Best Used Receivers Home Theater

Used 1 Jul 2022 10+ Comments Open

1. Onkyo TX NR696 Receiver Compatible Enabled

Onkyo TX NR696 Receiver Compatible Enabled

There is a soNOS COMPATIBLE. You can join your existing system or start a new one with this Onkyo receiver. The AVR can wake, change inputs, and play at the desired volume from the Sonos app. A smart appliance. This is the center of your entertainment system. You can stream from a number of music services as part of a multi-room system. Works with a lot of things. There is a search engine called the GOOGLE CHROME. Music can be played and controlled by voice with your smart speaker. You can control the way your apps play back on your phone, iPad, or laptop with the help of Chromecast. The DTS ATMOS. A virtual surround and height effect can be created with the help of the Dolby Atmos Height Virtualizer. Sound mapping in the formats provides effects to move from speaker to speaker. 5.1.2-ch. It is a CERTIFIED SELECT. Movie night can be taken to the next level. The reference volume level of a commercial theater in rooms where the viewing position is less than 10 feet from the screen is the same as it is in the rest of the building. Certified Select is a W/ ThX.

Brand: Onkyo

👤I was recommended a Denon and gave it a try. I didn't think the Denon packed enough punch. Dialogue and music were not as clear as they used to be. The speaker calibration was done when I hooked up the 888-276-5932. The sound of the two receivers differed. Everything sounds better on the Onkyo. After 15 years, the sound from my old Onkyo still works, but I've upgraded to a more convenient setup that uses HDMI. The mid range Denon receiver is not certified by the THX, but Onkyo's is. The best sound seems to come from every mode. Apparently, Onkyo addressed past issues with "refined HDMI grounds". I haven't had any issues with it yet. The picture looks great with the help of Dolby Vision. I have a PC that I am using to play a 4k blu ray player. I like the Onkyo remote. It's nice to have the ability to adjust tone and boost voice. I would like it to be back-lit. It seems that back-lighting is becoming less common. Maybe to make prices more competitive. There's nothing I don't like about this receiver at the moment. If there are any issues that come up, I will update. There was an update on 11/10/2018. I'm seeing video black outs on multiple HDMI ports. All three of my devices have the same issue with different devices, so far I've only used stream box, PC, and BD/DVD HDMI ports. The audio will continue playing even though the screen will go black. Sometimes I lose the signal completely and have to plug it back in. The 4K Fire Stick plugs directly into the port so there's no cable to question. If it happens once a day, it's still a problem. I'll be contacting customer service and hoping to find a fix rather than sending it in for repair. There was an update on 6/24. I'm happy to say that after a few updates, I'm no longer losing signal with HDMI. I haven't had to plug the receiver in when I switch devices. There were no cable or device changes. Sometimes there is a handshake issue that can be fixed with the remote, like when a device starts up in a game and then switches to a stream box. I gave it one more star for their efforts, but still not a solid 5 star because of the initial issues I had and minor problems that still exist. I don't regret buying the sound and features. A shaky start but I'm happy with the price.

👤My Pioneer burned out, so I had Onkyo receivers. State of the art electronics and great sound are what Onkyo gives great value for. I replaced my stereo two years ago. I bought another Japanese company's product because I had built my own receiver before I went to the world of audiovisual equipment. The last incarnation had funky software, but it sounded good. The internet interface was not bad, but the programmers were not good and that is what a director of software development would say. The hardware was willing, but it was not stable. The interface was terrible. The collection of great electronics has been sent packing. I am back to Onkyo with a gently used receiver for sale. Onkyo's software is perfect. The software works well. The interface is clean and the chip sets are very good. The sound is clean and crisp. All the chips used are of the highest quality. The implementation of the latest codexes is tied to first rate audio electronics, so I think that Onkyo's implementation of the latest codexes is more expensive than the other guys. I'd have been happy with the A/V, but now that streaming music is de rigeur, it has to be said that Onkyo's has a simple interface to navigate the internet using a handful of the more common audio streaming software. The unit works with Air Play, which makes it very easy to stream music. I can't remember the name of the portable equipment it works with, but it works with recorded sound. CDs have more glassworks in the treble than the midrange. I like jazz and opera because of their precise reproduction. It is relatively easy to adjust the output of one's music, even if it is for a different style of music. I wanted to see if I could use the subs. The Onkyo is great from vinyl to CD to streaming the operas from the Met. Traveling Wilburys sound like them. The video sound is perfect. The Onkyo supports all the latest codexes. It's very satisfactory to play a Lucasfilm movie using the settings. I have a vaulted ceiling in my room, so it's not much of an option. I like the sound of alternate types of audio delivery, but I feel like I'm missing the true Atmos experience. I don't care. I am very happy with the 7.2.1 setup. I was impressed when I emerged. I'm not trying to fill an auditorium and I'm sure this unit wouldn't be able to push that much air. Atmos is more of a tech spec than an actual must have. This is enough to give me a completely immerse experience that is truly amazing. I am sure there are drawbacks. I have not run across any. Give me a smooth interface and I am happy. I could not do without net-based music streaming. It's good for the one application I use, but it's much easier to stream my music via Air Play from my office. I am a thoroughly lazy sod. At some point I may add a portable speaker. Probably not. Is it a recommendation? I am very happy with this unit. I would only have to buy a bigger house if I had a bigger unit. Is that an audio engineer? Over the years, reading reviews of stereo equipment has been unreliable. The Onkyo will fill your ears with waves. Is the sound similar to being there? Be serious. Is it the same as being in a theater? Unless you bring in a pack of feckless teenagers wrestling and giggling as well as snuffling children. It's actually quite close. You are searching for great sounds at a reasonable price. I like it more than the other guys. Not a pioneer. Pioneer and Onkyo are the same people. Good luck. Good shopping. Have fun. If you watch a movie on an old CRT in shades of gray, you will begin to feel like you're in a movie theater, and I'll be happy to have a theater in my living room. Go away. There are things I have to do.

