone walls. Max. The capacity is 7.7 lbs. Versatility includes tilt up and down 20 degrees, left and right 70 degrees. The sleek knob design is complemented by a sleek reinforced black coat for a contemporary appearance. The mount to the wall is sturdy because of the metal inner construction. Customer support is available to assist 7 days a week, and the package includes 4 x WALI Speaker Wall Mount brackets, 1 x mounting hardware kit, and a User Manual.
👤The good is that installing metal wall plate with two screws is easy and includes all the hardware to install. The speaker bends the brackets a bit. I was able to angle the speakers down so it was ok for me. If you want them to be level, you may run into issues with the plastic. I wouldn't recommend pushing the recommended maximum weight, usually things are over engineered to hold more weight than stated but I wouldn't trust that here. The speaker thread mounting screws seem to be too small for my speakers. I had to cut them shorter at Home Depot as they were like an inch too long. When metal would have made them much more durable, they were dragged down by the use of plastic. If they were metal, I would have paid for a design like this, in order to instill more confidence in their strength. It's not hard to complain about a $5 per bracket if you keep the weight down on these things.
👤If your speakers don't come with a screw that can be used to add these to a mount, you'll need something. This does not include a screw. There are two more If you are going to purchase thumb screws to add the speaker to the mount, make sure you get something large enough to turn, but small enough to not interfere with the mount itself. These are not up and down. The size of the screw that needs to be used to mount your speaker should be taken into account. The holes in the mount seem to be larger than they should be. I had to screw the thumb screw through the plastic as well. There are five The speaker seems to be a bit too flush with these. Depending on where the wires are attached, the mount can interfere with that as well.
👤These are budget solutions for mounting satellite speakers. I needed to mount some of the Minuet 5's. The plastic was thick enough to mount them, but the center hole was small for that application. The drill fixed that. The fit and finish was better than I had expected, and the mounting instructions were clear. Hardware to attach the mounts to the wall, but not to mount the speaker, is included. You should buy mounting bolts and a washer for the speakers at a hardware store.
👤These are for mounting my new surround sound speakers. There is no way to screw a screw into the speakers with the plastic case speakers I bought, so it is a waste of money. I will have to either glue the speakers to the mounts or use 3M tape to hold them in place if I want to use them. They look good for speakers. The instructions are not very clear.
👤I bought these when I bought the Z906 5.1 speaker system. The system does not work out of the box. The two biggest issues are here. 1. The speakers I have are not big enough for the bolts that attach them. I don't know the exact specifications, but the non-technical description states that the speaker hole is too big for the included bolt, so I would need to buy a bolt that fits the speaker, then drill out the mount. 2. This is specific to the speakers I have, but could also be for others. The speaker can't connect because the wires are in the way, because the mount covers the wire holes. I could mount the speaker upside-down, however, there are words on the front of the speaker that would make me crazy, but the material seemed okay.
The brackets for the dual sound bookshelf satellite speaker mount are compatible with brick and stone walls. Max. The capacity is 7.7 lbs. The tilt up and down 20 degrees, the left and right 70 degrees are versatile. The sleek knob design is complemented by a sleek reinforced black coat for a contemporary appearance. Sturdy mount to wall is ensured by metal inner construction. 2 x WALI Speaker Wall Mount brackets, 1 x mounting hardware kit, and a User Manual are included in the package.
👤These mounts were purchased to mount my rear speakers. WALI sent me a mount that had holes drilled into it. I used the included screws with the original mount for the rear speakers because the included screws wouldn't fit into the rear speakers that attach onto the mount. Unless you install the mounts upside down, they won't work. I've used this configuration for now, but I'm worried that the mount may slip off at any moment and damage my speakers. I wouldn't recommend the V-Series satellite speakers.
👤I mounted the set of speakers on these. The speakers are very small and keep the speakers close to what you are mounting. They are a little plasticy. I believe they will hold up for small speakers. They should be more resistant to being tilted once set into position. The cleaning lady will force a rag over them. I wish they had more range. If you need to make changes to the speaker mount, the brackets are easy to modify. I had to use my own M8 screw for the back of the speaker. They are very small and clean looking.
👤I mounted an HD antenna and not a speaker. I had the ability to pivot the antenna.