2. 5 2 Channel Hi Fi Bluetooth Stereo Amplifier

5 2 Channel Hi Fi Bluetooth Stereo Amplifier

There is a Canal. The home theater receiver from the Pyle is perfect for your system. It gives you 1000 watt peak power to be used for speakers and subs. The Bible has a Bluetooth-compartment. The professional integrated high powered stereo receiver is equipped with a wireless music streamer. It works with smart phones, iPad, and computers with hassle-free receiver pairs. The 4K Ultra HD TV support is included in the digital amplifier box. You can connect and stream audio/video from external devices. There are EQ controls. 2 14” mic inputs are included in the home amplifier. Next generation audio technology and controls for echo, bass, treble, microphone and volume adjustments are included. A digital display. The home theater surround sound receiver system has a built-in display. Features front panel control center and over current protection. Includes remote control.

Brand: Pyle

👤I don't like the bright blue light when the unit is on, but I hate it when you turn it off with the remote. Looks like the cops are outside your window. The only way to stop it is to push the "off" button on the unit. Who was the "bright" idea? I don't like the fact that you have to cycle through the menu to get to HDMI every time you turn it on, and it seems like it should remember where it was and go back to that. You have to go through several different options to get to HDMI and the desire TV picture, and then switch to a different sound option because it sounds like static on the HDMI. It's ok once it's on, but I wouldn't buy it again. I would never have bought this unit if I had seen it in a store.

👤If you really want a bright blue light that never goes off when you turn off the unit, then you should not buy this unit. When I inquired about the indicator on their website, they only said it was a backup. There was no solution offered. I wanted to save a few local stations for preset. There is no information in the manual or online. The online support person didn't know the answer to the fundamental question, so I was told to create a ticket to advanced support. I don't like returning items, but this one may be the last one. Terrible support. Very annoying.

👤The unit works well. The price is great. The remote doesn't seem to work beyond 10 feet if you want to change a setting. The blue light on the button could be turned off. The light was covered with white tape.

👤This review was good. I would have given it a great rating, but a few things weren't as I thought. The surround sound is not a real sound. It doesn't do digital. It doesn't support DTS. The blue ray player won't play the video with the sound on. The sound is similar to a card in bicycle spokes. If I turn off the surround on the TV and use an optical cable to connect my stuff to the TV, it will work. Quality sound can be heard to 5 channels. I paid less for this unit. A unit with all the neat stuff for surround sound would cost a lot. I would make sure my friend knew that the receiver doesn't do real surround sound.

👤It is easy to hook up components.

👤One speaker output was bad and would output static. Returned immediately for a new unit. Any output of 5.1 would only output static. We're outside of the 90 day window, so we won't refund or replace now. Terrible customer service. Avoid this at all costs.

👤I didn't buy this receiver thinking I would get something great. I needed a budget receiver for the guest house. The build is fairly solid, but the sound quality is okay, the display is dim, and the blue power light is too bright. I returned the first one because I thought they were defects, but the replacement one does the same things.

3. 5 2 Channel Hi Fi Bluetooth Stereo Amplifier

5 2 Channel Hi Fi Bluetooth Stereo Amplifier

The 5.2 Channel hi fi Home theater receiver gives you 1000 watt peak power and lets you enjoy high quality amplified audio. The Professional Integrated high powered stereo receiver is compatible with today's latest devices, including smart phones, iPad and computers. 4K Ultra HD TV, 3D and Blu Ray video pass through support with dedicated RCA sub output, and connect and stream audio/video from external devices via the included 3 HDMI, optical/digital audio, and USB ports. The Home amplifier has 2 14” mic inputs with independent input source selection. Next Gen Audio has sound processing technology and controls for echo, bass, treble, microphone and volume adjustments. The Home theater surround sound receiver system has a built in digital display and AM/FM radio, as well as a front panel control center.

Brand: Pyle

👤This is my first home theater system. The price point was the selling ticket for me and not wanting to spend a lot having already spent $500 on the klipsch 5.1 reference theater pack. I don't know what the negative reviews are about. You have to use 2 remotes because your tv doesn't support them. It took me less than an hour to set it up. I'm not sure if all the issues people have reviewed about using the ARC function are true, I'm using the cheapest smart tv that money could buy 6 years ago and I am currently experiencing zero issues. The individual channel control allows you to set the speakers to what you want. The microphone is a default option that doesn't change things for you, even if other more expensive models have a microphone to set up the speakers. It would be nice to be able to glide through radio channels without stopping, going to make setting preset a real pain in the butt. I will live because I got what I paid for. The unit's fan is whisper quiet, and the remote gives full operation. I am happy with the price. I might upgrade later. I'll update if anything changes.

👤I bought this unit to be able to use my Bose 701 speakers to output audio from my TV. I am returning this unit because it's 1. I have a dated but working home theater receiver. I used the digital optical to send the audio from my phone to the Bose speakers. I was able to get this unit to work with the TV as well. The basic function of getting audio from the TV to the Bose speakers was accomplished with both the JVC and the Pyle. 2. I was able to control the volume with the help of the Xfinity remote. I had a single remote that allowed me to do everything. The same could not be said for the other person. There was no code that would allow the remote to control the volume. 3. The manual talks about an audio return Channel that will allow audio to be controlled from a single remote. I spent over 45 minutes on the phone with technical support, but they couldn't show me how to connect the unit with other than an optical cable. They recommended using optical and left me with the impression that it doesn't apply to this unit. 4. The display function on the remote and unit is discussed in the manual. There is no button on the remote control. This unit may have other benefits, such as 4K HD integration, but my interest was solely to find a newer receiver unit with the potential of future 5 speaker Dolby that I can immediately use for audio to my pair of Bose analog speakers from the TV and to control it all with a single The receiver can't be used with the remote.

👤If you use the Blue tooth device, the surround channels won't work, so you won't get full 5.1 sound. Unless my receiver is malfunctioning. The receiver shows an error when I try to turn up or down the speakers. I thought it might be my wiring, but I connected the radio to the antenna to see if it would play 5.1 audio. I love the remote's ability to control each channel separately. I really like this receiver.

4. Sony STRDH190 Stereo Receiver Bluetooth

Sony STRDH190 Stereo Receiver Bluetooth

Enjoy your home audio experience in the comfort of your home. 100 watt x 2 watt. The speaker impedance is 6 to 16. 3.5 millimeter input, stereo RCA output, and Phono input. You can stream your favorite music service, podcasts, and more from other devices. A/B can switch to play all at once, or in separate zones. The low profile design is easy to fit into a conventional cabinet. There are 30 station preset on the radio.

Brand: Sony

👤I've owned some very nice and very poor stereo receivers. I would give SONY high marks for design and build quality, but that's not the case with this receiver. I want to know how fundamental is something as a speaker connection. There are many tried and true methods, including screw-down binding posts and banana-plug connectors. The cheapest version uses the "clamp-down" version. Sony has taken this cheapness to a whole different level. Read on. Most of us know to use decent speaker wires, which have a decent amount of wire within the insulation, but "monster cable" is the exception. It's the same diameter as appliance electrical wire. I tin the tip of the wires to prevent them from unraveling. Sony made it impossible to use good speaker wire on this receiver. The cheap "clamp" type connector is not a good speaker wire and the opening is not large enough to fit a paper clip. Look at photos. The old Radio Shack receiver that this unit is replacing had good speaker wire connection posts. I had to cut one of the fingers off of the electrical connection so it would fit into the tiny space when hook-up time came around. I'm thinking of returning the entire unit. This is an example of a product that is not going through any quality assurance testing, especially by engineers in charge of designing the unit. I am not surprised that Sony had nothing to do with this receiver. It happens all the time. If you want to purchase this cheap receiver, you will probably have to use speaker pins, and I really dislike these things! There is a speaker with plugs and a speaker with connections and pins. Tome is in charge? That's on the remote control. How about a pair of headphones? Again, on the remote. Almost all of the "critical" adjustments are done on the remote control. If you misplace the remote control, get it wet or break it, you're SOL in regards to operating this receiver. You might think of ordering a second one just in case. I prefer to have actual KNOBS on my receiver for low, mid, and high frequencies, as well as some other critical functions such as loudness, tape monitoring, etc. Sometimes you don't get what you pay for. As this receiver seems to be in the marketing advertisement and from other "reviewers", you might want to broaden your search to include a different manufacturer. This is not the Sony I used to know.