👤These and another mount were ordered for a couple dollars more. These were far inferior to the others. The provide only one size screw, no washers or altrenate connection methods. The screws are too small to mount my speakers. The method for holding the speakers in place was not a nut but a flimsy plastic on plastic connection that is hand tightened on the top. The speakers were about 5 lbs heavier and had to lean from vertical by 5 degrees, so it's difficult to get in the desired position. I used washers and bolts to attach them, but I am not sure they will hold. The back of my speakers didn't fit the footprint of the device, which is required because they don't give you any accessory hardware. Unless you know the above issues will not impact your situation, it's not worth the few dollars in savings.
👤The speaker mounts work for my speakers. 1. You receive two of these, with screws and mounting hardware, and you can order a four kit. 2. The two piece system has a metal plate with two screws holes for installation. You use a tiny screw at the top of the main piece to tighten it down after it slides over the metal piece. The global and crew system here is not expansive so if you are looking for something you can't really move around this will not satisfy you. I think this is enough for most needs. I don't think this is good for heaver speakers, I have not had any issues with the speaker moving down. Light small satellite speakers will work with this. In my case, due to my speaker, I had to go to the hardware store for additional hardware, and that was in my case nuts. These are well-priced and good mounts. It is really good, but it is not perfect because of the heavy mounting requirements and the awareness that you may need to get nuts. It was very well-priced.
It's perfect for indoor or outdoor use. The techsol TSS1 has tilt and swivel to allow for optimum viewing angle and level. The universal wall mount for home cinema/satellite style speakers with single threaded insert fitting is called the TSS1. The install kit includes screws for the majority of speakers. The design is sleek and appealing. The speaker will fit if it has a single rear entry fitting with M5 metric threads.
👤The mounts are not compatible with the speakers. The mount package does not include a bolt that fits the speakers. The mounts will cover up the speaker connections. To use these with that system, you will have to drill your own new holes and use your own larger bolts. For more information, see the picture. Pros and cons of the mounts alone: Tough plastic will probably hold more weight than it is rated for, and good range of angle adjustment, about 90 degrees horizontal and 15 degrees vertical. The speaker must be taken apart to mount, which may be a puzzle for some, and the speaker must be loosened with a screwdriver to adjust the angle after mounting.
👤I am tired of companies that make good products but don't include good mounting hardware. This product is in that category. The mount is made of plastic and is a good quality. There is a lot of information to find the best position for your speakers. They could spend a bit more to make the hardware worth the price. The screws were not my favorite. I would recommend you use a higher quality anchor from your local hardware store. There is a The lack of variety with the mount on the screw that is attached to the speaker was the only other issue I would call out. They don't include screws that are standard. Overall, I think it's a solid product, but it deserves a single star drop because of those items.
👤The price was great. The only reason for not giving a better rating was that my Polk Audio speakers are not compatible with the bolts that come with the kit. I had to buy the correct hardware. I had to make the hole larger on the brackets by drilling it out with a 5/16 drill bit because I needed 1/2-20 bolts to go into the speaker. I replaced the screws that hold the brackets into the wall with quality wood screws because they started pulling out easily even though the speaker weight was under the max weight. I drilled an extra hole in the brackets in order to run my speaker wire through it for a clean install. If you're okay with the possibility of needing additional hardware with some minor modifications, you can't beat the price.
👤The quality was bad and these were very hard to install. They were not strong enough to hold my speakers. The speakers drooped from where I wanted them to be after I fastened the mounts at the lower end. The mount at the upper end of the speakers was not strong enough and the labels on the speakers were upside down. The mount design made it difficult to install the two halves, you have to take them apart, then try to install the bolt through the top of the first half into the nut at the bottom of the second half. If you buy them, you should use masking tape to hold the nut and make sure the speakers are light.
Speaker mounts for home theater products from Jumbl. In this article about speaker mounts for home theater you can see why people choose the product. Vogel's and Wali are also good brands to look for when you are finding speaker mounts for home theater.
Jumbl, Vogel's and Wali are some of the best brands that chosen by people for speaker mounts for home theater. Find the detail in this article. Tnp Products, Wali and Monoprice are also brands that their products are worth to check.