👤I needed to replace my Yamaha receiver from 30 years ago. I was looking for a receiver with a phono input that was reasonably priced. I settled on this Sony and have been happy with it. It was easy to set up. You can plug in a phono jack with grounding wire and add additional inputs. You can use the remote control to change the inputs. Speaker wires can be put into the back of the clamps. The sound quality is good. Once the wire is tightened, the phono doesn't buzz. Everything is balanced through my speakers. My old receiver didn't have a feature that allowed me to pair my laptop with it and play my library without interruption. It works as well as the other way around. There are a few cons about it. You can only pair it to one device at a time, not both. I have a home clock and radio that is available online, but I don't think it's a big deal. You can use the remote to access preset on the radio. You can have up to 30. You need to hit the forward button on the remote or scroll with the on board knob. The tuner scans slowly to find stations. If it's not important to you, this makes for a very solid home receiver and very reasonably priced.

5. Sony STRDH590 Multi Channel Receiver Bluetooth

Sony STRDH590 Multi Channel Receiver Bluetooth

You can enjoy your favorite movies, TV shows and more in the comfort of your home with Cinematic Sound at Home. S Force PRO delivers virtual surround sound with only a 2 speaker setup. You can use your phone to stream music and use a Standby turn on the receiver. A multi function system includes a multi channel stereo setup, a radio tuner and a headphone jack. There are 4 stereo Rca audio inputs and 2 digital audio outputs. In the box is a microphone, remote control, batteries, and a wire antenna. Also, note: Installation Manual and User Guide can be found in the catalog. Also, note: Installation Manual and User Guide can be found in the catalog.

Brand: Sony

👤I never leave a bad review, but this receiver did not allow for the full experience of the game. If I plugged my TV into my XBOX One X, it would be capable of playing both video and gaming. The build quality is good, but the lack of AUX-in was disappointing. I picked up the Yamaha after returning the Sony. It's $50 cheaper, has tons of more features, and has an AUX-in feature that I've wanted for years, and it passes the tests of both Dolby Vision and HDR10 correctly. Pick up the Yamaha, you'll be happy you did.

👤I put together a simple 5.1 surround system in my small den based on a Yamaha amplifier that started to go a little weird - it would turn itself on and off, sometimes wouldn't allow volume control from a remote, and sometimes wouldn't have picture resolution dropped. The sound was pretty decent. I decided to swap out the amplifier for the Sony one. Wow, what a change! It was easy to set up and calibrate. The sound stage is very detailed. It makes my speakers sparkle with clarity and crispness. I'm not a snob and my ears can still see a huge improvement in movie watching at a cheaper price. You will like this amplifier.

👤Great inputs. Good power. 60hz pass through. The enhanced HDMI option can be enabled. Arc control. I like it. The surround left channel is dead. The receiver died not even two years after the event. I'm disappointed, and that's coming from a Sony fan. My last receiver was from Sony. This was brought down from 5 stars to 2 by me. I think I'm buying a Denon.

👤I have an old entertainment system with a center and surround set that I use this unit to drive. The unit sounds good even with questionable speakers. I listen to my music on my phone. I use it. I know that makes many people cringe. I used the automatic calibration to set this up. Mozart's 25th was put on by selected music surround. My wife could hear how much better this setup was. Everything was in balance. It had a rich sound and clear highs. The surround did not sound fake. It was like sitting in an orchestra pit. It sounded great to have DVDs and cable TV. I can't hear the voices. The Movie HD-Digit setting is clear and easy to understand. There is a night mode that makes it easier to understand voices. The unit works great out of the box. It is powerful enough for a small home office, and I have it set up there. If you want to annoy the neighbors, you might need a bigger unit. I am very pleased with this purchase, and I love it.

👤Sony got it right. The receiver has 4K and HDR pass-through. The inputs are 2.2 compliant. It is easy to set up. The power is at 145W per channel. It will expand to 5.1 soon if you hook it up to a couple BIC tower speakers and a Dayton Subwoofer. There is no rush because the Front Surround feature really makes 2.1 sound like real surround. I couldn't be more happy with my purchase because it's heavy and built like a tank so it should last. The seller was praised for ordering on Monday and being delivered on Wednesday.

6. Bluetooth Home Audio Amplifier System

Bluetooth Home Audio Amplifier System

Powerful 750 watt motor. The 750 watt peak power of the 6 channel home audio amplifier can be used for multi speakers and allows you to enjoy high quality audio. It's perfect for your home theater entertainment. Bluetooth capital is available. The personal portable digital amplifier box is compatible with today's latest devices including laptops, tablets, and phones, as it is equipped with a hassle-free receiver. There are multiple intrusions. The integrated indoor stereo receiver has a built-in FM radio with a digital display and audio input. Also has 2 14” microphone inputs. There is a talk-over function. The professional sound amplification device has a MIC talk-over function which will temporarily stop the current music or audio being played. This function is used in announcements. Integrated equity: The amplifier has buttons for the audio sources, a knob for mic and master volume, and a button for the selectors. A remote control is included in the package.

Brand: Pyle

👤The volume knobs are difficult to use. It takes quite a while before the sound comes out, and it's almost impossible to find the volume that I want, because the volume starts increasing so fast. The knob changes the volume very little when it gets to a certain level. The instructions are not any better than the remote. Trying to figure out how everything works. The included FM antenna isn't good at all, and there are no external antenna hookups. There is no timer shut-off function. I've been unable to get the features to work. There is a The user manual is poorly translated and offers little information beyond restating the unit's features and no guidance as to how to manipulate them. The ability to select inputs on the display with the buttons or the remote does not play well together. I can't change inputs without adjusting them. The remote only works to turn the volume off when listening to the radio and not AUX, and only when listening to the radio and not AUX. The remote volume increment is wildly inconsistent. Sometimes there is an increase of one increment and no change, and sometimes there is a big change with Dash going from volume to two volume. There is little to no control over this piece of junk unit, it is loud and not subtle. The local stations must've been scanned and saved by the radio station, which is good, but after a while of trying to figure out how to set the preset, it's difficult to pick up. I only added preset of static. There is no service for customers. Customer service is not poor.

👤I like the receiver. I've been looking for a compact multi-channel stereo amplifier for years that will fit into a shallow cabinet in my hallway and allow separate speaker zone control with ease. I like the separate volume controls for each channel. I have a shop with one channel running speakers, another running speakers on my patio, and a fourth running speakers in my living room, but I will eventually use another channel to run speakers in my kitchen and possibly a pair in my living room. It was easy to setup. I have had some issues with the unit, but it probably has more to do with my phone than it does. There are only two suggestions to improve this unit. The location of the sub-woofer outputs on the back of the jack is indicated in the instructions, but they don't give any details about them. I don't know if the sub-woofer outputs us dedicated to a specific channel or if it is shared across all six channels. Adding an explanation to the User Manual would be great. I have limited range when using the connection. I know that the problem is mostly due to my placement of the amplifier within a cabinet and the fact that there is an exterior wall between my phone and the amplifier. The extendable antenna is basic and functional, but it doesn't seem to be something that could be upgraded. It would be nice if the antenna on future product versions were removed and replaced with an upgraded or powered/amplified antenna, like the way they can be in a wireless device. I'm satisfied with the product and look forward to using it. If anyone is interested, I will update this post with my findings once I find the time to connect a sub-woofer. When I have my patio speakers running on Channel A, the sub-woofer I have connected in my shop is playing even though the shop speakers on Channel B are turned all the way. The design is not the best, but it's still a great unit.

7. Denon AVR X3700H Ultra Channel Receiver

Denon AVR X3700H Ultra Channel Receiver

You can enjoy Immersive surround sound with the help of the new 3D Realism for your home theater system. You can enjoy high quality audio and video when you are ready. This amplifier can be used to build your own speaker configuration to meet your entertainment needs. The next generation of gaming features a smooth, lag-free experience with 4K/ 120Hz pass-through, Variable refresh Rate (VRR), Quick Frame Transport (QFT), and Auto Low Latency Mode (ALLM). Enjoy the most advanced video technology. Quick Media Switching eliminates video delay and this 9.2 channel receiver delivers clarity, contrast and color. You can connect with any HD/ULTRA HD TV, SubWOOFER, BLU-RAY PLAYER and Turntable for Incredible Stereo Sound with a range of wireless connections. You can add music to any room in the house with the help of wi-fi, Airplay 2, and HEOS multi-room wireless speakers. You can get hi-fi audio around your home with a number of services. Instructions to connect your TV and Audyssey MultEQ XT32 are provided by ON-SCREEN SETUP ASSISTANT. calibrates all speakers in your home setup and tunes the A/V for an optimal listening experience. Does not support pass-through from 888-739-5110

Brand: Denon

👤31 days ago. It sounded wonderful but it wasn't able to play at loud volumes. It overheated if it was over 50 volume. It's in protection mode with no speakers. Amazon won't accept returns on this item, so they know it's junk. Denon is bad. I'm out 1300 dollars. I sold my Yamaha which worked perfectly for many years. It was replaced after Amazon returned it. I bought it because it doesn't work with HDMI 2.1 devices. You get no signal when you set it to 2.1. They suggested a way to fix it, but it doesn't work for me. I can get a signal from my 3080 graphics card to the TV, but it disappears when I plug it into the receiver with eArc. The test feature of the receiver doesn't work with the cables I bought. I can test the same cable 10 times and it will fail or fail again. I can confirm that the Denon receivers don't process Atmos signals often. It seems to be random. I can watch a movie one night and get the next one in 5.1, but it won't do 5.1 when nothing has changed. Sometimes it will use the front, sometimes it will use all 9 speakers, and sometimes it only uses 4 speakers. The receiver is junk. It sounds good, but my 500$ Yamaha was better. I used it every single time. It had a better remote. I will never buy another Denon again. Denon released a fix for the bug. It's a good box. I thought they would give more connections, but they only gave one. The new Apple TV 4k has 2.1 but there is no way to use it because Denon doesn't give us more HDMI 2.1 ports. I pay for 4k 120hz on my PC with horrible handshake issues. The receiver cuts in and out and doesn't display video. I have to restart my devices at least once a day. I paid a lot of money for this receiver and I got headaches all the time. I'm going to upgrade to a quality receiver to enjoy my gear. The hand shake issue is out of hand. I'm now doing it 30-40 times a day. I've tried every combination of turn on order, but the stupid box is the only thing that works. I have to use eArc on my devices to get it to recognize my display, so I have to restart my device and remove all my cables in 15 minutes. I can't wait to sell it. It doesn't sound good anymore. The volume is noticeably quieter and I think some of the capacitors are going bad. It appears that Atmos is random and not based on the input signal.

👤Pros- Excellent sound quality with an option of 11.2 channel processing and 2 channel amplifier. There is a This unit has a future upgrade version of hdpi. The Audyssey set up only gives phase error for certain speaker types and each result is over ridden. I wonder if Audyssey 32 is flawed because the results yield different points each time. The most important thing about this unit is that it cannot turn off internal amplification while you use an external amplifier for 5 channels. The internal amplification of Denon cannot be maximized if you use 9.2 or 7.2 Amp mode. A rep should answer the question of how users can use a 7.2 or 9.2 set up and still be able to assign denons unused internal amplification to use towards channels not run by an external amplifier. The best receiver money can buy for the top ones in the year is probably this one.

8. Denon AVR S760H 7 2 Channel Theater Receiver

Denon AVR S760H 7 2 Channel Theater Receiver

The Onkyo TX-NR5100 has a network A/V receiver with a 5.1 channel. Enhanced realism and new features are available. You will think it's happening right above you when you hear the sound of a helicopter or rain. 7.2 channel, 75w (2 channel driven), 6 HDMI inputs, 1 HDMI 2.1 output, and a Phono input. There are 3 dedicated HDMI 2.1 inputs with 8k up scaling. Most voice assistants have support. 8K UDH, HDCP 2.3, HDR10+, Dolby Vision, 4k/ 120 and eArc are included. Includes a microfiber cleaning cloth.

Brand: Denon

👤All speakers have been updated, and I am a huge star wars fan, and Disney plus Silver screen will debut on their new shows in atmos, not to mention family movie nights, every friday pizza and movie night. I had the chance to screen the same clip over again in different sound modes on the ATMOS receiver, but it's dependent on the movie sound mixer and editor, if just straight dolby digital or 7.1 sounds, it will give you more. I did that with a KLH Platinum series and I ran 200ft of speaker wire to complete the project, but I wanted to make sure I did it right, so I kept an eye out for them. There was a learning curve involved and many hours of video on sound stagging, angling, ideal setting on placement and what room correction software would allow to speaker selection, to ATMOS vs DTS-X to 5.1 vs 7.1 vs 5.1.2 vs 5. I think so. Is it the best system you can buy for about $1200 in total or so including speakers and receiver, wire and mounts? Black is available at the Amazon.com store. I got these for $101 and could use another set of rear speakers, but I have to spend more on mounts as the Sony setup is pretty verstile on top of the front speakers wall and ceiling, so it becomes more of a wash. I found the best place for my room to be tilted down was in front of the main seating 8ft high, since my ceilings are carboard tile, and mounted on the front wall. Is there a second one, the one next to my loveseat, for the rumble effect? Sony SACS9 10-Inch Active... I added a front sub to make sure it was over kill, but I had already decided on the spot. 60 hertz for a bit more money than a 4k 120 hertz receiver, and HEOS which intergates internet radio in the mix from google to alexa, to air play 2, and its app that allows you to manually tweek. The Denon AVR-S760H is a 7.2-Channel Home.

👤This is a great receiver for anyone who wants a good quality receiver. The power is relatively low. It's ok for a basic 5.1 speaker setup, but it might be a bit lean in a 7.1 or 7.2 setup. A 4 cyl engine in a pickup truck is an example of a good analogy. The low power of the receiver deterred me from using it, so I can't speak to ease of use. Denon is a good receiver, but it is important to match your speaker setup with the right one.

👤The unit has been great so far. It's easy to set up. It's easy to change the setup, but I need to work on the connection.

👤Excellent sound and no problems to report. Can't go wrong here.

9. Onkyo TX SR494 Receiver Ultra Dolby

Onkyo TX SR494 Receiver Ultra Dolby

160 watt per channel. 4K/60p and HLG are supported. 5.1.2-ch audio and video. The Virtual:X and the Height Virtualizer are from the same company. The AccuReflex and AccuEQ have subwoofers.

Brand: Onkyo

👤When the PS4 Pro is connected to the TV, the option for 4K RGB is disabled, as you can see in the picture, and the frequencies for HDR are not the max, but when the PS4 Pro is connected directly to the TV. Check the message that says to check the TV settings. If you are going to use it for games, get something else. When I try a game, I get a warning that the game will play at 2K, but I don't see it because the TV isn't the receiver.

👤I have a set up in my home theater that is awesome. 2 front speakers, 2 ceiling pivot speakers, 2 rear surround speakers, 1 center channel, and 1 subwoofer are all expected to be upgraded soon. I've seen a lot of people flaunt their 2 and 3 thousand dollar setup but this receiver does exactly what it is intended to do and I have been buying Onkyo products for years and have not been disappointed yet. It can drive my speakers without being loud, and it can reproduce the sound of the movies in Dolby Atmos. My only regret is that I didn't get a 7. A receiver. I wanted to add 2 more speakers to the theater seating area. Maybe upgrade later. This is a great buy for anyone who wants a good Atmos setup in their home.

👤I had a 13 year old boy. I thought it would be a great upgrade since it supports all of the new sound formats. I was very excited when I got this. The result was disappointing. The sound was flat. The voice was muffled. I re-ran the setup again and the same thing happened. The Audyssey used on my old Onkyo is called AccurEQ. There was a manual setting on my old Onkyo, but it was not possible on this new one. Each time I ran the setup, there was a different one. It has a lot of bells and whistles, but I didn't like the lack of sound quality. I ended up spending over 2x as much as I would have spent on a Yamaha, but I'm very happy with the speaker calibration and the various profiles it offer out of the box, and there's also a graphical manual EQ. I didn't like this receiver. I wasn't happy with the sound quality.

👤Unless you have a lot of devices, this is all you need. I replaced an older unit with this one. The older unit had all the inputs that were never put to use. This is perfect for 4 devices. The sound quality from this unit is perfect once you start using it. It's better than the best movie theaters. The sound quality of the audio is not as good as it could be. The sound is the same as you get from the high end Onkyo units, even though it has the same 32 bit sound processor. I only use it for the two gaming consoles. I don't play music in the house. If you are looking for a high quality home theater sound system that is only going to be used as a home theater system with 4 or 5 devices, this is it. If your TV can pass HD sound, you will be able to hook up 5, 6 or 7 devices to this, depending on your TV's inputs. It does work very well with 4K upscaling. The HDMI pass through works perfectly, but the features are not real. The problem is that the standard is too new and not standard, so there are device conflicts. This is a great unit for anyone who doesn't have a lot of audio devices. Who does now?

10. Pioneer VSX 534 5 2 Ch Virtual Bluetooth

Pioneer VSX 534 5 2 Ch Virtual Bluetooth

There is a playback in the movie. The next-generation audio codec from DTS is called Dolby Atmos and it uses object-based audio to enable new interactive audio experiences. Bluetooth is a company. You can connect your phone, PC, or tablet to the receiver with the help of the technology. Whenever the smart receiver sees an incoming audio stream, it starts playing. DOLBY ATMOS. Without using additional surround or height speakers, the virtual surround and height effect can be created. 5.1.2ch. The personal preset. Press the personal preset button on the front panel for three seconds to change your settings. Up to three preset can be called up from the front panel button or remote control. RANGE CONTROL. You can use the up/down key on the remote control to make independent volume adjustments to the range, including dialogues in films, with this unique mid-range sound control feature.

Brand: Pioneer

👤I have a VSX-1130 in my living room and I really like it. I wanted to buy one for my basement, but didn't want to spend a lot. The price is 3 times the price of the 1130 I can't tell the difference in sound. The 1130 has bells and whistles, but the 534 is light and easy to set up. What else would you like? The sound from the 534 blew away the old Onkyo I replaced. Very happy. I would have gotten the 534 instead of the 1130 if I could do it over. Very happy. I replaced my old receiver with a cheaper one in my living room. It sounds better. Still very happy with it.

👤This is a fine piece of equipment if you don't need to use the HDMI connection to your TV. I needed the ARC capability when I bought this to use with my new TV. When the receiver is turned off, the signal will pass through. Problems exist with it on or off. I have a satellite input to the receiver and the ARC connected to it. There is an audio delay when you pause a tv show and start again. When you channel surf or change channels, the output to the tv becomes scrambled and you will lose the output altogether. I had to stop using the tv receiver because it was so bad. It took me a while to realize that the problem was the AV receiver and that I should have connected the tv directly to the satellite box. I missed the 30 day return so I'm stuck with the problem.

👤If you have small space, you're a great receiver. I own a huge Pioneer VSX that is twice the size and weight of the 534. If it's too big to fit in a cabinet. If there is plenty of power and features, a smaller surround can fit anywhere. Unless you wire the unit to the TV to complete setup, you cannot get out of setup mode. I didn't want to use the receiver to run my TV. I only wanted to use an optical connection. I had to run the TV, DVD and Echo through the receiver after the TV prompt. The main front speaker connection allows for 14 gauge wire while the center and back channels speaker ins only allow 16 gauge wire.

👤I wanted to test this receiver out for a while before I submitted a review. I'm very happy with this Pioneer. This was a great upgrade to my old Kenwood 5.1, which did not support the new DTS, and which was replaced by a slightly newer Yamaha that bit the dust after a power surge. I don't like to listen to music but I do like the fact that a receiver can belt out music and a picture with no distortion. The receiver delivers on both fronts. Older and newer CDs are clear. The dialog is clear while the movies boom through my subs. I wish they put a second slot on the front of the device for quicker, more convenient firmware updates and simple mp3 players. Follow the instructions carefully. The website gives more information on the steps, but they require you to turn off HDMI. If you need a receiver in a pinch, this Pioneer is worth the money because it is well worth the money. I put a couple of AC fans on top of the receiver to keep it cool. The previous Yamaha I owned was so hot I could fry an egg. I'm not taking any chances with this one. This application is where the receiver shines, because I bought an Lg UBK80 4k player. The sound of Ex Machina was amazing, with clear dialogue and booming lows of the soundtrack. The explosions boomed when I watched the 4k version of Aquaman. When the Atlanteans shot off in the ocean, my room shook. I am using a Sony sub and a Yamaha sub with Bose surround sound. The receiver made everything shine. For the first time, I could tell that I had surround speakers.

11. Onkyo TX SR393 5 2 Channel Receiver

Onkyo TX SR393 5 2 Channel Receiver

155 watt per channel. 4K/60p and HDR are supported. The film is called x-play. The height virtualizer and the DTS virtual are included. The accureflex and the accueq have subs.

Brand: Onkyo

👤Gamers! If you can't get 4k or 10 to pass through your system, you can use the power button to enhance the channel. Where in the manual do they tell you this? Hold the dvd button down and you will see the receiver switch from std to ench. Your welcome!

👤I wanted to upgrade from my stereo receiver to an A/V system after purchasing a new TV. I decided on this model after doing a lot of research. I had it for about two weeks. The sound is amazing with my Yamaha 5.1 speaker system. I would like to address some things. I went through the initial setup process and realized that my sub wasn't working. I tried to set it up again and realized that on the first screen it shows the sub but not on the subsequence screens. I called tech support and it was answered in under two minutes. This response was typical of every call I made. I was told to return it after walking through the setup. I decided to try a few things first. I thought the speakers were out of phase because I had a hard time figuring out which wire was the negative wire. I turned the amplifier up. It had been the same for a long time. The issue was fixed by one or both of these things. I don't think I'm getting all the sound possibilities listed for this unit. Tech support says it's my device. The 4K Amazon firestick should be able to provide all of those sources. The remote. The remote is moving. The receiver has four HDMI ports. The buttons on the remote correspond to the ports. "TV" is listed on one of the buttons. I want to go to live t.v. when I watch the firestick. The t.v. button does nothing. I have to change the input on the receiver remote by putting it down. To get back to the firestick, I have to change the input on the t.v., pick up the remote and push the correct button. On my old system, I could just hit "return" and it would return to the last item used. It's difficult when you are flipping back and forth. I called tech support and was told that the remote was not a universal one. He couldn't explain why the buttons were there. I don't know what the other buttons are for, since I only got a quick start pamphlet. The most important part is that it delivers great sound, superior to my stereo system.

👤This is a budget receiver. I didn't want a lot of bells and whistles to get lost in, just something simple and intuitive. You need to learn about the sound adjustments and experiment with them. I have a 2.1 setup with two large towers and a 10-inch sub. I prefer to set up the sound myself rather than using the supplied microphone. The Level Calibration allows you to adjust the volume of each speaker set. The line-level out port is something I like about this receiver. That adds to the flexibility of the unit. I use that port to connect my headphones. The remote control is easy to use. I recommend this receiver to anyone looking for a low-cost option that doesn't require a lot of bells and whistles. It is easy to use and sound good.

Summary

What is the best product for used receivers home theater?

Used receivers home theater products from Onkyo. In this article about used receivers home theater you can see why people choose the product. Pyle and Sony are also good brands to look for when you are finding used receivers home theater.

What are the best brands for used receivers home theater?

Onkyo, Pyle and Sony are some of the best brands that chosen by people for used receivers home theater. Find the detail in this article.

You May Like

Share Your Story

Your name:
Choose product to comment:
Write your review:
By submitting this review, you are agree that:
  • Your review is based on fact, honest, polite and not harmful to anyone or any brands.
  • We have full right to show or not-to-show your review after moderation.
  • No spamm please :)
Disclaimer
We might earn comission for your shopping via our links, it doesn't cost you extra. This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com